Hardware Detection Question

Bill Hacker wbh at conducive.org
Mon Apr 11 13:29:23 PDT 2005 

Matthew Dillon wrote:

    Maybe Intel bumped the PCI chip rev.  Do a pciconf -l

						-Matt
agp0 at pci0:0:0:  class=0x060000 card=0x00000000 chip=0x31121106 rev=0x00 
hdr=0x00
pcib1 at pci0:1:0: class=0x060400 card=0x00000080 chip=0xb1121106 rev=0x00 
hdr=0x01
isab0 at pci0:7:0: class=0x060100 card=0x00001106 chip=0x06861106 rev=0x40 
hdr=0x00
atapci0 at pci0:7:1:       class=0x01018a card=0x05711106 chip=0x05711106 
rev=0x06 hdr=0x00
uhci0 at pci0:7:2: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x1a 
hdr=0x00
uhci1 at pci0:7:3: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x1a 
hdr=0x00
none0 at pci0:7:4: class=0x068000 card=0x30571106 chip=0x30571106 rev=0x40 
hdr=0x00
sis0 at pci0:8:0:  class=0x020000 card=0x09001039 chip=0x09001039 rev=0x02 
hdr=0x00
atapci1 at pci0:9:0:       class=0x010400 card=0x61141095 chip=0x31141095 
rev=0x02 hdr=0x00
none1 at pci0:10:0:        class=0x020000 card=0x13768086 chip=0x107c8086 
rev=0x05 hdr=0x00
dc0 at pci0:15:0:  class=0x020000 card=0x12161113 chip=0x09851317 rev=0x11 
hdr=0x00
none2 at pci1:0:0: class=0x030000 card=0x85001023 chip=0x85001023 rev=0x00 
hdr=0x00

dmesg.boot attached

TIA,

Bill

Copyright (c) 2003, 2004, 2005 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.2.0-RELEASE #0: Fri Apr  8 01:25:26 PDT 2005
    root at xxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
TSC clock: 1666272687 Hz, i8254 clock: 1193238 Hz
CPU: Unknow CPU Type (1666.20-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x680  Stepping = 0
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 1065353216 (1040384K bytes)
avail memory = 1024835584 (1000816K bytes)
Preloaded elf kernel "/kernel" at 0xc061d000.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00fd630
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using MMX optimized bcopy/copyin/copyout
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=1106 device=b112)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Trident model 8500 VGA-compatible display device> at 0.0 irq 5
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xc000-0xc00f at device 7.1 on pci0
atapci0: Correcting VIA config for southbridge data corruption bug
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 12 at device 7.2 on pci0
installed MI handler for int 12
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 12 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4
sis0: <SiS 900 10/100BaseTX> port 0xcc00-0xccff mem 0xd8040000-0xd8040fff irq 5 at device 8.0 on pci0
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: MAC address: 00:06:4f:05:25:b1
installed MI handler for int 5
atapci1: <SiI 3114 SATA controller> port 0xe000-0xe00f,0xdc00-0xdc03,0xd800-0xd807,0xd400-0xd403,0xd000-0xd007 mem 0xd8041000-0xd80413ff irq 11 at device 9.0 on pci0
ata2: at 0xd000 on atapci1
installed MI handler for int 11
ata3: at 0xd800 on atapci1
pci0: <unknown card> (vendor=0x8086, dev=0x107c) at 10.0 irq 10
dc0: <ADMtek AN985 10/100BaseTX> port 0xe800-0xe8ff mem 0xd8042000-0xd80423ff irq 12 at device 15.0 on pci0
miibus1: <MII bus> on dc0
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: MAC address: 00:10:dc:c8:0b:d1
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd47ff,0xd5000-0xd5fff,0xd6000-0xe5fff on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1: can't drain, serial port might not exist, disabling
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
installed MI handler for int 7
installed MI handler for int 0
ad5: DMA limited to UDMA33, non-ATA66 cable or device
ad7: DMA limited to UDMA33, non-ATA66 cable or device
ar0: 76319MB <ATA RAID1 array> [9729/255/63] status: READY subdisks:
 0 READY ad0: 76319MB <WDC WD800JB-00JJA0> [155061/16/63] at ata0-master UDMA100
          1 READY ad2: 76319MB <WDC WD800JB-00JJA0> [155061/16/63] at ata1-master UDMA100
         ar1: 194480MB <ATA RAID1 array> [24792/255/63] status: READY subdisks:
 0 READY ad5: 194481MB <Maxtor 6B200M0> [395136/16/63] at ata2-slave UDMA33
          1 READY ad7: 194481MB <Maxtor 6B200M0> [395136/16/63] at ata3-slave UDMA33
         acd0: DVD-ROM <DVD-ROM DDU1621> at ata0-slave PIO4
Mounting root from ufs:/dev/ar0s1a
cd0 at ata0 bus 0 target 1 lun 0
cd0: <SONY DVD-ROM DDU1621 S1.6> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present

More information about the Users mailing list