[issue1116] HAMMER:file read speed
lhmwzy
lhmwzy at gmail.com
Mon Aug 11 19:10:31 PDT 2008
dmesg:
Copyright (c) 2003-2008 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 2.0.0-RELEASE #0: Thu Aug 7 10:16:03 CST 2008
lhm at hummer.org:/usr/obj/www/src/sys/LHMWZY
TSC clock: 2127890488 Hz, i8254 clock: 1193193 Hz
CPU: Intel(R) Xeon(R) CPU E7320 @ 2.13GHz (2127.48-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f8 Stepping = 8
Features=0xfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS>
Features2=0x2211<SSE3,DS_CPL,SSSE3,CX16>
real memory = 1073741824 (1048576K bytes)
avail memory = 1034481664 (1010236K bytes)
Preloaded elf kernel "/kernel" at 0xc0404000.
Preloaded elf module "/modules/acpi.ko" at 0xc0404288.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdf30
ACPI: RSDP @ 0x0xf6c60/0x0014 (v 0 PTLTD )
ACPI: RSDT @ 0x0x3fefab68/0x0030 (v 1 PTLTD RSDT 0x06040000 LTP
0x00000000)
ACPI: FACP @ 0x0x3fefef14/0x0074 (v 1 INTEL 440BX 0x06040000 PTL
0x000F4240)
ACPI: DSDT @ 0x0x3fefab98/0x437C (v 1 PTLTD Custom 0x06040000 MSFT
0x0100000D)
ACPI: FACS @ 0x0x3fefffc0/0x0040
ACPI: APIC @ 0x0x3fefef88/0x0050 (v 1 PTLTD APIC 0x06040000 LTP
0x00000000)
ACPI: BOOT @ 0x0x3fefefd8/0x0028 (v 1 PTLTD $SBFTBL$ 0x06040000 LTP
0x00000001)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_acad0: <AC Adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
isab0: <ACPI Generic ISA bridge> on acpi0
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
legacypci0 on motherboard
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab1: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab1
pci0: <Intel PIIX4 ATA controller> at 7.1
pci0: <Intel 82371AB Power management controller> at 7.3
pci0: <VGA-compatible display device> at 15.0
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x1080-0x10ff mem
0xf4800000-0xf4800fff irq 9 at device 16.0 on pci0
lnc0: <AMD PCnet-PCI> port 0x1400-0x147f irq 11 at device 17.0 on pci0
lnc0: 16 receive buffers, 4 transmit buffers
lnc0: MAC address: 00:50:56:98:50:54
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xca000-0xcafff,0xdc000-0xdffff,0xe0000-0xe3fff on
isa0
pmtimer0 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
ppc1: cannot reserve I/O port range
Waiting 5 seconds for SCSI devices to settle
da0 at mpt0 bus 0 target 0 lun 0
da0: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device
da0: 3.300MB/s transfers (3.300MHz DT, offset -765769400)
da0: 40960MB (83886080 512 byte sectors: 255H 63S/T 5221C)
da1 at mpt0 bus 0 target 1 lun 0
da1: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device
da1: 3.300MB/s transfers (3.300MHz DT, offset -765769400)
da1: 8192MB (16777216 512 byte sectors: 255H 63S/T 1044C)
da2 at mpt0 bus 0 target 2 lun 0
da2: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device
da2: 3.300MB/s transfers (3.300MHz DT, offset -765769400)
da2: 15360MB (31457280 512 byte sectors: 255H 63S/T 1958C)
Mounting root from ufs:/dev/da0s1a
Waiting (max 60 seconds) for system thread vnlru to stop...stopped
Waiting (max 60 seconds) for system thread bufdaemon_hw to stop...stopped
Waiting (max 60 seconds) for system thread bufdaemon to stop...stopped
Waiting (max 60 seconds) for system thread syncer to stop...stopped
syncing disks... 7
done
Uptime: 18m53s
Shutting down ACPI
Rebooting...
Copyright (c) 2003-2008 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 2.0-RELEASE #0: Mon Aug 11 14:15:12 CST 2008
lhm at hummer.org:/usr/obj/www/src/sys/LHMWZY
TSC clock: 2127853808 Hz, i8254 clock: 1193173 Hz
CPU: Intel(R) Xeon(R) CPU E7320 @ 2.13GHz (2127.49-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f8 Stepping = 8
Features=0xfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS>
Features2=0x2211<SSE3,DS_CPL,SSSE3,CX16>
real memory = 1073741824 (1048576K bytes)
avail memory = 1034481664 (1010236K bytes)
Preloaded elf kernel "/kernel" at 0xc0404000.
Preloaded elf module "/modules/acpi.ko" at 0xc0404288.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdf30
ACPI: RSDP @ 0x0xf6c60/0x0014 (v 0 PTLTD )
ACPI: RSDT @ 0x0x3fefab68/0x0030 (v 1 PTLTD RSDT 0x06040000 LTP
0x00000000)
ACPI: FACP @ 0x0x3fefef14/0x0074 (v 1 INTEL 440BX 0x06040000 PTL
0x000F4240)
ACPI: DSDT @ 0x0x3fefab98/0x437C (v 1 PTLTD Custom 0x06040000 MSFT
0x0100000D)
ACPI: FACS @ 0x0x3fefffc0/0x0040
ACPI: APIC @ 0x0x3fefef88/0x0050 (v 1 PTLTD APIC 0x06040000 LTP
0x00000000)
ACPI: BOOT @ 0x0x3fefefd8/0x0028 (v 1 PTLTD $SBFTBL$ 0x06040000 LTP
0x00000001)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_acad0: <AC Adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
isab0: <ACPI Generic ISA bridge> on acpi0
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
legacypci0 on motherboard
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab1: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab1
pci0: <Intel PIIX4 ATA controller> at 7.1
pci0: <Intel 82371AB Power management controller> at 7.3
pci0: <VGA-compatible display device> at 15.0
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x1080-0x10ff mem
0xf4800000-0xf4800fff irq 9 at device 16.0 on pci0
lnc0: <AMD PCnet-PCI> port 0x1400-0x147f irq 11 at device 17.0 on pci0
lnc0: 16 receive buffers, 4 transmit buffers
lnc0: MAC address: 00:50:56:98:50:54
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xca000-0xcafff,0xdc000-0xdffff,0xe0000-0xe3fff on
isa0
pmtimer0 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
ppc1: cannot reserve I/O port range
Waiting 5 seconds for SCSI devices to settle
da0 at mpt0 bus 0 target 0 lun 0
da0: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device
da0: 3.300MB/s transfers (3.300MHz DT, offset -765769400)
da0: 40960MB (83886080 512 byte sectors: 255H 63S/T 5221C)
da1 at mpt0 bus 0 target 1 lun 0
da1: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device
da1: 3.300MB/s transfers (3.300MHz DT, offset -765769400)
da1: 8192MB (16777216 512 byte sectors: 255H 63S/T 1044C)
da2 at mpt0 bus 0 target 2 lun 0
da2: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device
da2: 3.300MB/s transfers (3.300MHz DT, offset -765769400)
da2: 15360MB (31457280 512 byte sectors: 255H 63S/T 1958C)
Mounting root from ufs:/dev/da0s1a
2008/8/12 Sepherosa Ziehau <bugs at lists.dragonflybsd.org>:
>
> Sepherosa Ziehau <sepherosa at gmail.com> added the comment:
>
> On Tue, Aug 12, 2008 at 7:54 AM, lhmwzy
> <sinknull at crater.dragonflybsd.org> wrote:
>>
>> lhmwzy <lhmwzy at gmail.com> added the comment:
>>
>> All the same if FreeBSD,the transfer speed is 11Mb/s
>> Maybe the difference reason is Ethernet driver difference of FB and DF?
>
> Output of dmesg and ifconfig on both client and server. And which
> NICs are used to do the ftp testing. BTW, could you use netperf or
> iperf to do some simple TCP stream tests?
>
> Best Regards,
> sephe
>
> _____________________________________________________
> DragonFly issue tracker <bugs at lists.dragonflybsd.org>
> <https://bugs.dragonflybsd.org/issue1116>
> _____________________________________________________
>
More information about the Bugs
mailing list