[DragonFlyBSD - Bug #2892] (New) swap_pager:indefinite wait bufferf error

bugtracker-admin at leaf.dragonflybsd.org bugtracker-admin at leaf.dragonflybsd.org
Sun Feb 21 22:23:42 PST 2016 

Issue #2892 has been reported by lhmwzy.

----------------------------------------
Bug #2892: swap_pager:indefinite wait bufferf error
http://bugs.dragonflybsd.org/issues/2892

* Author: lhmwzy
* Status: New
* Priority: Normal
* Assignee: 
* Category: 
* Target version: 
----------------------------------------
on my machine,the consle show "swap_pager:indefinite wait bufferf :offset
601985024,size:4096",the system is panic,only power off and reboot,then the
system will goes well.

# uname -a                                          [pts/0][2:08:51pm]
DragonFly fuhai.com 4.4-RELEASE DragonFly v4.4.1.12.g25e86-RELEASE #0: Tue
Jan 19 08:42:18 CST 2016     lhm at fuhai.com:/usr/obj/usr/src/sys/fuhai
x86_64

dmesg:
Copyright (c) 2003-2015 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
MPTABLE: use default configuration
DragonFly v4.4.1.12.g25e86-RELEASE #0: Tue Jan 19 08:42:18 CST 2016
    lhm at fuhai.com:/usr/obj/usr/src/sys/fuhai
TSC clock: 3200021008 Hz, i8254 clock: 1193148 Hz
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.13-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0xf65  Stepping = 5

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe59d<SSE3,DTES64,MON,DS_CPL,EST,TM2,CNXT-ID,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
real memory  = 1037026304 (988 MB)
Warning: nbufs capped at 7634 due to physmem
avail memory = 936284160 (892 MB)
lapic: divisor index 0, frequency 100003905 Hz
Initialize MI interrupts
VMM: VMX is not supported by this Intel CPU
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
md0: Malloc disk
ACPI: RSDP 0x00000000000FEBF0 000024 (v02 DELL  )
ACPI: XSDT 0x00000000000FD07A 00005C (v01 DELL   B8K      00000014 ASL
00000061)
ACPI: FACP 0x00000000000FD192 0000F4 (v03 DELL   B8K      00000014 ASL
00000061)
ACPI: DSDT 0x00000000FFFCA3A8 0038C6 (v01 DELL   dt_ex    00001000 INTL
20050624)
ACPI: FACS 0x000000003DE5C800 000040
ACPI: FACS 0x000000003DE5C800 000040
ACPI: SSDT 0x00000000FFFCDD8F 0000AC (v01 DELL   st_ex    00001000 INTL
20050624)
ACPI: APIC 0x00000000000FD286 000092 (v01 DELL   B8K      00000014 ASL
00000061)
ACPI: BOOT 0x00000000000FD318 000028 (v01 DELL   B8K      00000014 ASL
00000061)
ACPI: MCFG 0x00000000000FD340 00003E (v01 DELL   B8K      00000014 ASL
00000061)
ACPI: HPET 0x00000000000FD37E 000038 (v01 DELL   B8K      00000014 ASL
00000061)
ACPI: SLIC 0x00000000000FD3B6 0000C0 (v01 DELL   B8K      00000014 ASL
00000061)
acpi0: <DELL B8K    > on motherboard
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/low
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
acpi_timer0 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
acpi_hpet0: frequency 14318180
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xec00-0xecff mem
0xdfdf0000-0xdfdfffff,0xd0000000-0xd7ffffff irq 17 at device 5.0 on pci1
vgapci0: Boot video device
ahci0: <ATI-SB600-SATA> port
0xfec0-0xfecf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 mem
0xdfff6c00-0xdfff6fff irq 23 at device 18.0 on pci0
ahci0: AHCI 1.1 cap
0xf722ff83<S64A,NCQ,SSNTF,SMPS,SALP,SAL,SCLO,SPM,PMD,SSC,PSC,CCCS>, 4
ports, 32 tags/port, gen 2 (3Gbps)
ahci0.0: Caps 42006<HPCP,MPSS,POD,SUD>
ahci0.1: Caps 42006<HPCP,MPSS,POD,SUD>
ahci0.2: Caps 42006<HPCP,MPSS,POD,SUD>
ahci0.3: Caps 42006<HPCP,MPSS,POD,SUD>
ahci0.2: No device detected
ahci0.3: No device detected
ahci0.0: PMPROBE(2) No Port Multiplier was found.
ahci0.1: PMPROBE(2) No Port Multiplier was found.
ahci0.0: PMPROBE(2) No Port Multiplier was found.
ahci0.1: PMPROBE(2) No Port Multiplier was found.
ahci0.0: Found DISK "WDC WD800JD-75MSA3 10.01E04" serial="WD-WMAM9NY02964"
ahci0.0: tags=32/32 satacap=0706 satacap2=0000 satafea=004c NCQ=YES
capacity=76293.94MB
ahci0.0: f85=7469 f86=3e01 f87=4023 WC=enabled RA=enabled SEC=frozen
ahci0.1: Found ATAPI "TSSTcorpDVD-ROM TS-H353B D200" serial=""
ahci0.1: tags=0/32 satacap=0002 satacap2=0000 satafea=0040 NCQ=NO
capacity=1.00MB
ahci0.1: f85=0000 f86=0000 f87=4000 WC=notsupp RA=notsupp SEC=notsupp
ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6)
ahci0.1: TFES: Unable to determine errored slot
ahci0.1: Failing all commands: 00000020
ahci0.1: cmd 18: timeout
ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6)
ahci0.1: TFES: Unable to determine errored slot
ahci0.1: Failing all commands: 00000040
ahci0.1: cmd 18: timeout
ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6)
ahci0.1: TFES: Unable to determine errored slot
ahci0.1: Failing all commands: 00000080
ahci0.1: cmd 18: timeout
ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6)
ahci0.1: TFES: Unable to determine errored slot
ahci0.1: Failing all commands: 00000100
ahci0.1: cmd 18: timeout
ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6)
ahci0.1: TFES: Unable to determine errored slot
ahci0.1: Failing all commands: 00000200
ahci0.1: cmd 18: timeout
ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6)
ahci0.1: TFES: Unable to determine errored slot
ahci0.1: Failing all commands: 00000400
ahci0.1: cmd 0: timeout
ohci0: <OHCI (generic) USB controller> mem 0xdfff7000-0xdfff7fff irq 16 at
device 19.0 on pci0
usbus0 on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xdfff8000-0xdfff8fff irq 17 at
device 19.1 on pci0
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
usbus1 on ohci1
ohci2: <OHCI (generic) USB controller> mem 0xdfff9000-0xdfff9fff irq 18 at
device 19.2 on pci0
usbus1: 12Mbps Full Speed USB v1.0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
usbus2 on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xdfffa000-0xdfffafff irq 17 at
device 19.3 on pci0
usbus2: 12Mbps Full Speed USB v1.0
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub1: 2 ports with 2 removable, self powered
usbus3 on ohci3
ohci4: <OHCI (generic) USB controller> mem 0xdfffb000-0xdfffbfff irq 18 at
device 19.4 on pci0
usbus3: 12Mbps Full Speed USB v1.0
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub2: 2 ports with 2 removable, self powered
usbus4 on ohci4
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfff6900-0xdfff69ff irq 19
at device 19.5 on pci0
ehci0: AMD SB600/700 quirk applied
usbus5: EHCI version 1.0
usbus4: 12Mbps Full Speed USB v1.0
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
usbus5 on ehci0
pci0: <serial bus, SMBus> (vendor 0x1002, dev 0x4385) at device 20.0
atapci0: <ATI SB600 UDMA133 controller> port
0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 16 at device 20.1 on
pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <multimedia, HDA> (vendor 0x1002, dev 0x4383) at device 20.2 irq 16
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib2
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xdfcfe000-0xdfcfffff irq 21
at device 9.0 on pci2
miibus0: <MII bus> on bfe0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
usbus5: 480Mbps High Speed USB v2.0
uhub3: 2 ports with 2 removable, self powered
bfe0: MAC address: 00:1a:a0:24:d1:de
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
ACPI: Enabled 1 GPEs in block 00 to 1F
cryptosoft0: <software crypto> on motherboard
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc9fff,0xca000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
CAM: Configuring 4 busses
ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6)
ahci0.1: TFES: Unable to determine errored slot
ahci0.1: Failing all commands: 00000800
ahci0.1: cmd 0: timeout
ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6)
ahci0.1: TFES: Unable to determine errored slot
ahci0.1: Failing all commands: 00001000
ahci0.1: cmd 0: timeout
ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6)
ahci0.1: TFES: Unable to determine errored slot
ahci0.1: Failing all commands: 00002000
ahci0.1: cmd 0: timeout
uhub4: 2 ports with 2 removable, self powered
ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6)
ahci0.1: TFES: Unable to determine errored slot
ahci0.1: Failing all commands: 00004000
ahci0.1: cmd 0: timeout
ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6)
ahci0.1: TFES: Unable to determine errored slot
ahci0.1: Failing all commands: 00008000
ahci0.1: cmd 0: timeout
ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6)
ahci0.1: TFES: Unable to determine errored slot
ahci0.1: Failing all commands: 00040000
ahci0.1: cmd 18: timeout
ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6)
ahci0.1: TFES: Unable to determine errored slot
ahci0.1: Failing all commands: 00080000
ahci0.1: cmd 18: timeout
ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6)
ahci0.1: TFES: Unable to determine errored slot
ahci0.1: Failing all commands: 00100000
ahci0.1: cmd 18: timeout
ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6)
ahci0.1: TFES: Unable to determine errored slot
ahci0.1: Failing all commands: 00200000
ahci0.1: cmd 18: timeout
ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6)
ahci0.1: TFES: Unable to determine errored slot
ahci0.1: Failing all commands: 00400000
ahci0.1: cmd 18: timeout
CAM: finished configuring all busses
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA WDC WD800JD-75MS 10.0> Fixed Direct Access SCSI-4 device
da0: Serial Number WD-WMAM9NY02964
da0: 300.000MB/s transfers
da0: 76293MB (156250000 512 byte sectors: 255H 63S/T 9726C)
uhub5: 10 ports with 10 removable, self powered
no B_DEVMAGIC (bootdev=0)
Mounting root from hammer:serno/WD-WMAM9NY02964.s1d
HAMMER(ROOT) recovery check seqno=0aa1c660
HAMMER(ROOT) recovery range 3000000002d94358-3000000002d94358
HAMMER(ROOT) recovery nexto 3000000002d94358 endseqno=0aa1c661
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 6288k, remaining available: 61064k
Mounting devfs
swap low/high-water marks set to 20970/31455


my custom kernel config:



-- 
You have received this notification because you have either subscribed to it, or are involved in it.
To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account

More information about the Bugs mailing list