[DragonFlyBSD - Bug #2823] Intel Q9400 PC fails to boot waiting for the following device xpt interrupt routing is probably hosed

[bugtracker-admin at leaf.dragonflybsd.org]

Issue #2823 has been updated by davshao.

File camsysctlfix.diff added

Attached is a partial fix.  There are two initializations that seem to be missing, a M_ZERO for a kmalloc for a cam_eb struct in cam_xpt.c and a LOCK_INITIALIZER for the new lock field in struct sysctl_oid in the macro SYSCTL_OID.  The attached patch allows the Core 2 Intel Q9400 to boot in ordinary but not in bootverbose mode.  When booting with bootverbose there is an error message about "can't re-use a leaf (WD_WMATV5981256)" where that is apparently part of the configuration of da0:

da0 at ahci0 bus 1 target 0 lun 0
da0: <SATA WDC WD1002FBYS-0 03.0> Fixed Direct Access SCSI-4 device 
da0: Serial Number WD-WMATV5981256
da0: 300.000MB/s transfers

The missing M_ZERO for allocating a new struct cam_eb appears to make the initial value of the counted_to_config field random.  I have included additional debugging information in the bootverbose sections of cam_xpt.c that allowed me to see that 6 busses ahci0.0 through ahci0.5 were being asked to configured by function xptconfigfunc() in cam_xpt.c, but only 5 were being counted by xptconfigbuscountfunc(), with ahci0.0 missing.  

I can only conjecture as to the necessity of LOCK_INITIALIZER for the lock field of struct sysctl_oid, but it appears to me that macro SYSCTL_OID from sysctl.h in sys/dev/raid/hptmv/hptproc.c is used to initialize a node hptmv.status in the sysctl tree whose root hptmv is somewhat an outlier.  This may also be related to why I have only seen this difficulty booting one one older machine.

----------------------------------------
Bug #2823: Intel Q9400 PC fails to boot waiting for the following device xpt interrupt routing is probably hosed
http://bugs.dragonflybsd.org/issues/2823#change-12678

* Author: davshao
* Status: New
* Priority: Normal
* Assignee: 
* Category: 
* Target version: 
----------------------------------------
For one Intel Core 2 Q9400 machine, booting fails with console output listed below.  The same problem has not been observed on a couple of newer generation Intel-based PCs.  Bisection seems to indicate the problem began between, inclusive, master commit

commit 6f1a15dc79a822710cc37e99f6a8bd9910e5e3f1
Date:   Sat Jun 6 16:17:41 2015 -0700

    sysctl - SMP performance work

and

commit bb06d795144b04574aa0b5fdb94e95ab77360a1a
Date:   Sun Jun 7 04:16:12 2015 +0200

    <sys/sysctl.h>: Include <sys/lock.h> only for the kernel (unbreaks world).

Attached is a full verbose dmesg from a successful boot with a previous kernel.

Console output for unsuccessful boot:

CAM:  finished configuring all busses
**WARNING** waiting for the following device to finish configuring:
  xpt:   func=0xffffffff8029ea32 arg=0
**WARNING** waiting for the following device to finish configuring:
  xpt:   func=0xffffffff8029ea32 arg=0
**WARNING** waiting for the following device to finish configuring:
  xpt:   func=0xffffffff8029ea32 arg=0
**WARNING** waiting for the following device to finish configuring:
  xpt:   func=0xffffffff8029ea32 arg=0
**WARNING** waiting for the following device to finish configuring:
  xpt:   func=0xffffffff8029ea32 arg=0
Giving up, interrupt routing is probably hosed
no B_DEVMAGIC (bootdev=0)
ATA PseudoRAID loaded
Mounting root from hammer:serno/WD-WMATV8216330.s1d
no disk named 'serno/WD-WMATV8216330.s1d'
hammer_mountroot: can't find devvp
kthread 0xffffffe056318c80 syncer3 has exited
Root mount failed:6

Manual root filesystem specification
  <fstype>:<device>  Specify root (e.g. ufs:da0s1a)
  ?                  List valid disk boot devices
  panic              Just panic
  abort              Abort manual input

mountroot>

Dmesg output for earlier kernel, successful boot:

sl0: bpf attached
hpt27xx: no controller detected.
hptrr: no controller detected.
CAM: Configuring bus: ahci0
CAM: Configuring bus: ahci0
CAM: Configuring bus: ahci0
CAM: Configuring bus: ahci0
CAM: Configuring bus: ahci0
CAM: Configuring bus: ahci0
CAM: Configuring 6 busses
CAM: Finished configuring bus: ahci0
CAM: Finished configuring bus: ahci0
CAM: Finished configuring bus: ahci0
CAM: Finished configuring bus: ahci0
CAM: Finished configuring bus: ahci0
CAM: Finished configuring bus: ahci0
CAM: finished configuring all busses
pass0 at ahci0 bus 1 target 0 lun 0
pass0: <SATA WDC WD1002FBYS-0 03.0> Fixed Direct Access SCSI-4 device 
pass0: Serial Number WD-WMATV5981256
pass0: 300.000MB/s transfers
pass1 at ahci0 bus 2 target 0 lun 0
pass1: <SATA WDC WD1002FBYS-0 03.0> Fixed Direct Access SCSI-4 device 
pass1: Serial Number WD-WMATV8216330
pass1: 300.000MB/s transfers




---Files--------------------------------
q9400_dmesg_20150607.txt (53.3 KB)
revertsysctlsmp.diff (2.9 KB)
camsysctlfix.diff (2.36 KB)


-- 
You have received this notification because you have either subscribed to it, or are involved in it.
To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account