[DragonFlyBSD - Bug #846] (Feedback) USB bugs:usb mouse can't used!

bugtracker-admin at leaf.dragonflybsd.org bugtracker-admin at leaf.dragonflybsd.org
Thu Jan 15 08:36:56 PST 2015 

Issue #846 has been updated by tuxillo.

Description updated
Category set to Driver
Status changed from New to Feedback
Assignee deleted (0)
Target version set to Unverifiable

Hi,

Moving it to unverifiable.
Feel free to update if you can test it again.

Cheers,
Antonio Huete

----------------------------------------
Bug #846: USB bugs:usb mouse can't used!
http://bugs.dragonflybsd.org/issues/846#change-12470

* Author: frankning
* Status: Feedback
* Priority: Normal
* Assignee: 
* Category: Driver
* Target version: Unverifiable
----------------------------------------
I had use DFB 1.8.0,then my usb mouse can use.When I update to 1.10 and new 
version, the usb mouse cant't use.Someone can help me? Thanks!

Following is my dmesg:

Copyright (c) 2003, 2004, 2005, 2006, 2007 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.11.0-DEVELOPMENT #2: Tue Nov 13 00:12:24 CST 2007
    frank@:/usr/obj/usr/src/sys/NETONE
TSC clock: 1666701140 Hz, i8254 clock: 1193164 Hz
CPU: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz (1666.74-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
  
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO
V,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,SSSE3,CX16,XTPR,RSVD15>
  Hyperthreading: 2 logical CPUs
real memory  = 937951232 (915968K bytes)
avail memory = 899067904 (877996K bytes)
APIC_IO: MP table broken: ExtINT entry corrupt!
APIC_IO: MP table broken: IRQ 15 not ISA when IRQ 14 is!
Programming 24 pins in IOAPIC #0
DragonFly/MP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00050014, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00050014, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00178021, at 0xfec00000
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
SMP: AP CPU #1 Launched!
objcache(exec-args): too small for ncpus, adjusting cluster_limit 16->32
Preloaded elf kernel "/kernel" at 0xc078e000.
Preloaded elf module "/modules/acpi.ko" at 0xc078e2b0.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 19 entries at 0xc00fde90
ACPI: RSDP @ 0x0xf74f0/0x0014 (v  0 PTLTD )
ACPI: RSDT @ 0x0x37e8ec8c/0x0034 (v  1 HPQOEM SLIC-MPC 0x06040000  LTP 
0x00000000)
ACPI: FACP @ 0x0x37e95ef2/0x0074 (v  1 ATI    Bonefish 0x06040000 ATI  
0x000F4240)
ACPI: DSDT @ 0x0x37e8f69b/0x6857 (v  1    ATI    SB450 0x06040000 MSFT 
0x03000000)
ACPI: FACS @ 0x0x37e96fc0/0x0040
ACPI: APIC @ 0x0x37e95f66/0x005E (v  1 PTLTD  	 APIC   0x06040000  LTP 
0x00000000)
ACPI: MCFG @ 0x0x37e95fc4/0x003C (v  1 PTLTD    MCFG   0x06040000  LTP 
0x00000000)
ACPI: SSDT @ 0x0x37e8ecc0/0x0535 (v  1  PmRef    CpuPm 0x00003000 INTL 
0x20050228)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x66,0x62 on acpi0
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu1: Failed to attach throttling P_CNT
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
Warning: ACPI idle hook not yet supported for SMP
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
legacypci0 on motherboard
pcib0: <Host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1002 device=5a3f)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 5a62 graphics accelerator> at 5.0 irq 10
pcib2: <PCI to PCI bridge (vendor=1002 device=5a36)> at device 4.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x14e4, dev=0x4312) at 0.0 irq 10
pcib3: <PCI to PCI bridge (vendor=1002 device=5a37)> at device 5.0 on pci0
pci5: <PCI bus> on pcib3
atapci0: <ATI IXP400 SATA150 controller> port 0x8400-0x840f,0x8410-
0x8413,0x8420-0x8427,0x8430-0x8433,0x8440-0x8447 irq 2 at device 18.0 on pci0
ata2: <ATA channel 0> on atapci0
ad4: 95396MB <FUJITSU MHV2100BH PL 00000029> at ata2-master SATA150
ata3: <ATA channel 1> on atapci0
ohci0: <ATI SB400 USB Controller> mem 0xc0504000-0xc0504fff irq 5 at device 
19.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <ATI SB400 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 4 ports with 4 removable, self powered
ohci1: <ATI SB400 USB Controller> mem 0xc0505000-0xc0505fff irq 5 at device 
19.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <ATI SB400 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 4 ports with 4 removable, self powered
pci0: <USB controller> at 19.2 irq 5
pci0: <unknown card> (vendor=0x1002, dev=0x4372) at 20.0
atapci1: <ATI IXP400 UDMA133 controller> port 0x8460-0x846f,0x376,0x170-
0x177,0x3f6,0x1f0-0x1f7 irq 9 at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
acd0: DVDR <TSSTcorpCD/DVDW TS-L632D/GAH1> at ata0-master UDMA33
ata1: <ATA channel 1> on atapci1
pci0: <unknown card> (vendor=0x1002, dev=0x437b) at 20.2 irq 9
isab0: <PCI to ISA bridge (vendor=1002 device=4377)> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <PCI to PCI bridge (vendor=1002 device=4371)> at device 20.4 on pci0
pci8: <PCI bus> on pcib4
fwohci0: vendor=1180, dev=832
fwohci0: <1394 Open Host Controller Interface> mem 0xc0200000-0xc02007ff irq 2 
at device 7.0 on pci8
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:60:b0:00:00:1e:fe:b6
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
fwe0: MAC address: 02:60:b0:1e:fe:b6
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci8: <unknown card> (vendor=0x1180, dev=0x0822) at 7.1 irq 10
pci8: <unknown card> (vendor=0x1180, dev=0x0843) at 7.2 irq 10
pci8: <unknown card> (vendor=0x1180, dev=0x0592) at 7.3 irq 10
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xc0201400-0xc02014ff 
irq 11 at device 8.0 on pci8
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: MAC address: 00:19:bb:00:95:5d
orm0: <Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff,0xdf000-0xdffff on 
isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
Mounting root from ufs:/dev/ad4s1a
cd0 at ata2 bus 0 target 0 lun 0
cd0: <TSSTcorp CD/DVDW TS-L632D GAH1> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray 
closed
cpu0: Performance states changed
cpu0: Cx states changed



-- 
You have received this notification because you have either subscribed to it, or are involved in it.
To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account

More information about the Bugs mailing list