Kernel panic/dump: ffs_valloc (dup alloc) + request for a leaf account

Steven Looman steven at krx.nl
Thu Jan 27 12:00:32 PST 2005


"Matthew Dillon" <dillon at xxxxxxxxxxxxxxxxxxxx> wrote in message 
news:200501271908.j0RJ8emO060132 at xxxxxxxxxxxxxxxxxxxxxxx
>
> :Hi,
> :
> :I finally had the change to generate a panic on my box and dump it. It 
> seems
> :the problem is in ffs_valloc. I saw several other "dup alloc" and 
> "invalid
> :pages" come by before, but they never caused a panic.
> :
> :The panic occures after doing "heavy" fileio. A checkout of the source 
> tree
> :(by doing a cvsup for the first time) caused this panic. I saw it several
> :times before, but never had the chance to investivate further.
> :
> :(Relevant) information about the box is running:
> :Abit BP6 (smp, 2x celeron 500)
> :128MB ram
> :
> :Running a stable kernel (stable-iso of yesterday, 26-1-2005), UP, NOT MP!
> :
> :I'd rather not rape my upstream by putting the core on my own webserver.
> :Eirik Nygaard suggested I asked for an account on leaf and put the core
> :there.
> :
> :Regards,
> :
> :Steven Looman
>
>    Send me private email with your public ssh key and desired username
>    and I'll create you a leaf account.

Will be on it's way soon.

>
>    The problem is unfortunately not ffs_valloc() itself, but something
>    that occurs before-hand.  ffs_valloc() then trips over the problem.
>
>    Please post your /var/run/dmesg.boot output too.

I've attached the output of a boot -v at the end of this message.

>
>    How reproducable is the problem?  How often do you get it and do you
>    get other panics as well?  The more precise the information the more
>    helpful it is :-)

On this box the problem was pretty easy to reproduce. It occured nearly 
every cvsup. It doesn't happen at the beginning, only it has been running 
for a while. Never saw it on another box.

As far a I know the box doesn't suffer from other panics. I always saw 
something with ffs_*. Always under the same conditions (running cvsup). 
Since the box is/can do SMP, I try to grab source as soon as possible and 
rebuild with SMP enabled, but won't get very far since the panics.

>
> -Matt
> Matthew Dillon
> <dillon at xxxxxxxxxxxxx>

I hope this will help get you far enough. If not, just ask/shout :)


[dmesg.boot, boot -v]
Copyright (c) 2003, 2004, 2005 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 The Regents of the University of California. All rights reserved.
DragonFly 1.1-Stable #0: Mon Jan 24 13:13:52 GMT 2005
    root at xxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
Calibrating clock(s) ... TSC clock: 501167202 Hz, i8254 clock: 1193255 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (501.14-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x665  Stepping = 5
  Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 134152192 (131008K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x0069b000 - 0x07fe7fff, 127193088 bytes (31053 pages)
avail memory = 121032704 (118196K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fb110
bios32: Entry = 0xfb590 (c00fb590)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xb5c0
pnpbios: Found PnP BIOS data at 0xc00fc1e0
pnpbios: Entry = f0000:c208  Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "/kernel" at 0xc066e000.
Preloaded elf module "/modules/acpi.ko" at 0xc066e244.
Leaving critical section, allowing interrupts
crypto: <crypto core>
wlan: <802.11 Link Layer>
Pentium Pro MTRR support enabled
md0: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fd7e0
PCI-Only Interrupts: 10 11 12
Location  Bus Device Pin  Link  IRQs
slot 1      0   15    A   0x60  3 4 5 7 9 10 11 12 14 15
slot 1      0   15    B   0x61  3 4 5 7 9 10 11 12 14 15
slot 1      0   15    C   0x62  3 4 5 7 9 10 11 12 14 15
slot 1      0   15    D   0x63  3 4 5 7 9 10 11 12 14 15
slot 2      0   13    A   0x61  3 4 5 7 9 10 11 12 14 15
slot 2      0   13    B   0x62  3 4 5 7 9 10 11 12 14 15
slot 2      0   13    C   0x63  3 4 5 7 9 10 11 12 14 15
slot 2      0   13    D   0x60  3 4 5 7 9 10 11 12 14 15
slot 3      0   19    A   0x62  3 4 5 7 9 10 11 12 14 15
slot 3      0   19    B   0x62  3 4 5 7 9 10 11 12 14 15
slot 3      0   19    C   0x60  3 4 5 7 9 10 11 12 14 15
slot 3      0   19    D   0x61  3 4 5 7 9 10 11 12 14 15
slot 4      0    9    A   0x63  3 4 5 7 9 10 11 12 14 15
slot 4      0    9    B   0x60  3 4 5 7 9 10 11 12 14 15
slot 4      0    9    C   0x61  3 4 5 7 9 10 11 12 14 15
slot 4      0    9    D   0x62  3 4 5 7 9 10 11 12 14 15
slot 5      0   17    A   0x63  3 4 5 7 9 10 11 12 14 15
slot 5      0   17    B   0x60  3 4 5 7 9 10 11 12 14 15
slot 5      0   17    C   0x61  3 4 5 7 9 10 11 12 14 15
slot 5      0   17    D   0x62  3 4 5 7 9 10 11 12 14 15
slot 6      0   11    A   0x62  3 4 5 7 9 10 11 12 14 15
slot 6      0   11    B   0x63  3 4 5 7 9 10 11 12 14 15
slot 6      0   11    C   0x60  3 4 5 7 9 10 11 12 14 15
slot 6      0   11    D   0x61  3 4 5 7 9 10 11 12 14 15
embedded    0    7    A   0x60  3 4 5 7 9 10 11 12 14 15
embedded    0    7    B   0x61  3 4 5 7 9 10 11 12 14 15
embedded    0    7    C   0x62  3 4 5 7 9 10 11 12 14 15
embedded    0    7    D   0x63  3 4 5 7 9 10 11 12 14 15
embedded    0    1    A   0x60  3 4 5 7 9 10 11 12 14 15
embedded    0    1    B   0x61  3 4 5 7 9 10 11 12 14 15
embedded    0    1    C   0x62  3 4 5 7 9 10 11 12 14 15
embedded    0    1    D   0x63  3 4 5 7 9 10 11 12 14 15
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ABIT AWRDACPI> on motherboard
installed MI handler for int 9
    ACPI-0438: *** Error: Looking up [\\_PR_.CPU0] in namespace, 
AE_NOT_FOUND
SearchNode 0xc0ca1b10 StartNode 0xc0ca1b10 ReturnNode 0
    ACPI-1299: *** Error: [NULL NAME], AE_NOT_FOUND
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
    ACPI-0438: *** Error: Looking up [\\_PR_.CPU0] in namespace, 
AE_NOT_FOUND
SearchNode 0xc0ca1b10 StartNode 0xc0ca1b10 ReturnNode 0
    ACPI-1299: *** Error: [NULL NAME], AE_NOT_FOUND
acpi_button0: <Power Button> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on 
motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
 map[10]: type 1, range 32, base d0000000, size 26
found-> vendor=0x8086, dev=0x7190, revid=0x03
 bus=0, slot=0, func=0
 class=06-00-00, hdrtype=0x00, mfdev=0
 subordinatebus=0  secondarybus=0
found-> vendor=0x8086, dev=0x7191, revid=0x03
 bus=0, slot=1, func=0
 class=06-04-00, hdrtype=0x01, mfdev=0
 subordinatebus=1  secondarybus=1
found-> vendor=0x8086, dev=0x7110, revid=0x02
 bus=0, slot=7, func=0
 class=06-01-00, hdrtype=0x00, mfdev=1
 subordinatebus=0  secondarybus=0
 map[20]: type 1, range 32, base 0000f000, size  4
found-> vendor=0x8086, dev=0x7111, revid=0x01
 bus=0, slot=7, func=1
 class=01-01-80, hdrtype=0x00, mfdev=0
 subordinatebus=0  secondarybus=0
 map[20]: type 1, range 32, base 0000d000, size  5
found-> vendor=0x8086, dev=0x7112, revid=0x01
 bus=0, slot=7, func=2
 class=0c-03-00, hdrtype=0x00, mfdev=0
 subordinatebus=0  secondarybus=0
 intpin=d, irq=10
 map[90]: type 1, range 32, base 00005000, size  4
found-> vendor=0x8086, dev=0x7113, revid=0x02
 bus=0, slot=7, func=3
 class=06-80-00, hdrtype=0x00, mfdev=0
 subordinatebus=0  secondarybus=0
 map[10]: type 1, range 32, base d9100000, size 12
 map[14]: type 1, range 32, base 0000d400, size  6
 map[18]: type 1, range 32, base d9000000, size 20
found-> vendor=0x8086, dev=0x1229, revid=0x08
 bus=0, slot=9, func=0
 class=02-00-00, hdrtype=0x00, mfdev=0
 subordinatebus=0  secondarybus=0
 intpin=a, irq=10
 map[10]: type 1, range 32, base 0000d800, size  3
 map[14]: type 1, range 32, base 0000dc00, size  2
 map[20]: type 1, range 32, base 0000e000, size  8
found-> vendor=0x1103, dev=0x0004, revid=0x01
 bus=0, slot=19, func=0
 class=01-80-00, hdrtype=0x00, mfdev=1
 subordinatebus=0  secondarybus=0
 intpin=a, irq=11
 map[10]: type 1, range 32, base 0000e400, size  3
 map[14]: type 1, range 32, base 0000e800, size  2
 map[20]: type 1, range 32, base 0000ec00, size  8
found-> vendor=0x1103, dev=0x0004, revid=0x01
 bus=0, slot=19, func=1
 class=01-80-00, hdrtype=0x00, mfdev=1
 subordinatebus=0  secondarybus=0
 intpin=b, irq=11
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xd0000000-0xd3ffffff 
at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xd4000000-0xd5ffffff
pcib1:   prefetched decode 0xd6000000-0xd7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
 map[10]: type 1, range 32, base d4000000, size 24
 map[14]: type 1, range 32, base d6000000, size 25
found-> vendor=0x10de, dev=0x0028, revid=0x11
 bus=1, slot=0, func=0
 class=03-00-00, hdrtype=0x00, mfdev=0
 subordinatebus=0  secondarybus=0
 intpin=a, irq=12
pci1: <NVidia Riva TNT2 graphics accelerator> (vendor=0x10de, dev=0x0028) at 
0.0 irq 12
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on 
pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 ostat0=06 ostat2=06
ata0-master: ATAPI 04 04
ata0-slave: ATAPI 03 03
ata0: mask=03 stat0=04 stat1=03
ata0-master: ATA 0f 0f
ata0-slave: ATA 0f 0f
ata0: devices=00
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=03 ostat0=90 ostat2=50
ata1-master: ATAPI 8e 0e
ata1-slave: ATAPI 14 eb
ata1: mask=03 stat0=7f stat1=00
ata1-master: ATA 0f 0f
ata1: devices=08
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd000-0xd01f irq 10 
at device 7.2 on pci0
installed MI handler for int 10
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <Intel 82371AB Power management controller> (vendor=0x8086, 
dev=0x7113) at 7.3
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd400-0xd43f mem 
0xd9000000-0xd90fffff,0xd9100000-0xd9100fff irq 10 at device 9.0 on pci0
fxp0: using memory space register mapping
 using shared irq10.
fxp0: PCI IDs: 8086 1229 8086 000e 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
fxp0: MAC address: 00:90:27:a2:f1:63
atapci1: <HighPoint HPT366 ATA66 controller> port 
0xe000-0xe0ff,0xdc00-0xdc03,0xd800-0xd807 irq 11 at device 19.0 on pci0
ata2: iobase=0xd800 altiobase=0xdc02 bmaddr=0xe000
ata2: mask=03 ostat0=50 ostat2=00
ata2-master: ATAPI 00 00
ata2-slave: ATAPI 00 00
ata2: mask=03 stat0=50 stat1=00
ata2-master: ATA 01 a5
ata2: devices=01
ata2: at 0xd800 on atapci1
installed MI handler for int 11
atapci2: <HighPoint HPT366 ATA66 controller> port 
0xec00-0xecff,0xe800-0xe803,0xe400-0xe407 irq 11 at device 19.1 on pci0
ata-: ata2 exists, using next available unit number
ata3: iobase=0xe400 altiobase=0xe802 bmaddr=0xec00
ata3: mask=03 ostat0=20 ostat2=30
ata3-master: ATAPI 20 20
ata3-slave: ATAPI 30 30
ata3: mask=03 stat0=20 stat1=30
ata3-master: ATA 25 25
ata3-slave: ATA 25 25
ata3: devices=00
ata3: at 0xe400 on atapci2
 using shared irq11.
ex_isa_identify()
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 
0xc0000-0xc97ff,0xcc000-0xcd7ff,0xce000-0xcf7ff,0xef000-0xeffff on isa0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ata4 failed to probe at port 0x1f0 irq 14 on isa0
ata5 failed to probe at port 0x170 irq 15 on isa0
adv0 failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41a1 (0)
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x1, flags:0x3d0000
installed MI handler for int 1
psm0: current command byte:0067
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
installed MI handler for int 3
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
installed MI handler for int 7
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
installed MI handler for int 0
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
bpf: sl0 attached
bpf: faith0 attached
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68cc00, tty 63009a, net 67049a
ad4: success setting UDMA4 on HighPoint chip
ar: HighPoint check1 failed
ad4: <Maxtor 34098H4/YAH814Y0> ATA-6 disk at ata2-master
ad4: 39083MB (80043264 sectors), 79408 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA66
ad4: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-slave: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-slave: success setting PIO4 on generic chip
acd0: <SAMSUNG CD-R/RW SW-248F/R601> CD-RW drive at ata1 as slave
acd0: read 8268KB/s (4782KB/s) write 8268KB/s (8268KB/s), 8192KB buffer, 
PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes: CD-R, CD-RW, test write
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
    ACPI-0438: *** Error: Looking up [\\_PR_.CPU0] in namespace, 
AE_NOT_FOUND
SearchNode 0xc0ca1b10 StartNode 0xc0ca1b10 ReturnNode 0
    ACPI-1299: *** Error: [NULL NAME], AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [\\_PR_.CPU0] in namespace, 
AE_NOT_FOUND
SearchNode 0xc0ca1b10 StartNode 0xc0ca1b10 ReturnNode 0
    ACPI-1299: *** Error: [NULL NAME], AE_NOT_FOUND
(probe3:ata1:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe3:ata1:0:1:0): NOT READY asc:3a,0
(probe3:ata1:0:1:0): Medium not present
pass0 at ata1 bus 0 target 1 lun 0
pass0: <SAMSUNG CD-R/RW SW-248F R601> Removable CD-ROM SCSI-0 device
pass0: Serial Number [
pass0: 16.000MB/s transfers
bootdev: a0200000 type=0 unit=0 slice=2 part=0 major=3
Mounting root from ufs:/dev/ad4s1a
ad4s1: type 0xa5, start 63, end = 80035829, size 80035767 : OK
(cd0:ata1:0:1:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ata1:0:1:0): NOT READY asc:3a,0
(cd0:ata1:0:1:0): Medium not present
cd0 at ata1 bus 0 target 1 lun 0
cd0: <SAMSUNG CD-R/RW SW-248F R601> Removable CD-ROM SCSI-0 device
cd0: Serial Number [
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
start_init: trying /sbin/init 







More information about the Kernel mailing list