UPDATE: Problems booting an SMP kernel

Tue Feb 8 17:34:54 PST 2005

On Tuesday 08 February 2005 12:05, Matthew Dillon wrote:
>     If this commit had anything to do with making your system work, then it
>     should have reported an error or warning of some sort on the console
>     before successfully booting.
>
>     could you post your 'dmesg' output ?

	I assume that you mean the "xpt" warnings that Joerg Anslik mentioned on 
bugs@ recently?

	I get five of them then it gives up. Here is the output.

	I apologize for the long post.

---start dmesg---
Copyright (c) 2003, 2004, 2005 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.1-CURRENT #2: Mon Feb  7 13:52:06 MST 2005
    root at xxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/SMP
TSC clock: 798980849 Hz, i8254 clock: 1188960 Hz
CPU: Intel Pentium III (801.82-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  = 671023104 (655296K bytes)
avail memory = 640847872 (625828K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
DragonFly/MP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "/kernel" at 0xc0686000.
Preloaded elf module "/modules/acpi.ko" at 0xc06861e8.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdcf0
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using MMX optimized bcopy/copyin/copyout
acpi0: <VIA694 AWRDACPI> on motherboard
installed MI handler for int 9
acpi0: Power Button (fixed)
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
IOAPIC #0 intpin 10 -> irq 2
IOAPIC #0 intpin 11 -> irq 5
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd0000000-0xd3ffffff 
at device 0.0 on pci0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on 
pci0
pci1: <PCI bus> on pcib1
IOAPIC #0 intpin 5 -> irq 10
pci1: <3Dfx Voodoo 3 graphics accelerator> at 0.0 irq 10
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xb000-0xb00f at device 7.1 on 
pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 2 at device 7.2 on 
pci0
installed MI handler for int 2
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 2 at device 7.3 on 
pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
pci0: <VIA 82C686 AC97 Audio> at 7.5 irq 5
dc0: <ADMtek AN985 10/100BaseTX> port 0xe000-0xe0ff mem 0xdb020000-0xdb0203ff 
irq 2 at device 17.0 on pci0
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: MAC address: 00:20:78:11:ff:b7
orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
installed MI handler for int 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
installed MI handler for int 3
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
installed MI handler for int 7
installed MI handler for int 0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ad0: 78167MB <Maxtor 98196H8> [158816/16/63] at ata0-master UDMA66
acd0: CD-RW <Memorex 52MAXX 3252AJ> at ata1-master PIO4
afd0: 239MB <IOMEGA ZIP 250 ATAPI> [239/64/32] at ata1-slave PIO3
**WARNING** waiting for the following device to finish configuring:
  xpt:	func=0xc0146b90 arg=0
**WARNING** waiting for the following device to finish configuring:
  xpt:	func=0xc0146b90 arg=0
**WARNING** waiting for the following device to finish configuring:
  xpt:	func=0xc0146b90 arg=0
**WARNING** waiting for the following device to finish configuring:
  xpt:	func=0xc0146b90 arg=0
**WARNING** waiting for the following device to finish configuring:
  xpt:	func=0xc0146b90 arg=0
Giving up, interrupt routing is probably hosed
Mounting root from ufs:/dev/ad0s4a
---end dmesg---

-- 
Douglas S. Keester
dkeester at xxxxxxxxxxxxx