[DragonFlyBSD - Bug #2232] (Closed) acpi - system cannot reboot or power down - 2.13.0.336.gacd31-DEVELOPMENT

[bugtracker-admin at leaf.dragonflybsd.org]

Issue #2232 has been updated by swildner.

Description updated
Status changed from New to Closed

Closing, duplicate of #2167

----------------------------------------
Bug #2232: acpi - system cannot reboot or power down - 2.13.0.336.gacd31-DEVELOPMENT
http://bugs.dragonflybsd.org/issues/2232#change-12033

* Author: ak
* Status: Closed
* Priority: Normal
* Assignee: 
* Category: 
* Target version: 
----------------------------------------
Versions:

Workstation: Lenovo Thinkcentre M58p
DragonFlyBSD: v2.13.0.336.gacd31-DEVELOPMENT X86_64_GENERIC  x86_64

#########

Problem Overview:

My system cannot reboot or power down using ACPI. It stops after the following:
Syncing disks…
done
Uptime: 11m24s

I've tried with the commands:
shutdown -p now 
shutdown -r now
reboot

power down and reboot work okay with FreeBSD 9.0 RC1 

#########

ACPI info from sysctl:

hw.acpi.power_button_state: S5

dfbsdp# sysctl -a | grep -i acpi
kern.cputimer.select: HPET ACPI-safe24 i8254_timer2 dummy
debug.acpi.level: NONE
debug.acpi.layer: NONE
debug.acpi.suspend_bounce: 0
debug.acpi.do_powerstate: 1
debug.acpi.acpi_ca_version: 20110211
debug.acpi.ec.timeout: 750
debug.acpi.ec.polled: 0
debug.acpi.ec.burst: 0
debug.acpi.semaphore_debug: 0
hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S3
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 1
hw.acpi.disable_on_reboot: 0
hw.acpi.handle_reboot: 1
hw.acpi.reset_video: 1
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu0.cx_supported: C1/1 C2/1
hw.acpi.cpu0.cx_lowest: C1
hw.acpi.cpu0.cx_usage: 100.00% 0.00% last 5000us
machdep.acpi_timer_freq: 3579545
machdep.acpi_root: 1009904


#########

dfbsdp# acpiconf -s S5
acpiconf: invalid sleep type (5)

#########

# acpidump -dt > out.asl

Output from "iasl out.asl":

your.asl   1264:         Method (WQA0, 1, NotSerialized)
Warning  1088 -                     ^ Not all control paths return a value (WQA0)

your.asl   2122:                         And (CAPB, 0xFFFFFFFC)
Warning  1106 -                                  ^ Result is not used, operator has no effect

your.asl   2123:                         Or (CAPB, 0x00)
Warning  1106 -                                 ^ Result is not used, operator has no effect

your.asl   2290:                 DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
Error    4123 -                                              ^ Min/Max/Length/Gran are all zero, but no resource tag

your.asl   2926:             Name (NATA, Package (0x03)
Remark   5048 -                                      ^ Initializer list shorter than declared package length

your.asl   3386:                             Or (0x03, PARM)
Warning  1106 -                                     ^ Result is not used, operator has no effect

your.asl   9648:     Method (_WAK, 1, NotSerialized)
Warning  1081 -                 ^ Reserved method must return a value (Integer/Package required for _WAK)

ASL Input:  your.asl - 11164 lines, 411038 bytes, 4585 keywords
Compilation complete. 1 Errors, 5 Warnings, 1 Remarks, 1259 Optimizations

#########

Followed the debug instructions for acpi in http://www.dragonflybsd.org/docs/handbook/handbook-acpi-debug/ but cannot set the debug layers/levels

# cd /sys/dev/acpica5 && make clean && make ACPI_DEBUG=1
# mv acpi.ko /boot/kernel

Adding the below to /boot/loader.conf causes a crash during boot. The error is "Fail trap 12: page fail while in kernel mode" and then enters DD:

debug.acpi.layer="ACPI_ALL_COMPONENTS ACPI_ALL_DRIVERS"
debug.acpi.level="ACPI_LV_ERROR"

Adding those options using sysctl causes the system to hang (although I can turn on and off num lock on the keyboard in this state)

#########

Attached dmesg and messages after verbose boot

---Files--------------------------------
dmesg-after-boot (106 KB)
messages (173 KB)


-- 
You have received this notification because you have either subscribed to it, or are involved in it.
To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account