Linksys WPC54G and 1.2.x
hamilton at pobox.com
Fri Aug 26 19:05:06 PDT 2005
I've been flailing trying to get my wireless network card working and am looking for advice.
I have a HP Pavillion ze4500 laptop, Linksys WPC54G network card, and DFly 1.2.5. I've tried
every combination of *inf *INF *sys files from the driver using ndis, with mixed success.
I do have the card working under Linux and ndis on the same hardware. The driver does
have a .bin file included, but I don't think it's part of the problem here - it works under
linux without having to load any firmware onto the card.
Here's what I get when I try to kldload if_ndis:
Product version: 8.0
Product name: Broadcom | 802.11b CardBus | 8.0 |
Manufacturer ID: d0020604
Function Extension: 0406000c41c45747
Functions: Network Adaptor, Multi-Functioned
Function Extension: 0107
Function Extension: 0240420f00
Function Extension: 0280841e00
Function Extension: 0260ec5300
Function Extension: 02c0d8a700
Function Extension: 0307
Function Extension: 0501
CIS reading done
ndis0.cardbus0[CardBus bus].cbb0[O2Micro OZ6912/6972 PCI-CardBus Bridge].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
ndis0: [tentative] mem 0x88001000-0x88001fff irq 11 at device 0.0 on cardbus0
can't re-use a leaf (FrameBursting)!
can't re-use a leaf (EnableAutoConnect)!
no match for srand
ndis0: NDIS API version: 5.1
ndis0: init handler failed
device_probe_and_attach: ndis0 attach returned 6
I edited the generated .h file and deleted the duplicate entries, then rebuilt; that got rid
of the "can't re-use a leaf" messages but I'm lost at the "no match for srand" problem.
(I get the same device_probe_and_attach message with the leaf duplicates cleaned up.) Does
anyone have this card working under DragonFly?
I looked around a little and can find an ATH-supported card for under $100, and would be
open to going that route and using the ported (but not yet in tree) ath driver, but would
prefer to save the $$$ if anyone has other ideas which might make this work. Other advice
for configurations known to work with DragonFly and 802.11g would be welcome as well.
hamilton at xxxxxxxxx
More information about the Users