page fault on 1.2.0-RELEASE
George Georgalis
george at galis.org
Tue Jun 14 11:41:45 PDT 2005
On Sun, Jun 12, 2005 at 03:00:52PM -0700, Chuck Tuffli wrote:
>I'm trying to install 1.2.0-RELEASE on a new x86 system (4-way Xeon
>based machine) but am getting a page fault very early during the boot
>of the kernel. Below is the output via comconsole with
>boot_verbose=yes (also, any idea why trace is showing (null) instead
>of the stack entries?).
I'm not sure if my problem is related. The 1.2.0-RELEASE installs
without a hitch. (I have a root ssh shell from the iso now.) However,
I cannot fully load the kernel: BTX.. crash.
I'm guessing something with serial port, because the the few lines of
hex dump is on alternate columns and the entire display becomes completely
unintelligible.
I don't have a browser to lookup/provide complete specs, but it is a
relion 130, from penguincomputing.com, a dual p4, Intel chipset I think.
I have no serial cables here... it is curious that the cd boots fine and
installs, but the installed system won't boot. I tried disabling packet
mode on the bootloader, no change.
If there is something to try, while I'm here on site, that would be
great! Hope to compare performance with a linux install. DFly does
support smp... Is that in Release?
Some info, anything else I can provide?
+ pciconf -l
+ pciconf -lv
+ dmesg
hostb0 at pci0:0:0: class=0x060000 card=0x00000000 chip=0x254c8086 rev=0x01 hdr=0x00
pcib1 at pci0:2:0: class=0x060400 card=0x00000000 chip=0x25438086 rev=0x01 hdr=0x01
pcib4 at pci0:3:0: class=0x060400 card=0x00000000 chip=0x25458086 rev=0x01 hdr=0x01
uhci0 at pci0:29:0: class=0x0c0300 card=0x24808086 chip=0x24828086 rev=0x02 hdr=0x00
pcib7 at pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x42 hdr=0x01
isab0 at pci0:31:0: class=0x060100 card=0x00000000 chip=0x24808086 rev=0x02 hdr=0x00
atapci0 at pci0:31:1: class=0x01018a card=0x24808086 chip=0x248b8086 rev=0x02 hdr=0x00
none0 at pci0:31:3: class=0x0c0500 card=0x24808086 chip=0x24838086 rev=0x02 hdr=0x00
none1 at pci5:28:0: class=0x080020 card=0x14618086 chip=0x14618086 rev=0x04 hdr=0x00
pcib2 at pci5:29:0: class=0x060400 card=0x00000050 chip=0x14608086 rev=0x04 hdr=0x01
none2 at pci5:30:0: class=0x080020 card=0x14618086 chip=0x14618086 rev=0x04 hdr=0x00
pcib3 at pci5:31:0: class=0x060400 card=0x00000050 chip=0x14608086 rev=0x04 hdr=0x01
em0 at pci7:1:0: class=0x020000 card=0x10118086 chip=0x10108086 rev=0x01 hdr=0x00
em1 at pci7:1:1: class=0x020000 card=0x10118086 chip=0x10108086 rev=0x01 hdr=0x00
none3 at pci2:28:0: class=0x080020 card=0x14618086 chip=0x14618086 rev=0x04 hdr=0x00
pcib5 at pci2:29:0: class=0x060400 card=0x00000050 chip=0x14608086 rev=0x04 hdr=0x01
none4 at pci2:30:0: class=0x080020 card=0x14618086 chip=0x14618086 rev=0x04 hdr=0x00
pcib6 at pci2:31:0: class=0x060400 card=0x00000050 chip=0x14608086 rev=0x04 hdr=0x01
fxp0 at pci1:1:0: class=0x020000 card=0x10408086 chip=0x12298086 rev=0x10 hdr=0x00
none5 at pci1:2:0: class=0x030000 card=0x80081002 chip=0x47521002 rev=0x27 hdr=0x00
hostb0 at pci0:0:0: class=0x060000 card=0x00000000 chip=0x254c8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = 'E7501 Host Controller'
class = bridge
subclass = HOST-PCI
pcib1 at pci0:2:0: class=0x060400 card=0x00000000 chip=0x25438086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = 'E7500/E7501 HI_B Virtual PCI-to-PCI Bridge'
class = bridge
subclass = PCI-PCI
pcib4 at pci0:3:0: class=0x060400 card=0x00000000 chip=0x25458086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = 'E7500/E7501 HI_C Virtual PCI-to-PCI Bridge'
class = bridge
subclass = PCI-PCI
uhci0 at pci0:29:0: class=0x0c0300 card=0x24808086 chip=0x24828086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #1'
class = serial bus
subclass = USB
pcib7 at pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x42 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BA/CA/DB (ICH2/3/4) Hub Interface to PCI Bridge (244E)'
class = bridge
subclass = PCI-PCI
isab0 at pci0:31:0: class=0x060100 card=0x00000000 chip=0x24808086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) LPC Interface'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:31:1: class=0x01018a card=0x24808086 chip=0x248b8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA (ICH3) UltraATA/100 EIDE Controller'
class = mass storage
subclass = ATA
none0 at pci0:31:3: class=0x0c0500 card=0x24808086 chip=0x24838086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) SMBus Controller'
class = serial bus
subclass = SMBus
none1 at pci5:28:0: class=0x080020 card=0x14618086 chip=0x14618086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82870P2 I/OxAPIC Interrupt Controller'
class = base peripheral
subclass = interrupt controller
pcib2 at pci5:29:0: class=0x060400 card=0x00000050 chip=0x14608086 rev=0x04 hdr=0x01
vendor = 'Intel Corporation'
device = '82870P2 P64H2 PCI/PCI-X Hub Controller'
class = bridge
subclass = PCI-PCI
none2 at pci5:30:0: class=0x080020 card=0x14618086 chip=0x14618086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82870P2 I/OxAPIC Interrupt Controller'
class = base peripheral
subclass = interrupt controller
pcib3 at pci5:31:0: class=0x060400 card=0x00000050 chip=0x14608086 rev=0x04 hdr=0x01
vendor = 'Intel Corporation'
device = '82870P2 P64H2 PCI/PCI-X Hub Controller'
class = bridge
subclass = PCI-PCI
em0 at pci7:1:0: class=0x020000 card=0x10118086 chip=0x10108086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82546EB Gigabit Ethernet Controller (copper)'
class = network
subclass = ethernet
em1 at pci7:1:1: class=0x020000 card=0x10118086 chip=0x10108086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82546EB Gigabit Ethernet Controller (copper)'
class = network
subclass = ethernet
none3 at pci2:28:0: class=0x080020 card=0x14618086 chip=0x14618086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82870P2 I/OxAPIC Interrupt Controller'
class = base peripheral
subclass = interrupt controller
pcib5 at pci2:29:0: class=0x060400 card=0x00000050 chip=0x14608086 rev=0x04 hdr=0x01
vendor = 'Intel Corporation'
device = '82870P2 P64H2 PCI/PCI-X Hub Controller'
class = bridge
subclass = PCI-PCI
none4 at pci2:30:0: class=0x080020 card=0x14618086 chip=0x14618086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82870P2 I/OxAPIC Interrupt Controller'
class = base peripheral
subclass = interrupt controller
pcib6 at pci2:31:0: class=0x060400 card=0x00000050 chip=0x14608086 rev=0x04 hdr=0x01
vendor = 'Intel Corporation'
device = '82870P2 P64H2 PCI/PCI-X Hub Controller'
class = bridge
subclass = PCI-PCI
fxp0 at pci1:1:0: class=0x020000 card=0x10408086 chip=0x12298086 rev=0x10 hdr=0x00
vendor = 'Intel Corporation'
device = '82557/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
none5 at pci1:2:0: class=0x030000 card=0x80081002 chip=0x47521002 rev=0x27 hdr=0x00
vendor = 'ATI Technologies'
device = 'Rage XL PCI'
class = display
subclass = VGA
Copyright (c) 2003, 2004, 2005 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 1.2.0-RELEASE #0: Fri Apr 8 01:25:26 PDT 2005
root at xxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
TSC clock: 2798582020 Hz, i8254 clock: 1192917 Hz
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2799.22-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2147418112 (2097088K bytes)
avail memory = 2077011968 (2028332K bytes)
Preloaded elf kernel "/kernel" at 0xc0672000.
Preloaded elf module "/modules/acpi.ko" at 0xc0672244.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 13 entries at 0xc00f2fd0
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <A M I OEMRSDT> on motherboard
installed MI handler for int 9
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on pci0
pci5: <PCI bus> on pcib1
pci5: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci5
pci7: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xd880-0xd8bf mem 0xfe9c0000-0xfe9dffff irq 9 at device 1.0 on pci7
em0: MAC address: 00:e0:81:29:dc:6a
em0: Speed: N/A, Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xdc00-0xdc3f mem 0xfe9e0000-0xfe9fffff irq 9 at device 1.1 on pci7
em1: MAC address: 00:e0:81:29:dc:6b
em1: Speed: N/A, Duplex:N/A
pci5: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci5
pci6: <PCI bus> on pcib3
pcib4: <PCI to PCI bridge (vendor=8086 device=2545)> at device 3.0 on pci0
pci2: <PCI bus> on pcib4
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib5: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci2
pci4: <PCI bus> on pcib5
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib6: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci2
pci3: <PCI bus> on pcib6
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xec00-0xec1f irq 9 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib7: <Intel 82801BA/CA/DB/EB/FB (ICH2/3/4/5/6) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib7
fxp0: <Intel 82551 Pro/100 Ethernet> port 0xac00-0xac3f mem 0xfe4a0000-0xfe4bffff,0xfe4fe000-0xfe4fefff irq 5 at device 1.0 on pci1
installed MI handler for int 5
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: MAC address: 00:e0:81:29:dc:1d
pci1: <ATI Mach64-GR graphics accelerator> at 2.0 irq 11
isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcafff,0xcb000-0xcc7ff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
installed MI handler for int 3
ppc0: parallel port not found.
installed MI handler for int 0
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 38166MB <ST340014A> [77545/16/63] at ata0-master UDMA100
acd0: CDROM <QSI CD-ROM SCR-242> at ata1-master PIO4
Mounting root from cd9660:cd0c
cd0 at ata1 bus 0 target 0 lun 0
cd0: <QSI CD-ROM SCR-242 CXAC> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: cd present [119398 x 2048 byte records]
em1: Link is up 1000 Mbps Full Duplex
Thanks,
// George
--
George Georgalis, systems architect, administrator Linux BSD IXOYE
http://galis.org/george/ cell:646-331-2027 mailto:george at xxxxxxxxx
More information about the Bugs
mailing list