[issue1158] Problems with a SATA DVD burner

[Hasso Tepper]

Vincent Stemen wrote:
>    acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
>    acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00

These are debug messages and can be ignored. I left this in to get more 
info about storms/locks Steve and me is seeing. Especially cdrecord and 
friends are testing many commands on drives and some of them just fail 
because drive doesn't support them. I'll switch this back of once we have 
issues resolved. 

>   atapci0: <SiI 3512 SATA150 controller> port
> 0xd400-0xd40f,0xd480-0xd483,0xd800-0 xd807,0xd880-0xd883,0xdc00-0xdc07
> mem 0xff8ffc00-0xff8ffdff irq 10 at device 0.0 on pci1
>    ata2: <ATA channel 0> on atapci0
>    intr 10 at 40001/40000 hz, livelocked limit engaged!
>    intr 10 at 0/20000 hz, livelock removed
>    acd0: DVDR <TSSTcorp DVD+/-RW TS-H653A/D400> at ata2-master SATA150
>    ata3: <ATA channel 1> on atapci0
>
> Which all seem to have been generated at boot time.  Notice there was
> one pair of livelock limit messages, but that was it.

Yeah, seems that it was able to restore. Good.

> This is the first time we have even been able to boot up a machine on
> Dragonfly with a SATA optical drive.  So this is a big step in the
> right direction :-). I hope this information helps.

Many thanks to you for testing! ;)


-- 
Hasso Tepper