Fatal trap 19: non-maskable interrupt trap while in kernel mode

Gabor MICSKO trey at hup.hu
Fri Nov 5 11:01:39 PST 2004


Simon 'corecode' Schubert írta:

> could you try a more recent -stable snapshot? 1.0a-release is pretty
> outdated now.

I tried LATEST-Stable.iso

Results are here:

 
Type '?' for a list of commands, 'help' for more detailed help.
OK boot -Dh
/modules/acpi.ko text=0x42ab8 data=0x1cd4+0x878 syms=[0x4+0x6630+0x4+0x7f56]
Copyright (c) 2003, 2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly 1.1-Stable #0: Fri Nov  5 13:17:44 GMT 2004
    root at xxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
TSC clock: 1804093886 Hz, i8254 clock: 1193184 Hz
CPU: Mobile AMD Athlon(tm) 64 Processor 3000+ (1804.10-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0xf4a  Stepping = 10
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500000<<b20>,AMIE,<b29>,DSP,3DNow!>
real memory  = 267321344 (261056K bytes)
avail memory = 249208832 (243368K bytes)
Preloaded elf kernel "/kernel" at 0xc0660000.
Preloaded elf module "/modules/acpi.ko" at 0xc066021c.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00fdf20
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <PTLTD   RSDT> on motherboard
installed MI handler for int 10
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (154.8C)
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_ec0: <Embedded Controller: GPE 0xb> port 0x66,0x62 on acpi0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 8385 host to PCI bridge> mem 0xe0000000-0xefffffff at device 0.0
on pci0
pcib1: <PCI to PCI bridge (vendor=1106 device=b188)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4e50 graphics accelerator> at 0.0 irq 9
fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem
0xd0000000-0xd0003fff,0xd0008000-0xd00087ff irq 11 at device 6.0 on pci0
installed MI handler for int 11
fwohci0: OHCI version 1.10 (ROM=1)
NMI ISA b1, EISA ff
RAM parity error, likely hardware failure.

Fatal trap 19: non-maskable interrupt trap while in kernel mode
instruction pointer     = 0x8:0xc01e3b6e
stack pointer           = 0x10:0xc0682c24
frame pointer           = 0x10:0xc0682c44
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, IOPL = 0
current process         = 0 (swapper)
current thread          = pri 12
interrupt mask          = net tty bio cam
kernel: type 19 trap, code=0
Stopped at      fwohci_init+0xfa:       movl    %ecx,%edi
db> tr
fwohci_init(c9823000,c604af18) at fwohci_init+0xfa
fwohci_pci_attach(c604af18,c604af18,c604ae40,c0682cb4,0) at
fwohci_pci_attach+0x1eb
device_probe_and_attach(c604af18) at device_probe_and_attach+0xf2
bus_generic_attach(c604ae40,c604ae40,0,5c,c6049fa0) at
bus_generic_attach+0x16
pci_attach(c604ae40,c604ae40,c6049fa0,0,1) at pci_attach+0xb3
device_probe_and_attach(c604ae40) at device_probe_and_attach+0xf2
bus_generic_attach(c6049fa0,c6049fa0,c04b6dd8,0,c6049fa0) at
bus_generic_attach+0x16
nexus_pcib_attach(c6049fa0,c6049fa0,c6049ec8,0,1) at nexus_pcib_attach+0x1f
device_probe_and_attach(c6049fa0) at device_probe_and_attach+0xf2
bus_generic_attach(c6049ec8,c6049e80,c0682d5c,c026b5d6,c6049ec8) at
bus_generic_attach+0x16
nexus_attach(c6049ec8,c6049ec8,c606c6d4,68d000,1) at nexus_attach+0xd
device_probe_and_attach(c6049ec8) at device_probe_and_attach+0xf2
root_bus_configure(c6049e80,c04abf60,0,4) at root_bus_configure+0x16
configure(0,67fc00,68d000,0,c013b28c) at configure+0x22
mi_startup(67f000,0,0,0,0) at mi_startup+0x90
begin() at begin+0x43
db> ps
  pid   proc     addr    uid  ppid  pgrp  flag stat wmesg   wchan   cmd
    1 c6d36e00 c6d3eda0    0     0     0 000204  1                  swapper
    0 c04e0fc0 c0682da0    0     0     0 000204  2                  swapper
cpu 0 tdrunqmask 00001000 curthread 0xc04e1140 reqflags 0002
       uschedcp 0 (-1) upri 0
      INCOMMING IPIQS:
  tdq     thread    pid flags  pri(act)        sp    wmesg comm
   12 0xc6d3bde0  -1 00000e02  44( 12) 0xc771ed88        - cryptoret
   12 0xc6d3bd00  -1 00000e02  44( 12) 0xc9754d88        - taskqueue
   12 0xc6d3bc20  -1 00000e02  44( 12) 0xc975fd88        - acpi_task
   12 0xc6d3bb40  -1 00000e02  44( 12) 0xc9822d88        - acpi_thermal

  tdq     thread    pid flags  pri(act)        sp    wmesg comm
   32 0xff80034c  -1 00000000  44( 12) 0xff807d8c        - idle_0
   32 0xc04e1140   0 00000001  12( 12) 0xc0682d90        - swapper
   32 0xc0537c74  -1 00010c00  46( 14) 0xc0f57d88        - softclock 0
   32 0xc05319a0  -1 00010c00 110( 14) 0xc0f5ad88        - ithread 20
   32 0xc6d3bec0   1 00000600  42( 10) 0xc6d3ed3c        - swapper
   32 0xc0531800  -1 00010c00 110( 14) 0xc771bd88        - ithread 18
   32 0xc6d3bde0  -1 00000e02  44( 12) 0xc771ed88        - cryptoret
   32 0xc05318d0  -1 00010c00 110( 14) 0xc974ed88        - ithread 19
   32 0xc0531a70  -1 00010c00 110( 14) 0xc9751d88        - ithread 21
   32 0xc6d3bd00  -1 00000e02  44( 12) 0xc9754d88        - taskqueue
   32 0xc0531180  -1 00010c00 124( 28) 0xc975bd88        - ithread 10
   32 0xc6d3bc20  -1 00000e02  44( 12) 0xc975fd88        - acpi_task
   32 0xc6d3bb40  -1 00000e02  44( 12) 0xc9822d88        - acpi_thermal
   32 0xc0531250  -1 00010c00 124( 28) 0xc982dd88        - ithread 11
CURCPU 0 CURTHREAD 0xc04e1140 (0) USCHEDCP 0 (-1) UPRI 0
db>


Type '?' for a list of commands, 'help' for more detailed help.
OK set hint.acpi.0.disable="1"
OK boot -Dh
/modules/acpi.ko text=0x42ab8 data=0x1cd4+0x878 syms=[0x4+0x6630+0x4+0x7f56]
Copyright (c) 2003, 2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly 1.1-Stable #0: Fri Nov  5 13:17:44 GMT 2004
    root at xxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
TSC clock: 1804117942 Hz, i8254 clock: 1193200 Hz
CPU: Mobile AMD Athlon(tm) 64 Processor 3000+ (1804.10-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0xf4a  Stepping = 10
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500000<<b20>,AMIE,<b29>,DSP,3DNow!>
real memory  = 267321344 (261056K bytes)
avail memory = 249208832 (243368K bytes)
Preloaded elf kernel "/kernel" at 0xc0660000.
Preloaded elf module "/modules/acpi.ko" at 0xc066021c.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00fdf20
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <PTLTD   RSDT> on motherboard
installed MI handler for int 10
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (154.8C)
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_ec0: <Embedded Controller: GPE 0xb> port 0x66,0x62 on acpi0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 8385 host to PCI bridge> mem 0xe0000000-0xefffffff at device 0.0
on pci0
pcib1: <PCI to PCI bridge (vendor=1106 device=b188)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4e50 graphics accelerator> at 0.0 irq 9
fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem
0xd0000000-0xd0003fff,0xd0008000-0xd00087ff irq 11 at device 6.0 on pci0
installed MI handler for int 11
fwohci0: OHCI version 1.10 (ROM=1)
NMI ISA b1, EISA ff
RAM parity error, likely hardware failure.

Fatal trap 19: non-maskable interrupt trap while in kernel mode
instruction pointer     = 0x8:0xc01e3b6e
stack pointer           = 0x10:0xc0682c24
frame pointer           = 0x10:0xc0682c44
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, IOPL = 0
current process         = 0 (swapper)
current thread          = pri 12
interrupt mask          = net tty bio cam
kernel: type 19 trap, code=0
Stopped at      fwohci_init+0xfa:       movl    %ecx,%edi
db> tr
fwohci_init(c9823000,c604af18) at fwohci_init+0xfa
fwohci_pci_attach(c604af18,c604af18,c604ae40,c0682cb4,0) at
fwohci_pci_attach+0x1eb
device_probe_and_attach(c604af18) at device_probe_and_attach+0xf2
bus_generic_attach(c604ae40,c604ae40,0,5c,c6049fa0) at
bus_generic_attach+0x16
pci_attach(c604ae40,c604ae40,c6049fa0,0,1) at pci_attach+0xb3
device_probe_and_attach(c604ae40) at device_probe_and_attach+0xf2
bus_generic_attach(c6049fa0,c6049fa0,c04b6dd8,0,c6049fa0) at
bus_generic_attach+0x16
nexus_pcib_attach(c6049fa0,c6049fa0,c6049ec8,0,1) at nexus_pcib_attach+0x1f
device_probe_and_attach(c6049fa0) at device_probe_and_attach+0xf2
bus_generic_attach(c6049ec8,c6049e80,c0682d5c,c026b5d6,c6049ec8) at
bus_generic_attach+0x16
nexus_attach(c6049ec8,c6049ec8,c606c6d4,68d000,1) at nexus_attach+0xd
device_probe_and_attach(c6049ec8) at device_probe_and_attach+0xf2
root_bus_configure(c6049e80,c04abf60,0,4) at root_bus_configure+0x16
configure(0,67fc00,68d000,0,c013b28c) at configure+0x22
mi_startup(67f000,0,0,0,0) at mi_startup+0x90
begin() at begin+0x43
db> ps
  pid   proc     addr    uid  ppid  pgrp  flag stat wmesg   wchan   cmd
    1 c6d36e00 c6d3eda0    0     0     0 000204  1                  swapper
    0 c04e0fc0 c0682da0    0     0     0 000204  2                  swapper
cpu 0 tdrunqmask 00001000 curthread 0xc04e1140 reqflags 0002
       uschedcp 0 (-1) upri 0
      INCOMMING IPIQS:
  tdq     thread    pid flags  pri(act)        sp    wmesg comm
   12 0xc6d3bde0  -1 00000e02  44( 12) 0xc771ed88        - cryptoret
   12 0xc6d3bd00  -1 00000e02  44( 12) 0xc9754d88        - taskqueue
   12 0xc6d3bc20  -1 00000e02  44( 12) 0xc975fd88        - acpi_task
   12 0xc6d3bb40  -1 00000e02  44( 12) 0xc9822d88        - acpi_thermal

  tdq     thread    pid flags  pri(act)        sp    wmesg comm
   32 0xff80034c  -1 00000000  44( 12) 0xff807d8c        - idle_0
   32 0xc04e1140   0 00000001  12( 12) 0xc0682d90        - swapper
   32 0xc0537c74  -1 00010c00  46( 14) 0xc0f57d88        - softclock 0
   32 0xc05319a0  -1 00010c00 110( 14) 0xc0f5ad88        - ithread 20
   32 0xc6d3bec0   1 00000600  42( 10) 0xc6d3ed3c        - swapper
   32 0xc0531800  -1 00010c00 110( 14) 0xc771bd88        - ithread 18
   32 0xc6d3bde0  -1 00000e02  44( 12) 0xc771ed88        - cryptoret
   32 0xc05318d0  -1 00010c00 110( 14) 0xc974ed88        - ithread 19
   32 0xc0531a70  -1 00010c00 110( 14) 0xc9751d88        - ithread 21
   32 0xc6d3bd00  -1 00000e02  44( 12) 0xc9754d88        - taskqueue
   32 0xc0531180  -1 00010c00 124( 28) 0xc975bd88        - ithread 10
   32 0xc6d3bc20  -1 00000e02  44( 12) 0xc975fd88        - acpi_task
   32 0xc6d3bb40  -1 00000e02  44( 12) 0xc9822d88        - acpi_thermal
   32 0xc0531250  -1 00010c00 124( 28) 0xc982dd88        - ithread 11
CURCPU 0 CURTHREAD 0xc04e1140 (0) USCHEDCP 0 (-1) UPRI 0
db>

thanks.





More information about the Kernel mailing list