HEADS UP FreeBSD-5 boot code has been committed

Tue Nov 18 10:41:49 PST 2003

Dmesg follows...note the if_fxp and snd_es137x modules being loaded at the
end (done manually at command prompt).

>>>>>
:> I still can neither boot a static fxp/miibus kernel nor a 
:> modular kernel with sources as of this morning (EDT). I'm 
:> using a modular 4.9 kernel (kernel + if_fxp + miibus) 
:> temporarily. Attached is modular kernel config. World/Kernel 
:> built/installed appropriately...
:
:Okay. I can again boot a dfbsd (modular) kernel. However, given my
:loader.conf:
:
:if_fxp_load="YES"
:snd_es137x_load="YES"
:linux_load="YES"
:
:hw.ata.atapi_dma=1
:kern.maxusers=0
:hw.pci.enable_io_modes=1
:hw.pci.allow_unsupported_io_range=1
:
:The machine only shows the following modules loaded (once booted):
:Id Refs Address    Size     Name
: 1    4 0xc0100000 28a600   kernel
: 2    1 0xc038b000 1c04c    linux.ko
: 4    1 0xc03b3000 17428    miibus.ko
: 6    1 0xc03d2000 1987c    snd_pcm.ko
:
:Interesting that fxp and es137x do not get loaded but their dependents do.
:Also, at the boot loader, if I do an lsmod, *all* modules report to be
:preloaded.
:
:I'm simply loading the missing if_fxp.ko and snd_es137x.ko by hand once
:booted in the itnerim.

    Post your 'dmesg' output.
>>>>>

# cat /var/run/dmesg.boot

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.8-STABLE #0: Tue Nov 18 10:47:10 EST 2003
    root at xxxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/dragonfly
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 805641042 Hz
CPU: AMD Athlon(tm) Processor (805.64-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x622  Stepping = 2

Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,P
AT,PSE36,MMX,FXSR>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 268369920 (262080K bytes)
avail memory = 253218816 (247284K bytes)
Preloaded elf kernel "/kernel" at 0xc03ed000.
Preloaded elf module "/modules/linux.ko" at 0xc03ed1e8. Preloaded elf module
"/modules/if_fxp.ko" at 0xc03ed290.
link_aout_load_file: cannot load 'miibus.ko' from filesystem this early
link_aout_load_file: cannot load 'miibus' from filesystem this early
link_elf_load_file: cannot load 'miibus.ko' from filesystem this early
link_elf_load_file: cannot load 'miibus' from filesystem this early Preloaded
elf module "/modules/miibus.ko" at 0xc03ed338. Preloaded elf module
"/modules/snd_es137x.ko" at 0xc03ed3e0.
link_aout_load_file: cannot load 'snd_pcm.ko' from filesystem this early
link_aout_load_file: cannot load 'snd_pcm' from filesystem this early
link_elf_load_file: cannot load 'snd_pcm.ko' from filesystem this early
link_elf_load_file: cannot load 'snd_pcm' from filesystem this early
Preloaded elf module "/modules/snd_pcm.ko" at 0xc03ed48c. Pentium Pro MTRR
support enabled Using $PIR table, 7 entries at 0xc00f8120
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT > on motherboard
installed MI handler for int 5
    ACPI-1288: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-0176: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe"  frequency 3579545 Hz
    ACPI-1288: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-0176: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
    ACPI-1288: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-0176: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-1288: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-0176: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-1288: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-0176: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-1288: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-0176: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-1288: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-0176: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-1288: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-0176: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-1288: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-0176: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-1288: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-0176: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-1288: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-0176: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-1288: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-0176: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-1288: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-0176: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-1288: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-0176: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-1288: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-0176: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-1288: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
    ACPI-0176: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.PS2M._STA] (Node 0xc1041ef8), AE_AML_REGION_LIMIT
pcib0: <AMD-751 host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <AMD 751 host to AGP bridge> port 0xd800-0xd803 mem
0xef9ff000-0xef9fffff,0xe8000000-0xebffffff at device 0.0 on pci0
pcib1: <AMD-751 PCI-PCI (1x/2x AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 5046 graphics accelerator> at 5.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xffa0-0xffaf at device 4.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
pci0: <VIA 83C572 USB controller> at 4.2 irq 12
pci0: <VIA 83C572 USB controller> at 4.3 irq 12
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 4.4
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xdc00-0xdcff mem
0xeffff000-0xefffffff irq 10 at device 14.0 on pci0 installed MI handler for
int 10
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
pci0: <unknown card> (vendor=0x8086, dev=0x1229) at 15.0 irq 9
pci0: <unknown card> (vendor=0x1274, dev=0x5000) at 16.0 irq 12
orm0: <Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xd5fff,0xd6000-0xd7fff
on isa0 pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
installed MI handler for int 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
installed MI handler for int 3
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
installed MI handler for int 7
installed MI handler for int 0
installed MI handler for int 8
ata1-slave: ATA identify retries exceeded
ata1-master: ATA identify retries exceeded
ad0: 4110MB <QUANTUM FIREBALL CR4.3A> [14848/9/63] at ata0-master UDMA66
Waiting 2 seconds for SCSI devices to settle
WARNING: "cd" is usurping "cd"'s cdevsw[]
Mounting root from ufs:/dev/ad0s1a
cd1 at ahc0 bus 0 target 5 lun 0
cd1: <KENWOOD CD-ROM UCR-415 100K> Removable CD-ROM SCSI-2 device 
cd1: 20.000MB/s transfers (20.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xcc00-0xcc3f
mem 0xefe00000-0xefefffff,0xefffe000-0xefffefff irq 9 at device 15.0 on pci0
installed MI handler for int 9
fxp0: Ethernet address 00:02:b3:38:50:44
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <AudioPCI ES1370> port 0xc800-0xc83f irq 12 at device 16.0 on pci0
installed MI handler for int 12 cd0 at ahc0 bus 0 target 4 lun 0
cd0: <RICOH MP6201S 2.40> Removable CD-ROM SCSI-2 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
fxp0: Microcode loaded, int_delay: 1000 usec  bundle_max: 6

**HEADS UP** FreeBSD-5 boot code has been committed

HEADS UP FreeBSD-5 boot code has been committed