ICP Vortex GDT8524RZ+BBU

Heinrich Rebehn rebehn at ant.uni-bremen.de
Fri Jan 28 00:30:26 PST 2005

Matthew Dillon wrote:
:atapci1: <Generic PCI ATA controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.2 on pci0
:ata0: at 0x1f0 irq 14 on atapci1
:installed MI handler for int 14
:ata1: at 0x170 irq 15 on atapci1
:installed MI handler for int 15
    'Generic PCI ATA controller' is a bad sign.  What does FreeBSD say the controller 
    is for ata0/ata1 ?

    pciconf -l output (from FreeBSD) on this machine would also help.

    It could be as simple as adding the PCI ID for the particular ata chipset.

					Matthew Dillon 
					<dillon at xxxxxxxxxxxxx>
Attached is the complete dmesg from fbsd.

root at antsrv1 [~] # pciconf -l
hostb0 at pci0:0:0:        class=0x060000 card=0x25788086 chip=0x25788086 
rev=0x02 hdr=0x00
pcib1 at pci0:3:0: class=0x060400 card=0x00000000 chip=0x257b8086 rev=0x02 
pcib2 at pci0:28:0:        class=0x060400 card=0x00000050 chip=0x25ae8086 
rev=0x02 hdr=0x01
uhci0 at pci0:29:0:        class=0x0c0300 card=0x25a98086 chip=0x25a98086 
rev=0x02 hdr=0x00
uhci1 at pci0:29:1:        class=0x0c0300 card=0x25a98086 chip=0x25aa8086 
rev=0x02 hdr=0x00
none0 at pci0:29:4:        class=0x088000 card=0x25ab8086 chip=0x25ab8086 
rev=0x02 hdr=0x00
none1 at pci0:29:5:        class=0x080020 card=0x25ac8086 chip=0x25ac8086 
rev=0x02 hdr=0x00
none2 at pci0:29:7:        class=0x0c0320 card=0x25ad8086 chip=0x25ad8086 
rev=0x02 hdr=0x00
pcib3 at pci0:30:0:        class=0x060400 card=0x00000000 chip=0x244e8086 
rev=0x0a hdr=0x01
isab0 at pci0:31:0:        class=0x060100 card=0x00000000 chip=0x25a18086 
rev=0x02 hdr=0x00
atapci1 at pci0:31:2:      class=0x01018a card=0x511210f1 chip=0x25a38086 
rev=0x02 hdr=0x00
none3 at pci0:31:3:        class=0x0c0500 card=0x25a98086 chip=0x25a48086 
rev=0x02 hdr=0x00
em0 at pci1:1:0:   class=0x020000 card=0x10758086 chip=0x10758086 rev=0x00 
iir0 at pci2:3:0:  class=0x010400 card=0x01dc1119 chip=0x03001119 rev=0x00 
none4 at pci3:1:0: class=0x030000 card=0x80081002 chip=0x47521002 rev=0x27 
em1 at pci3:2:0:   class=0x020000 card=0x10768086 chip=0x10768086 rev=0x00 
atapci0 at pci3:3:0:       class=0x010400 card=0x61141095 chip=0x31141095 
rev=0x02 hdr=0x00
root at antsrv1 [~] #

dfbsd has problems accessing ad1 (hard errors) while fbsd has not.

Is this at all related to the problems accessing the SCSI-RAID?

Another question: I am dual-booting fbsd and dfbsd by pressing F1 or F2. 
Is there a way to control this from remote? Where is the default boot 
selection stored?

Heinrich Rebehn

University of Bremen
Physics / Electrical and Electronics Engineering
- Department of Telecommunications -
Phone : +49/421/218-4664
Fax   :            -3341
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE-p5 #8: Mon Jan 17 10:15:38 UTC 2005
    root at xxxxxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/ANTSRV1
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3000.12-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf34  Stepping = 4
  Hyperthreading: 2 logical CPUs
real memory  = 2147418112 (2047 MB)
avail memory = 2095955968 (1998 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IntelR AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.CSAB - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x9000-0x901f mem 0xe4000000-0xe401ffff,0xe4020000-0xe403ffff irq 18 at device 1.0 on pci1
em0: Ethernet address: 00:e0:81:63:71:85
em0:  Speed:N/A  Duplex:N/A
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
iir0: <ICP Disk Array Controller> mem 0xe6000000-0xe6003fff irq 24 at device 3.0 on pci2
uhci0: <UHCI (generic) USB controller> port 0xc400-0xc41f irq 16 at device 29.0 on pci0
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xc000-0xc01f irq 19 at device 29.1 on pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <base peripheral> at device 29.4 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 29.5 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <display, VGA> at device 1.0 (no driver attached)
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xa400-0xa43f mem 0xe2000000-0xe201ffff,0xe2020000-0xe203ffff irq 17 at device 2.0 on pci3
em1: Ethernet address: 00:e0:81:63:71:86
em1:  Speed:N/A  Duplex:N/A
atapci0: <SiI 3114 SATA150 controller> port 0xb800-0xb80f,0xb400-0xb403,0xb000-0xb007,0xac00-0xac03,0xa800-0xa807 mem 0xe2040000-0xe20403ff irq 20 at device 3.0 on pci3
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
ata4: channel #2 on atapci0
ata5: channel #3 on atapci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel 6300ESB SATA150 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio2: <16550A-compatible COM port> port 0x3e8-0x3ef irq 10 on acpi0
sio2: type 16550A
sio3: <16550A-compatible COM port> port 0x2e8-0x2ef irq 11 on acpi0
sio3: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ad0: 78167MB <Maxtor 6Y080M0/YAR51HW0> [158816/16/63] at ata0-master SATA150
ad1: 78167MB <Maxtor 6Y080M0/YAR51HW0> [158816/16/63] at ata0-slave SATA150
acd0: DVDROM <SONY DVD-ROM DDU1613/9YS2> at ata1-master UDMA33
Waiting 15 seconds for SCSI devices to settle
iir0: BBU status: Normal
iir0: BBU temperature: Normal (30 deg Celsius)
iir0: BBU capacity: Normal (99 % of nominal capacity)
iir0: BBU fully charged. Charge level: 1773 mAh
iir0: Write Cache enabled by BBU. BBU operable
da0 at iir0 bus 2 target 0 lun 0
da0: <ICP Host Drive   #00 > Fixed Direct Access SCSI-2 device 
da0: Tagged Queueing Enabled
da0: 858198MB (1757591325 512 byte sectors: 255H 63S/T 109405C)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s1a
em0: Link is up 1000 Mbps Full Duplex

More information about the Users mailing list