Installation - No Suitable Disk Found

[km b]

Hi All!

I am trying to install dragonfly on the HD but I consistently get the
following error: no suitable disk (IDE / SCSI) found on the system.
Consequently I booted the DragonFly in verbose mode and notice the following!

atapci0: <Intel ICH7 ATA controller> [tentative] port
0x1810-0x181f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1810
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 14 eb
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=00 stat1=00
ata0: devices=04
ata0.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata0 [tentative]: at 0x1f0 irq 14 on atapci0
ata0 [attached!]: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1818
ata1.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata1 [tentative]: at 0x170 irq 15 on atapci0
ata1 [attached!]: at 0x170 irq 15 on atapci0
atapci0: <Intel ICH7 ATA controller> [attached!] port
0x1810-0x181f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x27c5) at 31.2 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x27da) at 31.3 irq 11
Device 31, function 1 is a SATA controller - notice no memory mapped addresses.

Also I am attaching the detailed dmesg and pciconf -lv output herein.

Does NATA solve this problem?

Cheers
kmb
--
Something is wrong up on cloud # 9!