Xircom cardbus NIC not working

[Tim Darby]

It worked, thanks!

Tim

Sepherosa Ziehau wrote:

This is a dc(4) card.

Please try:
http://leaf.dragonflybsd.org/~sephe/if_dc_xircom.diff
Best Regards,
sephe
On 12/26/05, Tim Darby <t-df at xxxxxxxxxxxx> wrote:
 

Hi all and Merry Christmas!  I've been watching the DF lists for awhile
now and just want to thank Matt and everyone else for all the great work
on DragonFly.  I can't wait for upcoming new stuff, especially ZFS.
I've been running OpenBSD servers for some time but I'm a noob to DF so
bare with me.  I tried to boot 1.4 RC1 this morning and ran into a snag
with my Realport Cardbus 10/100 NIC.  I hope the attached dmesg helps.
Tim

Copyright (c) 2003, 2004, 2005 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
       The Regents of the University of California. All rights reserved.
DragonFly 1.4.0-RELEASE #2: Fri Dec 23 13:04:39 PST 2005
   root at xxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
TSC clock: 366645245 Hz, i8254 clock: 1193098 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (366.67-MHz 686-class CPU)
 Origin = "GenuineIntel"  Id = 0x66a  Stepping = 10
 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 201326592 (196608K bytes)
avail memory = 183836672 (179528K bytes)
pnpbios: Bad PnP BIOS data checksum
Preloaded elf kernel "/kernel" at 0xc06b6000.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00fdf60
npx0: <math processor> on motherboard
npx0: INT 16 interface
legacypci0 on motherboard
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c42 graphics accelerator> at 0.0 irq 11
pci0: <unknown card> (vendor=0x1287, dev=0x0020) at 3.0 irq 11
cbb0: <TI1220 PCI-CardBus Bridge> at device 4.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci_cfgintr: 0:4 INTA routed to irq 11
cbb1: <TI1220 PCI-CardBus Bridge> at device 4.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci_cfgintr: 0:4 INTB routed to irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcd0-0xfcdf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfce0-0xfcff irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <Intel 82371AB Power management controller> at 7.3
pci0: <unknown card> (vendor=0x125d, dev=0x1968) at 8.0 irq 5
orm0: <Option ROM> at iomem 0xc0000-0xcefff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata1-slave: ATAPI identify retries exceeded
Product version: 5.0
Product name: IBM | 10/100 EtherJet CardBus | IBMC-10/100 | 1.04 |
Manufacturer ID: a400130181
Functions: Network Adaptor, Multi-Functioned
Function Extension: 040600062925a3c5
Function Extension: 0102
Function Extension: 0280969800
Function Extension: 0200e1f505
Function Extension: 0301
Function Extension: 0303
Function Extension: 0501
cardbus0: Invalid BAR number: 27(06)
CIS reading done
cardbus0: <unknown card> (vendor=0x115d, dev=0x0003) at 0.0 irq 11
cbb0: CardBus card activation failed
ad0: 17301MB <IBM-DJSA-220> [35152/16/63] at ata0-master UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2102> at ata1-master PIO4
Mounting root from cd9660:cd0c
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TOSHIBA DVD-ROM SD-C2102 1029> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: cd present [114288 x 2048 byte records]


   



--
Live Free or Die