Fatal trap 19: non-maskable interrupt trap while in kernel mode

Sat Nov 6 05:18:59 PST 2004

Matthew Dillon Ãrta:

>     fetch
>     ftp://crater.dragonflybsd.org/iso-images/dfly-20041105-stable.iso.gz
> 
>     If it doesn't work there's one more thing I can try that is a bit more
>     iffy.  I'm hoping the current patch does the trick.

I played a bit with OpenBSD 3.6. With firewire enabled kernel (not GENERIC)
i successfully booted up my box. Firewire is initialized properly as you
can see:

fwohci0 at pci0 dev 6 function 0 "Texas Instruments TSB43AB21 FireWire" rev
0x00: irq 11
fwohci0: OHCI 1.1, 00:90:f5:00:00:32:10:37, 400Mb/s, 2048 max_rec, 4 iso_ctx

dmesg:

>> OpenBSD/amd64 BOOT 2.06

com0: 9600 baud
boot>
booting hd0a:/bsd: 2679064+714145+433632+0+546256
[80+241104+142351]=0x88a300
entry point at 0x1001e0 [7205c766, 34000004, 24448b12, 12e0a304]ÅžÅ±[ using
384304 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2004 OpenBSD. All rights reserved. 
http://www.OpenBSD.org

OpenBSD 3.6-current (TREY) #0: Sat Nov  6 05:17:08 MST 2004
    root at xxxxxxxxxxxxxxxxxxxxx:/usr/src/sys/arch/amd64/compile/TREY
real mem = 266924032 (260668K)
avail mem = 218984448 (213852K)
using 6567 buffers containing 26898432 bytes (26268K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Mobile AMD Athlon(tm) 64 Processor 3000+, 1804.39 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "VIA K8HTB Host" rev 0x01
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M10 NP" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fwohci0 at pci0 dev 6 function 0 "Texas Instruments TSB43AB21 FireWire" rev
0x00: irq 11
fwohci0: OHCI 1.1, 00:90:f5:00:00:32:10:37, 400Mb/s, 2048 max_rec, 4 iso_ctx
re0 at pci0 dev 8 function 0 "Realtek 8169" rev 0x10: irq 5, address
00:90:f5:32:10:37
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
"ENE CB-1410 CardBus" rev 0x01 at pci0 dev 12 function 0 not configured
vendor "Winbond", unknown product 0x8481 (class mass storage subclass
miscellaneous, rev 0x01) at pci0 dev 14 function 0 not configured
vendor "Winbond", unknown product 0x8482 (class mass storage subclass
miscellaneous, rev 0x01) at pci0 dev 14 function 1 not configured
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB 2.0" rev 0x82: irq 5
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
"VIA VT8235 ISA" rev 0x00 at pci0 dev 17 function 0 not configured
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHT2040AT>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CDRW/DVD SN-324F, U204> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 10
ac97: codec id 0x414c4740 (Avance Logic ALC202)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auvia0
"VIA VT82C686 Modem" rev 0x80 at pci0 dev 17 function 6 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
fw at fwohci0 not configured
Automatic boot in progress: starting file system checks.
/dev/rwd0a: file system is clean; not checking
setting tty flags
starting network
starting system logger
starting rpc daemons:.
savecore: no core dump
checking quotas: done.
building ps databases: kvm dev.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files
starting network daemons: sendmail inetd sshd.
keyboard mapping set to hu
starting local daemons:.
standard daemons: cron.
Sat Nov  6 22:18:21 CET 2004

OpenBSD/amd64 (amd64mobile.trey.hu) (tty00)

login:

- 
trey