system freeze on "slice too large"
Simon 'corecode' Schubert
corecode at fs.ei.tum.de
Sun Jul 15 06:08:25 PDT 2007
hey,
i've now had twice a nasty freeze (kind of) with something like this (hand transcribed):
dscheck(#ad/0x20021): slice too large 2/2
. .
then vinum tells me that it put "build" down and continues:
fatal: build.p0.s0 read error, offset 33831591936 for 4096 bytes
build.p0.s0: user buffer offset 10209280000 for 4096 bytes
(more slice too large follow)
then, the namecache does
blocked on 0xd4fb7b58 "corecode"
and repeats it every 30 seconds or so. system is unoperable at this point.
breaking to the debugger works, but dumpsys does not work:
dumping to dev #ad/0x20023, blockno 2130432
dump failed, reason: area improper
i'm running:
DragonFly sweatshorts.home.corecode.ath.cx 1.9.0-DEVELOPMENT DragonFly 1.9.0-DEVELOPMENT #14: Sun Jun 17 11:03:58 CEST 2007 corecode at sweatshorts.home.corecode.ath.cx:/usr/build/obj/usr/build/src/sys/SWEATSHORTS i386
i've attached relevant outputs.
thanks,
simon
--
Serve - BSD +++ RENT this banner advert +++ ASCII Ribbon /"\
Work - Mac +++ space for low €€€ NOW!1 +++ Campaign \ /
Party Enjoy Relax | http://dragonflybsd.org Against HTML \
Dude 2c 2 the max ! http://golden-apple.biz Mail + News / \
# /dev/ad2s1:
type: unknown
disk: amnesiac
label:
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 256
sectors/cylinder: 16128
cylinders: 19380
sectors/unit: 312576705
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # milliseconds
track-to-track seek: 0 # milliseconds
drivedata: 0
16 partitions:
# size offset fstype
a: 2096871 281 4.2BSD # 1023.863M
b: 312576689 16 vinum # 152625.336M
c: 312576705 0 unused # 152625.344M
# /dev/ad4s1:
type: unknown
disk: amnesiac
label:
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 15
sectors/cylinder: 945
cylinders: 516821
sectors/unit: 488396727
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # milliseconds
track-to-track seek: 0 # milliseconds
drivedata: 0
16 partitions:
# size offset fstype
a: 2096871 281 4.2BSD # 1023.863M
b: 488396711 16 vinum # 238474.957M
c: 488396727 0 unused # 238474.964M
d: 4194304 339738624 swap # 2048.000M
******* Working on device /dev/ad2 *******
parameters extracted from device are:
cylinders=19381 heads=256 sectors/track=63 (16128 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=19381 heads=256 sectors/track=63 (16128 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165,(DragonFly/FreeBSD/NetBSD/386BSD)
start 63, size 312576705 (152625 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 1023/ head 255/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
******* Working on device /dev/ad4 *******
parameters extracted from device are:
cylinders=516822 heads=15 sectors/track=63 (945 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=516822 heads=15 sectors/track=63 (945 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165,(DragonFly/FreeBSD/NetBSD/386BSD)
start 63, size 488396727 (238474 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 725/ head 14/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
2 drives:
D samsung250 State: up Device /dev/ad4s1b Avail: 0/238474 MB (0%)
D samsung160 State: up Device /dev/ad2s1b Avail: 0/152625 MB (0%)
11 volumes:
V root State: up Plexes: 2 Size: 1023 MB
V repos State: up Plexes: 1 Size: 20 GB
V build State: up Plexes: 1 Size: 20 GB
V pkg State: up Plexes: 1 Size: 20 GB
V media State: up Plexes: 1 Size: 255 GB
V home State: up Plexes: 2 Size: 20 GB
V var State: up Plexes: 1 Size: 1024 MB
V swap State: up Plexes: 1 Size: 2048 MB
V usr State: up Plexes: 1 Size: 7168 MB
V space State: up Plexes: 1 Size: 10 GB
V tmp State: up Plexes: 1 Size: 4095 MB
13 plexes:
P root.p0 C State: up Subdisks: 1 Size: 1023 MB
P repos.p0 C State: up Subdisks: 1 Size: 20 GB
P build.p0 C State: up Subdisks: 1 Size: 20 GB
P pkg.p0 C State: up Subdisks: 1 Size: 20 GB
P media.p0 C State: up Subdisks: 4 Size: 255 GB
P home.p0 C State: up Subdisks: 1 Size: 20 GB
P var.p0 C State: up Subdisks: 1 Size: 1024 MB
P swap.p0 C State: up Subdisks: 1 Size: 2048 MB
P usr.p0 C State: up Subdisks: 1 Size: 7168 MB
P space.p0 C State: up Subdisks: 1 Size: 10 GB
P root.p1 C State: up Subdisks: 1 Size: 1023 MB
P home.p1 C State: up Subdisks: 1 Size: 20 GB
P tmp.p0 S State: up Subdisks: 2 Size: 4095 MB
17 subdisks:
S root.p0.s0 State: up PO: 0 B Size: 1023 MB
S repos.p0.s0 State: up PO: 0 B Size: 20 GB
S build.p0.s0 State: up PO: 0 B Size: 20 GB
S pkg.p0.s0 State: up PO: 0 B Size: 20 GB
S media.p0.s0 State: up PO: 0 B Size: 100 GB
S home.p0.s0 State: up PO: 0 B Size: 20 GB
S var.p0.s0 State: up PO: 0 B Size: 1024 MB
S swap.p0.s0 State: up PO: 0 B Size: 2048 MB
S usr.p0.s0 State: up PO: 0 B Size: 7168 MB
S space.p0.s0 State: up PO: 0 B Size: 10 GB
S root.p1.s0 State: up PO: 0 B Size: 1023 MB
S home.p1.s0 State: up PO: 0 B Size: 20 GB
S media.p0.s1 State: up PO: 100 GB Size: 100 GB
S tmp.p0.s0 State: up PO: 0 B Size: 2047 MB
S tmp.p0.s1 State: up PO: 300 kB Size: 2047 MB
S media.p0.s2 State: up PO: 200 GB Size: 29 GB
S media.p0.s3 State: up PO: 229 GB Size: 26 GB
More information about the Bugs
mailing list