Intel Core Duo vs. DragonFly 1.5.1 (possible SATA related)
Gabor MICSKO
gmicsko at szintezis.hu
Mon Mar 27 02:47:57 PST 2006
Hi!
I grabbed dmesg, verbose dmesg (boot -v), and "pciconf -lv" output. I
hope helps.
pciconf -lv:
------------
hostb0 at pci0:0:0: class=0x060000 card=0x54051558 chip=0x27a08086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
none0 at pci0:2:0: class=0x030000 card=0x54051558 chip=0x27a28086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
class = display
subclass = VGA
none1 at pci0:2:1: class=0x038000 card=0x54051558 chip=0x27a68086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
class = display
none2 at pci0:27:0: class=0x040300 card=0x54051558 chip=0x27d88086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) High Definition Audio'
class = multimedia
pcib1 at pci0:28:0: class=0x060400 card=0x00000040 chip=0x27d08086 rev=0x02
hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCI Express Root Port'
class = bridge
subclass = PCI-PCI
pcib2 at pci0:28:1: class=0x060400 card=0x00000040 chip=0x27d28086 rev=0x02
hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCI Express Root Port'
class = bridge
subclass = PCI-PCI
uhci0 at pci0:29:0: class=0x0c0300 card=0x54051558 chip=0x27c88086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci1 at pci0:29:1: class=0x0c0300 card=0x54051558 chip=0x27c98086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci2 at pci0:29:2: class=0x0c0300 card=0x54051558 chip=0x27ca8086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci3 at pci0:29:3: class=0x0c0300 card=0x54051558 chip=0x27cb8086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
none3 at pci0:29:7: class=0x0c0320 card=0x54051558 chip=0x27cc8086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
class = serial bus
subclass = USB
pcib3 at pci0:30:0: class=0x060401 card=0x00000050 chip=0x24488086 rev=0xe2
hdr=0x01
vendor = 'Intel Corporation'
device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI
Bridge'
class = bridge
subclass = PCI-PCI
isab0 at pci0:31:0: class=0x060100 card=0x54051558 chip=0x27b98086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801GBM (ICH7-M) LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:31:1: class=0x01018a card=0x54051558 chip=0x27df8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) Ultra ATA Storage Controller'
class = mass storage
subclass = ATA
atapci1 at pci0:31:2: class=0x01018f card=0x54051558 chip=0x27c48086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GBM/GHM (ICH7-M Family) Serial ATA Storage
Controller'
class = mass storage
subclass = ATA
none4 at pci0:31:3: class=0x0c0500 card=0x54051558 chip=0x27da8086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) SMBus Controller'
class = serial bus
subclass = SMBus
none5 at pci4:7:0: class=0x060700 card=0x54051558 chip=0x8039104c rev=0x00
hdr=0x02
vendor = 'Texas Instruments (TI)'
class = bridge
subclass = PCI-CardBus
none6 at pci4:7:1: class=0x0c0010 card=0x8023104c chip=0x803a104c rev=0x00
hdr=0x00
vendor = 'Texas Instruments (TI)'
class = serial bus
subclass = FireWire
none7 at pci4:7:2: class=0x018000 card=0x54051558 chip=0x803b104c rev=0x00
hdr=0x00
vendor = 'Texas Instruments (TI)'
class = mass storage
none8 at pci4:7:3: class=0x080501 card=0x54051558 chip=0x803c104c rev=0x00
hdr=0x00
vendor = 'Texas Instruments (TI)'
class = base peripheral
none9 at pci4:11:0: class=0x020000 card=0x54051558 chip=0x816910ec rev=0x10
hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8169 Gigabit Ethernet Adapter'
class = network
subclass = ethernet
dmesg:
------
Copyright (c) 2003, 2004, 2005, 2006 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 1.5.1-DEVELOPMENT #0: Thu Mar 23 05:18:04 CET 2006
root at xxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
TSC clock: 2161327168 Hz, i8254 clock: 1193224 Hz
CPU: Genuine Intel(R) CPU T2600 @ 2.16GHz (2161.27-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8
Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 526909440 (514560K bytes)
avail memory = 499458048 (487752K bytes)
Preloaded elf kernel "/kernel" at 0xc0715000.
Preloaded elf module "/modules/acpi.ko" at 0xc07153ac.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 23 entries at 0xc00fde50
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <PTLTD Capell00> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (154.8C)
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x66,0x62 on acpi0
legacypci0 on motherboard
pcib0: <Host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
pci0: <Intel model 27a2 VGA-compatible display device> at 2.0 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x27a6) at 2.1
pci0: <unknown card> (vendor=0x8086, dev=0x27d8) at 27.0 irq 7
pcib1: <PCI to PCI bridge (vendor=8086 device=27d0)> irq 4 at device
28.0 on pci0
pci2: <PCI bus> on pcib1
pcib2: <PCI to PCI bridge (vendor=8086 device=27d2)> irq 11 at device
28.1 on pci0
pci3: <PCI bus> on pcib2
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 5 at
device 29.0 on pci0
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: Sony USB Floppy Drive, rev 1.10/6.01, addr 2
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 10 at
device 29.1 on pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
umass1: USB Solid state disk, rev 1.10/1.00, addr 2
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 3 at
device 29.2 on pci0
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 11 at
device 29.3 on pci0
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ugen0: Acer Labs USB2.0 Camera, rev 2.00/1.00, addr 2
pci0: <USB controller> at 29.7 irq 5
pcib3: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on
pci0
pci4: <PCI bus> on pcib3
cbb0: <PCI-CardBus Bridge> at device 7.0 on pci4
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib3: routed slot 7 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> mem
0xd0000000-0xd0003fff,0xd0005000-0xd00057ff at device 7.1 on pci4
fwohci0: Invalid irq 255
fwohci0: Please switch PNP-OS to 'No' in BIOS
pcib3: routed slot 7 INTA to irq 255
fwohci0: Could not allocate irq
device_probe_and_attach: fwohci0 attach returned 6
pci4: <unknown card> (vendor=0x104c, dev=0x803b) at 7.2
pci4: <unknown card> (vendor=0x104c, dev=0x803c) at 7.3
pci4: <unknown card> (vendor=0x10ec, dev=0x8169) at 11.0 irq 4
isab0: <PCI to ISA bridge (vendor=8086 device=27b9)> at device 31.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port
0x1810-0x181f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
atapci1: <Generic PCI ATA controller> port
0x18b0-0x18bf,0x18c0-0x18c3,0x18c8-0x18cf,0x18c4-0x18c7,0x18d0-0x18d7
mem 0xd0444400-0xd04447ff irq 10 at device 31.2 on pci0
ata2: at 0x18d0 on atapci1
ata3: at 0x18c8 on atapci1
pci0: <unknown card> (vendor=0x8086, dev=0x27da) at 31.3 irq 10
orm0: <Option ROMs> at iomem
0xce800-0xcf7ff,0xdc000-0xdffff,0xe0000-0xe17ff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
ata0-slave: ATAPI identify retries exceeded
intr 10 at 50001 > 50000 hz, livelocked limit engaged!
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
cpu0: Performance states changed
cpu0: Cx states changed
ad4: DMA limited to UDMA33, non-ATA66 cable or device
ad4: 76319MB <HTS541080G9SA00> [155061/16/63] at ata2-master BIOSDMA
acd0: DVD-R <PHILIPS DVD+/-RW SDVD8441> at ata0-master PIO4
Mounting root from cd9660:cd0c
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PHILIPS DVD+-RW SDVD8441 PV32> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: cd present [110384 x 2048 byte records]
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <TwinMOS MOBILE DISK 1.11> Removable Direct Access SCSI-2 device
da1: 1.000MB/s transfers
da1: 31MB (64512 512 byte sectors: 64H 32S/T 31C)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SONY USB-FDU 6.01> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
intr 10 at 7384 < 20000 hz, livelock removed
acpi_tz0: _CRT value is absurd, ignored (154.8C)
cpu0: Performance states changed
cpu0: Cx states changed
cpu0: Performance states changed
cpu0: Cx states changed
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
da0s1: slice starts beyond end of the disk: rejecting it
da0s2: slice starts beyond end of the disk: rejecting it
da0s3: slice starts beyond end of the disk: rejecting it
da0s4: slice starts beyond end of the disk: rejecting it
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi
status == 0x0
da0s1: slice starts beyond end of the disk: rejecting it
da0s2: slice starts beyond end of the disk: rejecting it
da0s3: slice starts beyond end of the disk: rejecting it
da0s4: slice starts beyond end of the disk: rejecting it
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi
status == 0x0
umass1: at uhub1 port 2 (addr 2) disconnected
pass: cdevsw removed
(da1:umass-sim1:1:0:0): lost device
(da1:umass-sim1:1:0:0): removing device entry
da: cdevsw removed
umass1: detached
umass1: USB Solid state disk, rev 1.10/1.00, addr 2
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <TwinMOS MOBILE DISK 1.11> Removable Direct Access SCSI-2 device
da1: 1.000MB/s transfers
da1: 31MB (64512 512 byte sectors: 64H 32S/T 31C)
verbose dmesg:
--------------
Copyright (c) 2003, 2004, 2005, 2006 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 1.5.1-DEVELOPMENT #0: Thu Mar 23 05:18:04 CET 2006
root at xxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
Calibrating clock(s) ... TSC clock: 2161321812 Hz, i8254 clock: 1193222
Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Genuine Intel(R) CPU T2600 @ 2.16GHz (2161.27-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8
Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 526909440 (514560K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00742000 - 0x1f66ffff, 519233536 bytes (126766 pages)
avail memory = 499458048 (487752K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f6230
bios32: Entry = 0xfd580 (c00fd580) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x273
pnpbios: Found PnP BIOS data at 0xc00f62a0
pnpbios: Entry = f0000:b305 Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "/kernel" at 0xc0715000.
Preloaded elf module "/modules/acpi.ko" at 0xc07153ac.
Leaving critical section, allowing interrupts
wlan: <802.11 Link Layer>
crypto: <crypto core>
Pentium Pro MTRR support enabled
md0: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80001014
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27a08086)
pcibios: BIOS version 2.10
Using $PIR table, 23 entries at 0xc00fde50
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 7 A 0x60 3 4 5 6 7 10 11 12
embedded 0 1 A 0x60 3 4 5 6 7 10 11 12
slot 6 1 0 A 0x60 3 4 5 6 7 10 11 12
slot 6 1 0 B 0x61 3 4 5 6 7 10 11 12
slot 6 1 0 C 0x62 3 4 5 6 7 10 11 12
slot 6 1 0 D 0x63 3 4 5 6 7 10 11 12
embedded 0 2 A 0x60 3 4 5 6 7 10 11 12
embedded 0 27 A 0x6a 3 4 5 6 7 10 11 12
embedded 0 28 A 0x61 3 4 5 6 7 10 11 12
embedded 0 28 B 0x60 3 4 5 6 7 10 11 12
embedded 0 28 C 0x62 3 4 5 6 7 10 11 12
embedded 0 28 D 0x63 3 4 5 6 7 10 11 12
slot 7 2 0 A 0x60 3 4 5 6 7 10 11 12
slot 7 2 0 B 0x61 3 4 5 6 7 10 11 12
slot 7 2 0 C 0x62 3 4 5 6 7 10 11 12
slot 7 2 0 D 0x63 3 4 5 6 7 10 11 12
slot 8 3 0 A 0x61 3 4 5 6 7 10 11 12
slot 8 3 0 B 0x62 3 4 5 6 7 10 11 12
slot 8 3 0 C 0x63 3 4 5 6 7 10 11 12
slot 8 3 0 D 0x60 3 4 5 6 7 10 11 12
slot 9 255 0 A 0x62 3 4 5 6 7 10 11 12
slot 9 255 0 B 0x63 3 4 5 6 7 10 11 12
slot 9 255 0 C 0x60 3 4 5 6 7 10 11 12
slot 9 255 0 D 0x61 3 4 5 6 7 10 11 12
slot 10 255 0 A 0x63 3 4 5 6 7 10 11 12
slot 10 255 0 B 0x60 3 4 5 6 7 10 11 12
slot 10 255 0 C 0x61 3 4 5 6 7 10 11 12
slot 10 255 0 D 0x62 3 4 5 6 7 10 11 12
slot 11 255 0 A 0x60 3 4 5 6 7 10 11 12
slot 11 255 0 B 0x61 3 4 5 6 7 10 11 12
slot 11 255 0 C 0x62 3 4 5 6 7 10 11 12
slot 11 255 0 D 0x63 3 4 5 6 7 10 11 12
slot 12 255 0 A 0x61 3 4 5 6 7 10 11 12
slot 12 255 0 B 0x62 3 4 5 6 7 10 11 12
slot 12 255 0 C 0x63 3 4 5 6 7 10 11 12
slot 12 255 0 D 0x60 3 4 5 6 7 10 11 12
embedded 0 29 A 0x6b 3 4 5 6 7 10 11 12
embedded 0 29 B 0x63 3 4 5 6 7 10 11 12
embedded 0 29 C 0x62 3 4 5 6 7 10 11 12
embedded 0 29 D 0x60 3 4 5 6 7 10 11 12
embedded 0 30 A 0x6a 3 4 5 6 7 10 11 12
embedded 0 30 B 0x68 3 4 5 6 7 10 11 12
slot 1 4 0 A 0x69 3 4 5 6 7 10 11 12
slot 1 4 0 B 0x6a 3 4 5 6 7 10 11 12
slot 1 4 0 C 0x6b 3 4 5 6 7 10 11 12
slot 1 4 0 D 0x68 3 4 5 6 7 10 11 12
slot 2 4 1 A 0x6a 3 4 5 6 7 10 11 12
slot 2 4 1 B 0x69 3 4 5 6 7 10 11 12
slot 2 4 1 C 0x68 3 4 5 6 7 10 11 12
slot 2 4 1 D 0x6b 3 4 5 6 7 10 11 12
slot 3 4 2 A 0x62 3 4 5 6 7 10 11 12
slot 3 4 2 B 0x63 3 4 5 6 7 10 11 12
slot 3 4 2 C 0x61 3 4 5 6 7 10 11 12
slot 3 4 2 D 0x60 3 4 5 6 7 10 11 12
slot 4 4 3 A 0x63 3 4 5 6 7 10 11 12
slot 4 4 3 B 0x62 3 4 5 6 7 10 11 12
slot 4 4 3 C 0x69 3 4 5 6 7 10 11 12
slot 4 4 3 D 0x6a 3 4 5 6 7 10 11 12
slot 5 4 5 A 0x61 3 4 5 6 7 10 11 12
slot 5 4 5 B 0x68 3 4 5 6 7 10 11 12
slot 5 4 5 C 0x6a 3 4 5 6 7 10 11 12
slot 5 4 5 D 0x69 3 4 5 6 7 10 11 12
embedded 4 8 A 0x68 3 4 5 6 7 10 11 12
embedded 4 11 A 0x61 3 4 6 7 10
embedded 0 31 A 0x62 3 4 5 6 7 10 11 12
embedded 0 31 B 0x63 3 4 5 6 7 10 11 12
embedded 0 31 D 0x60 3 4 5 6 7 10 11 12
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
npx0: <math processor> [attached!] on motherboard
acpi0.nexus0.root0
acpi0: <PTLTD Capell00> [tentative] on motherboard
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
ACPI timer looks GOOD min = 5, max = 7, width = 2
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_timer0.acpi0.nexus0.root0
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port
0x1008-0x100b on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port
0x1008-0x100b on acpi0
cpu0.acpi0.nexus0.root0
cpu0: <ACPI CPU (3 Cx states)> [tentative] on acpi0
cpu0: <ACPI CPU (3 Cx states)> [attached!] port
0x1015,0x1014,0x1010-0x1013 on acpi0
acpi_tz0.acpi0.nexus0.root0
acpi_tz0: <Thermal Zone> [tentative] on acpi0
acpi_tz0: _CRT value is absurd, ignored (154.8C)
acpi_tz0: <Thermal Zone> [attached!] on acpi0
acpi_cmbat0.acpi0.nexus0.root0
acpi_cmbat0: <Control Method Battery> [tentative] on acpi0
acpi_cmbat0: <Control Method Battery> [attached!] on acpi0
acpi_button0.acpi0.nexus0.root0
acpi_button0: <Power Button> [tentative] on acpi0
acpi_button0: <Power Button> [attached!] on acpi0
acpi_button1.acpi0.nexus0.root0
acpi_button1: <Sleep Button> [tentative] on acpi0
acpi_button1: <Sleep Button> [attached!] on acpi0
acpi_acad0.acpi0.nexus0.root0
acpi_acad0: <AC Adapter> [tentative] on acpi0
acpi_acad0: <AC Adapter> [attached!] on acpi0
acpi_lid0.acpi0.nexus0.root0
acpi_lid0: <Control Method Lid Switch> [tentative] on acpi0
acpi_lid0: <Control Method Lid Switch> [attached!] on acpi0
unknown: not probed (disabled)
acpi_ec0.acpi0.nexus0.root0
acpi_ec0: <Embedded Controller: GPE 0x17> [tentative] port 0x66,0x62 on
acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> [attached!] port 0x66,0x62 on
acpi0
unknown: not probed (disabled)
acpi0: <PTLTD Capell00> [attached!] at irq 9 on motherboard
legacypci0.nexus0.root0
legacypci0 [tentative] on motherboard
pcib0.legacypci0.nexus0.root0
pcib0: <Host to PCI bridge> [tentative] on legacypci0
pci0.pcib0.legacypci0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: pci_attach() physical bus=0
found-> vendor=0x8086, dev=0x27a0, revid=0x03
bus=0, slot=0, func=0
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base d0100000, size 19
map[14]: type 1, range 32, base 00001800, size 3
map[18]: type 1, range 32, base c0000000, size 28
map[1c]: type 1, range 32, base d0200000, size 18
found-> vendor=0x8086, dev=0x27a2, revid=0x03
bus=0, slot=2, func=0
class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base d0180000, size 19
found-> vendor=0x8086, dev=0x27a6, revid=0x03
bus=0, slot=2, func=1
class=[DISPLAY]03-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 64, base d0440000, size 14
found-> vendor=0x8086, dev=0x27d8, revid=0x02
bus=0, slot=27, func=0
class=[MULTIMEDIA]04-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=7
found-> vendor=0x8086, dev=0x27d0, revid=0x02
bus=0, slot=28, func=0
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=2 secondarybus=2
intpin=a, irq=4
found-> vendor=0x8086, dev=0x27d2, revid=0x02
bus=0, slot=28, func=1
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=3 secondarybus=3
intpin=b, irq=11
map[20]: type 1, range 32, base 00001820, size 5
found-> vendor=0x8086, dev=0x27c8, revid=0x02
bus=0, slot=29, func=0
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[20]: type 1, range 32, base 00001840, size 5
found-> vendor=0x8086, dev=0x27c9, revid=0x02
bus=0, slot=29, func=1
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=10
map[20]: type 1, range 32, base 00001860, size 5
found-> vendor=0x8086, dev=0x27ca, revid=0x02
bus=0, slot=29, func=2
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=c, irq=3
map[20]: type 1, range 32, base 00001880, size 5
found-> vendor=0x8086, dev=0x27cb, revid=0x02
bus=0, slot=29, func=3
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=11
map[10]: type 1, range 32, base d0444000, size 10
found-> vendor=0x8086, dev=0x27cc, revid=0x02
bus=0, slot=29, func=7
class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
found-> vendor=0x8086, dev=0x2448, revid=0xe2
bus=0, slot=30, func=0
class=[BRIDGE]06-04-01, hdrtype=0x01, mfdev=0
subordinatebus=4 secondarybus=4
found-> vendor=0x8086, dev=0x27b9, revid=0x02
bus=0, slot=31, func=0
class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 00000000, size 3
map[14]: type 1, range 32, base 00000000, size 2
map[18]: type 1, range 32, base 00000000, size 3
map[1c]: type 1, range 32, base 00000000, size 2
map[20]: type 1, range 32, base 00001810, size 4
found-> vendor=0x8086, dev=0x27df, revid=0x02
bus=0, slot=31, func=1
class=[STORAGE]01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=255
map[10]: type 1, range 32, base 000018d0, size 3
map[14]: type 1, range 32, base 000018c4, size 2
map[18]: type 3, range 32, base 000018c8, size 3
map[1c]: type 1, range 32, base 000018c0, size 2
map[20]: type 1, range 32, base 000018b0, size 4
map[24]: type 1, range 32, base d0444400, size 10
found-> vendor=0x8086, dev=0x27c4, revid=0x02
bus=0, slot=31, func=2
class=[STORAGE]01-01-8f, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=10
map[20]: type 1, range 32, base 000018e0, size 5
found-> vendor=0x8086, dev=0x27da, revid=0x02
bus=0, slot=31, func=3
class=[SERIALBUS]0c-05-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=10
pci0: <Intel model 27a2 VGA-compatible display device> (vendor=0x8086,
dev=0x27a2) at 2.0 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x27a6) at 2.1
pci0: <unknown card> (vendor=0x8086, dev=0x27d8) at 27.0 irq 7
pcib1.pci0.pcib0.legacypci0.nexus0.root0
pcib1: <PCI to PCI bridge (vendor=8086 device=27d0)> [tentative] irq 4
at device 28.0 on pci0
pcib1: secondary bus 2
pcib1: subordinate bus 2
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfff00000-0xfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci2.pcib1.pci0.pcib0.legacypci0.nexus0.root0
pci2: <PCI bus> [tentative] on pcib1
pci2: pci_attach() physical bus=2
pci2: <PCI bus> [attached!] on pcib1
pcib1: <PCI to PCI bridge (vendor=8086 device=27d0)> [attached!] irq 4
at device 28.0 on pci0
pcib2.pci0.pcib0.legacypci0.nexus0.root0
pcib2: <PCI to PCI bridge (vendor=8086 device=27d2)> [tentative] irq 11
at device 28.1 on pci0
pcib2: secondary bus 3
pcib2: subordinate bus 3
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xfff00000-0xfffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci3.pcib2.pci0.pcib0.legacypci0.nexus0.root0
pci3: <PCI bus> [tentative] on pcib2
pci3: pci_attach() physical bus=3
pci3: <PCI bus> [attached!] on pcib2
pcib2: <PCI to PCI bridge (vendor=8086 device=27d2)> [attached!] irq 11
at device 28.1 on pci0
uhci0.pci0.pcib0.legacypci0.nexus0.root0
uhci0: <UHCI (generic) USB controller> [tentative] port 0x1820-0x183f
irq 5 at device 29.0 on pci0
usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
usb0: <UHCI (generic) USB controller> [tentative] on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
usb0: <UHCI (generic) USB controller> [attached!] on uhci0
uhci0: <UHCI (generic) USB controller> [attached!] port 0x1820-0x183f
irq 5 at device 29.0 on pci0
uhci1.pci0.pcib0.legacypci0.nexus0.root0
uhci1: <UHCI (generic) USB controller> [tentative] port 0x1840-0x185f
irq 10 at device 29.1 on pci0
usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
usb1: <UHCI (generic) USB controller> [tentative] on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
umass0: USB Solid state disk, rev 1.10/1.00, addr 2
umass0:0:0:-1: Attached to scbus0
usb1: <UHCI (generic) USB controller> [attached!] on uhci1
uhci1: <UHCI (generic) USB controller> [attached!] port 0x1840-0x185f
irq 10 at device 29.1 on pci0
uhci2.pci0.pcib0.legacypci0.nexus0.root0
uhci2: <UHCI (generic) USB controller> [tentative] port 0x1860-0x187f
irq 3 at device 29.2 on pci0
usb2.uhci2.pci0.pcib0.legacypci0.nexus0.root0
usb2: <UHCI (generic) USB controller> [tentative] on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
usb2: <UHCI (generic) USB controller> [attached!] on uhci2
uhci2: <UHCI (generic) USB controller> [attached!] port 0x1860-0x187f
irq 3 at device 29.2 on pci0
uhci3.pci0.pcib0.legacypci0.nexus0.root0
uhci3: <UHCI (generic) USB controller> [tentative] port 0x1880-0x189f
irq 11 at device 29.3 on pci0
usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0
usb3: <UHCI (generic) USB controller> [tentative] on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ugen0: Acer Labs USB2.0 Camera, rev 2.00/1.00, addr 2
usb3: <UHCI (generic) USB controller> [attached!] on uhci3
uhci3: <UHCI (generic) USB controller> [attached!] port 0x1880-0x189f
irq 11 at device 29.3 on pci0
pci0: <USB controller> (vendor=0x8086, dev=0x27cc) at 29.7 irq 5
pcib3.pci0.pcib0.legacypci0.nexus0.root0
pcib3: <PCI to PCI bridge (vendor=8086 device=2448)> [tentative] at
device 30.0 on pci0
pcib3: secondary bus 4
pcib3: subordinate bus 4
pcib3: I/O decode 0x0-0x0
pcib3: memory decode 0x0-0x0
pcib3: prefetched decode 0x0-0x0
pcib3: Subtractively decoded bridge.
pci4.pcib3.pci0.pcib0.legacypci0.nexus0.root0
pci4: <PCI bus> [tentative] on pcib3
pci4: pci_attach() physical bus=4
found-> vendor=0x104c, dev=0x8039, revid=0x00
bus=4, slot=7, func=0
class=[BRIDGE]06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=255
map[10]: type 1, range 32, base d0005000, size 11
map[14]: type 1, range 32, base d0000000, size 14
found-> vendor=0x104c, dev=0x803a, revid=0x00
bus=4, slot=7, func=1
class=[SERIALBUS]0c-00-10, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=255
map[10]: type 1, range 32, base d0004000, size 12
found-> vendor=0x104c, dev=0x803b, revid=0x00
bus=4, slot=7, func=2
class=[STORAGE]01-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=255
map[10]: type 1, range 32, base d0005800, size 8
found-> vendor=0x104c, dev=0x803c, revid=0x00
bus=4, slot=7, func=3
class=[BASEPERIPH]08-05-01, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=255
map[10]: type 1, range 32, base 00002000, size 8
map[14]: type 1, range 32, base d0005c00, size 8
found-> vendor=0x10ec, dev=0x8169, revid=0x10
bus=4, slot=11, func=0
class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=4
cbb0.pci4.pcib3.pci0.pcib0.legacypci0.nexus0.root0
cbb0: <PCI-CardBus Bridge> [tentative] at device 7.0 on pci4
pcib3: device cbb0 requested decoded memory range 0x88000000-0xffffffff
cardbus0.cbb0.pci4.pcib3.pci0.pcib0.legacypci0.nexus0.root0
cardbus0: <CardBus bus> [tentative] on cbb0
cardbus0: <CardBus bus> [attached!] on cbb0
pccard0.cbb0.pci4.pcib3.pci0.pcib0.legacypci0.nexus0.root0
pccard0: <16-bit PCCard bus> [tentative] on cbb0
pccard0: <16-bit PCCard bus> [attached!] on cbb0
pci_cfgintr: can't route an interrupt to 0:30 INTC oldirq=255
pcib3: routed slot 7 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
fwohci0: vendor=104c, dev=803a
fwohci0.pci4.pcib3.pci0.pcib0.legacypci0.nexus0.root0
fwohci0: <1394 Open Host Controller Interface> [tentative] mem
0xd0000000-0xd0003fff,0xd0005000-0xd00057ff at device 7.1 on pci4
fwohci0: Invalid irq 255
fwohci0: Please switch PNP-OS to 'No' in BIOS
fwohci0: latency timer 224 -> 224.
fwohci0: cache size 16 -> 16.
pcib3: device fwohci0 requested decoded memory range
0xd0005000-0xd00057ff
pci_cfgintr: can't route an interrupt to 0:30 INTC oldirq=255
pcib3: routed slot 7 INTA to irq 255
fwohci0: Could not allocate irq
device_probe_and_attach: fwohci0 attach returned 6
pci4: <unknown card> (vendor=0x104c, dev=0x803b) at 7.2
pci4: <unknown card> (vendor=0x104c, dev=0x803c) at 7.3
pci4: <unknown card> (vendor=0x10ec, dev=0x8169) at 11.0 irq 4
pci4: <PCI bus> [attached!] on pcib3
pcib3: <PCI to PCI bridge (vendor=8086 device=2448)> [attached!] at
device 30.0 on pci0
isab0.pci0.pcib0.legacypci0.nexus0.root0
isab0: <PCI to ISA bridge (vendor=8086 device=27b9)> [tentative] at
device 31.0 on pci0
isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <PCI to ISA bridge (vendor=8086 device=27b9)> [attached!] at
device 31.0 on pci0
atapci0.pci0.pcib0.legacypci0.nexus0.root0
atapci0: <Generic PCI ATA controller> [tentative] port
0x1810-0x181f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1810
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 14 eb
ata0-slave: ATAPI 14 eb
ata0: mask=03 stat0=00 stat1=00
ata0: devices=0c
ata0.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata0 [tentative]: at 0x1f0 irq 14 on atapci0
ata0 [attached!]: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1818
ata1.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata1 [tentative]: at 0x170 irq 15 on atapci0
ata1 [attached!]: at 0x170 irq 15 on atapci0
atapci0: <Generic PCI ATA controller> [attached!] port
0x1810-0x181f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
atapci1.pci0.pcib0.legacypci0.nexus0.root0
atapci1: <Generic PCI ATA controller> [tentative] port
0x18b0-0x18bf,0x18c0-0x18c3,0x18c8-0x18cf,0x18c4-0x18c7,0x18d0-0x18d7
mem 0xd0444400-0xd04447ff irq 10 at device 31.2 on pci0
ata-: ata2 exists, using next available unit number
ata2: iobase=0x18d0 altiobase=0x18c6 bmaddr=0x18b0
ata2: mask=03 ostat0=50 ostat2=00
ata2-master: ATAPI 00 00
ata2-slave: ATAPI 00 00
ata2: mask=03 stat0=50 stat1=00
ata2-master: ATA 01 a5
ata2: devices=01
ata2.atapci1.pci0.pcib0.legacypci0.nexus0.root0
ata2 [tentative]: at 0x18d0 on atapci1
ata2 [attached!]: at 0x18d0 on atapci1
ata3: iobase=0x18c8 altiobase=0x18c2 bmaddr=0x18b8
ata3: mask=03 ostat0=7f ostat2=7f
ata3-master: ATAPI ff ff
ata3-slave: ATAPI ff ff
ata3: mask=03 stat0=7f stat1=7f
ata3-master: ATA ff ff
ata3-slave: ATA ff ff
ata3: devices=00
ata3.atapci1.pci0.pcib0.legacypci0.nexus0.root0
ata3 [tentative]: at 0x18c8 on atapci1
ata3 [attached!]: at 0x18c8 on atapci1
atapci1: <Generic PCI ATA controller> [attached!] port
0x18b0-0x18bf,0x18c2,0x18c8-0x18cf,0x18c6,0x18d0-0x18d7 mem
0xd0444400-0xd04447ff irq 10 at device 31.2 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x27da) at 31.3 irq 10
pci0: <PCI bus> [attached!] on pcib0
pcib0: <Host to PCI bridge> [attached!] on legacypci0
legacypci0 [attached!] on motherboard
ex_isa_identify()
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
orm0: <Option ROMs> [tentative] at iomem
0xce800-0xcf7ff,0xdc000-0xdffff,0xe0000-0xe17ff on isa0
orm0: <Option ROMs> [attached!] at iomem
0xce800-0xcf7ff,0xdc000-0xdffff,0xe0000-0xe17ff on isa0
pmtimer0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
pmtimer0 [tentative] on isa0
pmtimer0 [attached!] on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 [tentative] failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on isa0
ata4 [tentative] failed to probe at port 0x1f0 irq 14 on isa0
ata5 [tentative] failed to probe at port 0x170 irq 15 on isa0
adv0 [tentative] failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 [tentative] failed to probe at port 0x134-0x137 on isa0
aic0 [tentative] failed to probe at port 0x140-0x15f on isa0
atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on
isa0
atkbd0.atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0
psm0: current command byte:0047
psm0.atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on
isa0
vga0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
sio0: can't drain, serial port might not exist, disabling
sio0 [tentative] failed to probe at port 0x3f8-0x3ff irq 4 flags 0x10 on
isa0
sio1: can't drain, serial port might not exist, disabling
sio1 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03ef0120 0..1007=1008 cylinders, 0..1=2 heads, 1..32=32 sectors
0 accounted for
Device configuration finished.
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
lo0: bpf attached
ppp0: bpf attached
sl0: bpf attached
faith0: bpf attached
ata0-slave: ATAPI identify retries exceeded
intr 10 at 50001 > 50000 hz, livelocked limit engaged!
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_cmbat0: battery initialization start
acpi_ec0: info: new max delay is 20 us
acpi_ec0: info: new max delay is 120 us
acpi_cmbat0: battery initialization done, tried 1 times
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
cpu0: Performance states changed
cpu0: Cx states changed
ad4: DMA limited to UDMA33, non-ATA66 cable or device
ar: FreeBSD check1 failed
ad4: <HTS541080G9SA00/MB4OC60D> ATA-7 disk at ata2-master
ad4: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, BIOSDMA
ad4: piomode=4 dmamode=2 udmamode=5 cblid=0
ata0-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata0-master: success setting PIO4 on generic chip
acd0: <PHILIPS DVD+/-RW SDVD8441/PV32> DVD-R drive at ata0 as master
acd0: read 4134KB/s (34515KB/s) write 1722KB/s (1722KB/s), 2048KB
buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Writes: CD-R, CD-RW, DVD-R, test write, burnproof
acd0: Audio: play, 32 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-RW 120mm data disc
(probe0:ata0:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe0:ata0:0:0:0): ILLEGAL REQUEST asc:24,0
(probe0:ata0:0:0:0): Invalid field in CDB
(probe0:ata0:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe0:ata0:0:0:0): ILLEGAL REQUEST asc:24,0
(probe0:ata0:0:0:0): Invalid field in CDB
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <TwinMOS MOBILE DISK 1.11> Removable Direct Access SCSI-2 device
pass0: Serial Number \^_
pass0: 1.000MB/s transfers
pass1 at ata0 bus 0 target 0 lun 0
pass1: <PHILIPS DVD+-RW SDVD8441 PV32> Removable CD-ROM SCSI-0 device
pass1: 16.000MB/s transfers
bootdev: a0000075 type=117 unit=0 slice=0 part=0 major=-1
Mounting root from cd9660:/dev/acd0a
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PHILIPS DVD+-RW SDVD8441 PV32> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: cd present [110384 x 2048 byte records]
iso_mountroot(): using session at block 0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <TwinMOS MOBILE DISK 1.11> Removable Direct Access SCSI-2 device
da0: Serial Number \^_
da0: 1.000MB/s transfers
da0: 31MB (64512 512 byte sectors: 64H 32S/T 31C)
start_init: trying /sbin/init
intr 10 at 7384 < 20000 hz, livelock removed
acpi_tz0: _CRT value is absurd, ignored (154.8C)
acpi_tz0: _CRT value is absurd, ignored (154.8C)
acpi_ec0: info: new max delay is 170 us
cpu0: Performance states changed
cpu0: Cx states changed
cpu0: Performance states changed
cpu0: Cx states changed
On Sat, 2006-03-25 at 11:11 -0800, Matthew Dillon wrote:
> Hmm. Very odd. The ad4 probe is using BIOSDMA. The ATA controller
> doesn't recognize the ATA device. Its probing 'Generic PCI ATA
> controller' at PCI devices 31.1 and 31.2.
>
> Could you boot the CD and do a 'pciconf -l'? It might simply be
> a matter of adding PCI IDs to recognize the controller.
>
> -Matt
--
Micskó Gábor
HP APS, AIS, ASE
Szintézis Rt.
H-9023 GyÅ‘r, Tihanyi Ã. u. 2.
Tel: +36 96 502 221
Fax: +36 96 318 658
E-mail: gmicsko at xxxxxxxxxxxx
Attachment:
signature.asc
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pgp00002.pgp
Type: application/octet-stream
Size: 189 bytes
Desc: "Description: This is a digitally signed message part"
URL: <http://lists.dragonflybsd.org/pipermail/kernel/attachments/20060327/863627f6/attachment-0020.obj>
More information about the Kernel
mailing list