[DragonFlyBSD - Bug #2781] (Resolved) DFly 4.0.3; PC Engines APU AMD T40E CPU; kernel panic when when setting machdep.mwait.CX.idle=AUTO

[bugtracker-admin at leaf.dragonflybsd.org]

Issue #2781 has been updated by CosmicDJ.

Status changed from New to Resolved
% Done changed from 0 to 100

swildner wrote:
> Can you retry with current master perhaps? A fix was committed in http://gitweb.dragonflybsd.org/dragonfly.git/commitdiff/52945ec6bad2c5a73addf283dcdf3a286b0d2cb9
> 
> If you need it on the 4.0 branch, we could MFC it too I guess (or you can cherry-pick it locally).

No panic anymore:

# sysctl machdep.mwait.CX.idle=AUTO
machdep.mwait.CX.idle: NONE
sysctl: machdep.mwait.CX.idle=AUTO: value is not available

Thanks.

----------------------------------------
Bug #2781: DFly 4.0.3; PC Engines APU AMD T40E CPU; kernel panic when when setting machdep.mwait.CX.idle=AUTO
http://bugs.dragonflybsd.org/issues/2781#change-12575

* Author: CosmicDJ
* Status: Resolved
* Priority: Low
* Assignee: 
* Category: Kernel
* Target version: 4.0.x
----------------------------------------
Hi,

I get a kernel panic when doing "sysctl machdep.mwait.CX.idle=AUTO" (AUTODEEP does not work):

# sysctl machdep.mwait.CX.idle=AUTO
machdep.mwait.CX.idle: INVALID

Fatal trap 12: page fault while in kernel mode
cpuid = 1; lapic->id = 01000000
fault virtual address   = 0x3fffffff4
fault code              = supervisor read data, page not present
instruction pointer     = 0x8:0xffffffff809ccc6e
stack pointer           = 0x10:0xffffffe02b458a80
frame pointer           = 0x10:0xffffffe02b458ab0
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = Idle
current thread          = pri 12
kernel: type 12 trap, code=0

CPU1 stopping CPUs: 0x00000001
 stopped
Stopped at      cpu_idle+0x19a: movl    (%rdx,%rax,4),%edx

The CPU should support C1 and C6 (see http://www.cpu-world.com/CPUs/Bobcat/AMD-G%20Series%20G-T40E%20-%20GET40EFQB22GVE.html).
BIOS is "Build 9/8/2014".

/boot/loader.conf:
boot_serial="YES"
sio0.baud="115200"
console="comconsole"
#powernow_load="YES" # XXX does not work with a T40E CPU (yet?)
amdsbwd_load="YES"
km_load="YES"

/etc/sysctl.conf:
kern.rand_mode=csprng
kern.ipc.somaxconn=1024
#machdep.mwait.CX.idle=AUTODEEP XXX

Some sysctls:
# sysctl kern.cputimer
kern.cputimer.intr.select: lapic
kern.cputimer.intr.freq: 100000264
kern.cputimer.intr.reglist: lapic
kern.cputimer.freq: 14318180
kern.cputimer.clock: 754746750
kern.cputimer.name: HPET
kern.cputimer.select: HPET ACPI-safe i8254_timer2 dummy

# sysctl machdep.mwait
machdep.mwait.CX.repeat_shift: 1
machdep.mwait.CX.spin: INVALID
machdep.mwait.CX.idle: INVALID
machdep.mwait.CX.supported: 
machdep.mwait.C0.subcnt: 0
machdep.mwait.C0.entered: 0
machdep.mwait.C1.subcnt: 0
machdep.mwait.C1.entered: 47478
machdep.mwait.C2.subcnt: 0
machdep.mwait.C2.entered: 0
machdep.mwait.C3.subcnt: 0
machdep.mwait.C3.entered: 0
machdep.mwait.C4.subcnt: 0
machdep.mwait.C4.entered: 0
machdep.mwait.C5.subcnt: 0
machdep.mwait.C5.entered: 0
machdep.mwait.C6.subcnt: 0
machdep.mwait.C6.entered: 0
machdep.mwait.C7.subcnt: 0
machdep.mwait.C7.entered: 0

# sysctl hw.acpi | grep cx
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu.cx_lowest_use: C1
hw.acpi.cpu0.cx_supported: C1/100
hw.acpi.cpu0.cx_lowest: C1
hw.acpi.cpu0.cx_lowest_use: C1
hw.acpi.cpu0.cx_usage: 0.00% last 1000000us
hw.acpi.cpu1.cx_supported: C1/100
hw.acpi.cpu1.cx_lowest: C1
hw.acpi.cpu1.cx_lowest_use: C1
hw.acpi.cpu1.cx_usage: 0.00% last 1000000us

# sysctl hw.acpi.cpu | grep px
hw.acpi.cpu.px_dom0.available: 1000 800
hw.acpi.cpu.px_dom0.members: cpu1(800) cpu0(800)
hw.acpi.cpu.px_dom0.select: 800
hw.acpi.cpu.px_global: 1000

dmesg is attached

---Files--------------------------------
dmesg.txt (10.7 KB)
dmesg_verbose.txt (61.9 KB)


-- 
You have received this notification because you have either subscribed to it, or are involved in it.
To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account