[issue1159] fdisk: If no partition table, partition 4 is a whole-disk DragonFly partition? (plus bonus bug)
Joe "Floid" Kanowitz
sinknull at crater.dragonflybsd.org
Sun Nov 2 23:19:13 PST 2008
New submission from Joe "Floid" Kanowitz <jkanowitz at snet.net>:
Hi all. I decided to do a fresh install today, and discovered possible quirks
with fdisk, and also head on ad devices, using the Nov 2 snapshot CD
(2.1.0-DEVELOPMENT, Sun Nov 2 00:57 CET 2008).
As part of this adventure, I installed a new-in-box PATA disk, booted from the
install CD, and for curiosity ran fdisk against it. fdisk properly complains
that the partition table is invalid (the disk should be blank) but to my
surprise then states that partition 4 is a type 165 Free/Net/DragonFly partition
spanning the entire disk.
Just to make sure the disk was blank, I tried a quick "head /dev/ad0 | hd" and
was surprised to find that it hangs. A "cat /dev/ad0" will fill the screen with
nuls until terminated, as expected. A ktrace of head piped through stdout shows
that it's reading data but eventually appears to hang in GIO after the last read
attempt. (I have nowhere to throw the dump output right now, but it should be
easily reproducible later if it's of interest.)
* I'm seeing no problem with fdisk against disks that actually have tables, this
is just potentially-confusing output when confronted with one that doesn't.
* If `head adN` is not expected to behave that way and this can't be reproduced
elsewhere, I'm still using the same board with an ATI SB600 for the ATA controllers.
* The Maxtor disk is a "DiamondMax 10."
* head works against the (formatted, partitioned) Western Digital drive I'd been
using with 2.0 (tested under 2.0 and this 2.1 CD) with no problems. Strange!
Perhaps the Maxtor has a firmware bug? Or perhaps all will be well after I
actually write something to it?
I originally had the Maxtor hooked up with a generic PATA-to-SATA adapter, but
moved it to a plain PATA connection to confirm before running the ktrace. The
adapter obviously was not the culprit, but did inspire me to take a look,
because it has a bus activity LED and I noticed it was thrumming softly
when head otherwise appeared hung.
Of course, I removed it and went to a normal PATA connection before trying the
ktrace, but the experience with the adapter's LED would seem to indicate there's
constant bus activity even *after* head reaches the read attempt that never
seems to complete.
-Keeping it confusing,
title: fdisk: If no partition table, partition 4 is a whole-disk DragonFly partition? (plus bonus bug)
DragonFly issue tracker <bugs at lists.dragonflybsd.org>
More information about the Bugs