[DragonFlyBSD - Bug #2899] Install DragonFly to SD card

[bugtracker-admin at leaf.dragonflybsd.org]

Issue #2899 has been updated by dpostolov.


Updated by swildner about 2 months ago>

There have been fixes to mmcsd etc. in recent times and just today I pushed another fix. If you still have this setup lying around, can you try with a current snapshot again (my fix should be on it too in a day or two)?

Updated by dpostolov about 2 months ago>

I am sorry, but now I am use only one NUC DN2820FYKH without cardreader. NUC5PPYH with cardreader in reservation.

--- Sorry for my bad English...

I am return Intel NUC5PPYH with cardreader to my Home WorkSpace and try to install latest DragonFly BSD image from May 12. All OK and I am successfully install and run DragonFly BSD from SD Card Sony 32 GB.

uname -a

DragonFly dfly.local 4.9-DEVELOPMENT DragonFly v4.9.242.gfa5c6-DEVELOPMENT #0: Fri May 12 12:28:22 UTC 2017 root at pkgbox64.dragonflybsd.org: /usr/obj/usr/src/sys/x86_64_GENERIC x86_64

The problem is [SOLVED].



----------------------------------------
Bug #2899: Install DragonFly to SD card
http://bugs.dragonflybsd.org/issues/2899#change-13142

* Author: dpostolov
* Status: New
* Priority: Normal
* Assignee: 
* Category: 
* Target version: 
----------------------------------------
Hi to all DragonFly BSD developers and Community!
 
Sorry for my bad English...
 
I am try to install DragonFly BSD to my mini-PC Intel NUC5PPYH CPU Intel N3700, latest at this time BIOS 0050, to SD card Sony 32GB. NUC5PPYH BIOS supports booting Linux/FreeBSD from SD card.
 
uname -a
DragonFly dfw-7732.localdomain 4.5-DEVELOPMENT DragonFly v4.5.0.763.g541aa16-DEVELOPMENT #0: Tue Mar 29 10:54:30 UTC 2016    root at pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC  x86_64
 
FreeBSD 10.3 successfully installed and works from SD card, but DragonFly is not. As I am understand, DragonFly detected SD, but Dfly Installer cant support geometry of this mmcsd0.
 
How I can install DragonFly BSD to SD card?
 
I am booted from USB stick and can installing Dfly to USB stick or HDD (later, afrer buying new HDD after failed previous), DragonFly Installer: Select a disk on which to install DragonFly BSD.
<da8: 7643MB (15654848 512 byte sectors: 255 63S/T 974C) > # This is bootable USB stick-installer
<mmcsd0> [void space]
 
If select mmcsd0, then Dfly Installer say about error. As I am understand, Installer cant recognized geometry of SD.
 
ls /dev/mmc* # on mmcsd0 installed version of FreeBSD 10.3
/dev/mmcsd0 /dev/mmcsd0s0 /dev/mmcsd0s1 /dev/mmcsd0s2
 
pciconf -lv
sdhci_pci0 at pci0:0:18:0 class=0x080501 card=0x20608086 chip=0x22968086 rev 0x21 hdr=0x00
vendor = 'Intel Corporation'
class = base peripherial
subclass = SD host controller
 
dmesg | grep sd
sdhci_pci0:< Generic SD HCI > mem 0x8141b000 - 0x8141bfff irq 18 at device 18.0 on pci0
sd hci_pci0:1slot(s) allocated
mmc0:<MMC/SD bus> on sdhci_pci0
mmcsd0:29GB < SDHC Memory Card > at mmc0 50Mhz/4bit
 
On FreeBSD different output data is:
 
dmesg | grep sd
mmcsd0:32GB < SDHC SD32G 3.0 SN7C400885 MFG 02/2015 by 39 PH > at mmc0 50Mhz/4bit/65535-block
 
---
 
best regards,
Dmitry Postolov
dpostolov at yandex.ru



-- 
You have received this notification because you have either subscribed to it, or are involved in it.
To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account