load_quick_desc?
Yury Tarasievich
grog at grsu.by
Mon Jul 4 13:48:13 PDT 2005
Hiten Pandya wrote:
Yury Tarasievich wrote:
I've tried to move smbus into module - by adding makefile in manner
similar to other bus modules. It compiles, but when trying to load
the resulting module message on console says 'unable to find
load_quick_desc'.
What's that load_quick_desc thing? I can't find anything appropriate
like this or like _desc or like quick_ in source tree.
OK, the smbus and iicbus code is not supposed to be used as
stand-alone modules because it provides Newbus driver methods for
children objects. What this means, is that when you compile a children
module that makes use of smbus technology it will have code for smbus
compiled into it.
A good example of this is the 'bktr' driver which makes use of the
smbus and iicbus kobj methods.
To summarise we do not require to turn them into kernel modules
because it would be superfluous; unless you are trying to use smbus
technology in a way that is not standard.
Of course, I didn't know all this. What I was trying to achieve was to
make Yukon network adapter on those sharp new ich915 MB work. Each time
I'm trying to load network adapter module it's complaining on problems
in ichsmb: "can't map I/O". This happens with either built-in and
inserted network adapter. So I've figured I'll try "change-and-run"
technique with smbus as a module (miibus and its dependants, if_sk
included, were commented out of kernel config and were rused as modules
already).
I'm attaching dmesgs, just in case.
. ..aha, I can't send mime. In plain text, then.
--- verbose kldload
Jul 3 17:37:34 bas login: ROOT LOGIN (root) ON ttyv7
ichsmb0.pci0.pcib0.nexus0.root0
ichsmb0: <SMBus controller> [tentative] port 0x400-0x41f at device 31.3
on pci0
ichsmb0: can't map I/O
device_probe_and_attach: ichsmb0 attach returned 6
skc0.pci2.pcib3.pci0.pcib0.nexus0.root0
skc0: <Marvell Gigabit Ethernet Yukon 88E053> [tentative] port
0xc800-0xc8ff mem 0xcdefc000-0xcdefffff irq 3 at device 0.0 on pci2
pcib3: device skc0 requested decoded memory range 0xcdefc000-0xcdefffff
installed MI handler for int 3
skc0: bad VPD resource id: expected 82 got 0
skc0: (null)
skc0: <Marvell Gigabit Ethernet Yukon 88E053> [attached!] port
0xc800-0xc8ff mem 0xcdefc000-0xcdefffff irq 3 at device 0.0 on pci2
sk0.skc0.pci2.pcib3.pci0.pcib0.nexus0.root0
sk0: <Marvell Semiconductor, Inc. Yukon> [tentative] on skc0
skc0: no PHY found!
device_probe_and_attach: sk0 attach returned 6
sk1.skc0.pci2.pcib3.pci0.pcib0.nexus0.root0
sk1: <Marvell Semiconductor, Inc. Yukon> [tentative] on skc0
skc1: no PHY found!
device_probe_and_attach: sk1 attach returned 6
Jul 3 17:39:40 bas kernel: ichsmb0: can't map I/O
--- verbose dmesg.boot
16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <A M I OEMXSDT> on motherboard
installed MI handler for int 9
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=2581)> at device 1.0 on pci0
pci4: <PCI bus> on pcib1
pci4: <NVidia model 00fa graphics accelerator> at 0.0 irq 10
pci0: <unknown card> (vendor=0x8086, dev=0x2668) at 27.0 irq 10
pcib2: <PCI to PCI bridge (vendor=8086 device=2660)> at device 28.0 on pci0
pci3: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=8086 device=2662)> at device 28.1 on pci0
pci2: <PCI bus> on pcib3
pci2: <unknown card> (vendor=0x11ab, dev=0x4362) at 0.0 irq 3
pcib4: <Intel 82801BA/CA/DB/EB/FB (ICH2/3/4/5/6) Hub to PCI bridge> at
device 30.0 on pci0
pci1: <PCI bus> on pcib4
pci1: <unknown card> (vendor=0x10ec, dev=0x8029) at 10.0 irq 5
isab0: <Intel 82801FB/FBW (ICH6) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6R/RW ATA100 controller> port
0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
atapci1: <Intel ICH6R/RW SATA150 controller> port
0xa400-0xa40f,0xa480-0xa483,0xa800-0xa807,0xa880-0xa883,0xac00-0xac07
mem 0xcddffc00-0xcddfffff irq 11 at device 31.2 on pci0
ata2: at 0xac00 on atapci1
installed MI handler for int 11
ata3: at 0xa800 on atapci1
ichsmb0: <SMBus controller> port 0x400-0x41f at device 31.3 on pci0
device_probe_and_attach: ichsmb0 attach returned 6
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
installed MI handler for int 6
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1: can't drain, serial port might not exist, disabling
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
installed MI handler for int 7
installed MI handler for int 0
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad4: DMA limited to UDMA33, non-ATA66 cable or device
ad4: 114498MB <SAMSUNG SP1213C> [232632/16/63] at ata2-master UDMA33
acd0: DVD-R <_NEC DVD_RW ND-3500AG> at ata0-master PIO4
Mounting root from ufs:/dev/ad4s2a
cd0 at ata0 bus 0 target 0 lun 0
cd0: <_NEC DVD_RW ND-3500AG 2.16> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
ichsmb0: <SMBus controller> port 0x400-0x41f at device 31.3 on pci0
ichsmb0: can't map I/O
device_probe_and_attach: ichsmb0 attach returned 6
skc0: <Marvell Gigabit Ethernet Yukon 88E053> port 0xc800-0xc8ff mem
0xcdefc000-0xcdefffff irq 3 at device 0.0 on pci2
installed MI handler for int 3
skc0: bad VPD resource id: expected 82 got 0
skc0: (null)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
skc0: no PHY found!
device_probe_and_attach: sk0 attach returned 6
sk1: <Marvell Semiconductor, Inc. Yukon> on skc0
skc1: no PHY found!
device_probe_and_attach: sk1 attach returned 6
Waiting (max 60 seconds) for system thread vnlru to stop...stopped
Waiting (max 60 seconds) for system thread bufdaemon to stop...stopped
Waiting (max 60 seconds) for system thread syncer to stop...stopped
syncing disks...
done
Copyright (c) 2003, 2004, 2005 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 1.3.2-DEVELOPMENT #4: Fri Jul 1 02:11:23 EEST 2005
root at xxxxxxxxxxxxxxxx:/p3/f/build/dfbsd/obj/p3/f/build/dfbsd/src/sys/HERE-3
Calibrating clock(s) ... TSC clock: 3211395016 Hz, i8254 clock: 1193194 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3211.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf34 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1073414144 (1048256K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x006be000 - 0x3ffa7fff, 1066311680 bytes (260330 pages)
avail memory = 1032282112 (1008088K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x31
pnpbios: Found PnP BIOS data at 0xc00f8de0
pnpbios: Entry = f0000:9a1a Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "/kernel" at 0xc0691000.
Preloaded elf module "/modules/acpi.ko" at 0xc069121c.
Leaving critical section, allowing interrupts
crypto: <crypto core>
wlan: <802.11 Link Layer>
Pentium Pro MTRR support enabled
md0: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000094
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25808086)
pcibios: BIOS version 2.10
Using $PIR table, 18 entries at 0xc00f8c30
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 6 7 10 11 12 14 15
embedded 4 0 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 2 B 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 30 A 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 30 B 0x68 3 4 5 6 7 10 11 12 14 15
embedded 0 28 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 28 B 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 28 C 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 28 D 0x63 3 4 5 6 7 10 11 12 14 15
embedded 1 8 A 0x68 3 4 5 6 7 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 31 B 0x63 3 4 5 6 7 10 11 12 14 15
embedded 0 31 D 0x63 3 4 5 6 7 10 11 12 14 15
embedded 0 29 A 0x6b 3 4 5 6 7 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 6 7 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 29 D 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 27 A 0x60 3 4 5 6 7 10 11 12 14 15
slot 5 1 11 A 0x6a 3 4 5 6 7 10 11 12 14 15
slot 5 1 11 B 0x6b 3 4 5 6 7 10 11 12 14 15
slot 5 1 11 C 0x68 3 4 5 6 7 10 11 12 14 15
slot 5 1 11 D 0x69 3 4 5 6 7 10 11 12 14 15
slot 6 1 10 A 0x69 3 4 5 6 7 10 11 12 14 15
slot 6 1 10 B 0x6a 3 4 5 6 7 10 11 12 14 15
slot 6 1 10 C 0x6b 3 4 5 6 7 10 11 12 14 15
slot 6 1 10 D 0x68 3 4 5 6 7 10 11 12 14 15
slot 7 1 9 A 0x61 3 4 5 6 7 10 11 12 14 15
slot 7 1 9 B 0x62 3 4 5 6 7 10 11 12 14 15
slot 7 1 9 C 0x63 3 4 5 6 7 10 11 12 14 15
slot 7 1 9 D 0x60 3 4 5 6 7 10 11 12 14 15
embedded 2 0 A 0x61 3 4 5 6 7 10 11 12 14 15
slot 2 3 0 A 0x60 3 4 5 6 7 10 11 12 14 15
slot 3 255 0 A 0x62 3 4 5 6 7 10 11 12 14 15
slot 1 255 0 A 0x63 3 4 5 6 7 10 11 12 14 15
embedded 1 3 A 0x68 3 4 5 6 7 10 11 12 14 15
embedded 1 4 A 0x69 3 4 5 6 7 10 11 12 14 15
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
npx0: <math processor> [attached!] on motherboard
acpi0.nexus0.root0
acpi0: <A M I OEMXSDT> [tentative] on motherboard
installed MI handler for int 9
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 2
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_timer0.acpi0.nexus0.root0
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x808-0x80b
on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x808-0x80b
on acpi0
cpu0.acpi0.nexus0.root0
cpu0: <ACPI CPU> [tentative] on acpi0
cpu0: <ACPI CPU> [attached!] port 0x810-0x813 on acpi0
unknown: not probed (disabled)
acpi_button0.acpi0.nexus0.root0
acpi_button0: <Power Button> [tentative] on acpi0
acpi_button0: <Power Button> [attached!] on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi0: <A M I OEMXSDT> [attached!] at irq 9 on motherboard
pcib0.nexus0.root0
pcib0: <Host to PCI bridge> [tentative] at pcibus 0 on motherboard
pci0.pcib0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: pci_attach() physical bus=0
found-> vendor=0x8086, dev=0x2580, revid=0x04
bus=0, slot=0, func=0
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x2581, revid=0x04
bus=0, slot=1, func=0
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=4 secondarybus=4
intpin=a, irq=255
map[10]: type 1, range 64, base cddf4000, size 14
found-> vendor=0x8086, dev=0x2668, revid=0x03
bus=0, slot=27, func=0
class=[MULTIMEDIA]04-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
found-> vendor=0x8086, dev=0x2660, revid=0x03
bus=0, slot=28, func=0
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=3 secondarybus=3
intpin=a, irq=255
found-> vendor=0x8086, dev=0x2662, revid=0x03
bus=0, slot=28, func=1
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=2 secondarybus=2
intpin=b, irq=255
found-> vendor=0x8086, dev=0x244e, revid=0xd3
bus=0, slot=30, func=0
class=[BRIDGE]06-04-01, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x2640, revid=0x03
bus=0, slot=31, func=0
class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 00000000, size 3
map[14]: type 1, range 32, base 00000000, size 2
map[18]: type 1, range 32, base 00000000, size 3
map[1c]: type 1, range 32, base 00000000, size 2
map[20]: type 1, range 32, base 0000ffa0, size 4
found-> vendor=0x8086, dev=0x266f, revid=0x03
bus=0, slot=31, func=1
class=[STORAGE]01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
map[10]: type 1, range 32, base 0000ac00, size 3
map[14]: type 1, range 32, base 0000a880, size 2
map[18]: type 1, range 32, base 0000a800, size 3
map[1c]: type 1, range 32, base 0000a480, size 2
map[20]: type 1, range 32, base 0000a400, size 4
map[24]: type 1, range 32, base cddffc00, size 10
found-> vendor=0x8086, dev=0x2652, revid=0x03
bus=0, slot=31, func=2
class=[STORAGE]01-01-8f, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=11
map[20]: type 1, range 32, base 00000400, size 5
found-> vendor=0x8086, dev=0x266a, revid=0x03
bus=0, slot=31, func=3
class=[SERIALBUS]0c-05-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=255
pcib1.pci0.pcib0.nexus0.root0
pcib1: <PCI to PCI bridge (vendor=8086 device=2581)> [tentative] at
device 1.0 on pci0
pcib1: secondary bus 4
pcib1: subordinate bus 4
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xcdf00000-0xcfffffff
pcib1: prefetched decode 0xd0000000-0xdfffffff
pci4.pcib1.pci0.pcib0.nexus0.root0
pci4: <PCI bus> [tentative] on pcib1
pci4: pci_attach() physical bus=4
map[10]: type 1, range 32, base cf000000, size 24
map[14]: type 1, range 32, base d0000000, size 28
map[18]: type 1, range 32, base ce000000, size 24
found-> vendor=0x10de, dev=0x00fa, revid=0xa2
bus=4, slot=0, func=0
class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
pci4: <NVidia model 00fa graphics accelerator> (vendor=0x10de,
dev=0x00fa) at 0.0 irq 10
pci4: <PCI bus> [attached!] on pcib1
pcib1: <PCI to PCI bridge (vendor=8086 device=2581)> [attached!] at
device 1.0 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x2668) at 27.0 irq 10
pcib2.pci0.pcib0.nexus0.root0
pcib2: <PCI to PCI bridge (vendor=8086 device=2660)> [tentative] at
device 28.0 on pci0
pcib2: secondary bus 3
pcib2: subordinate bus 3
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xfff00000-0xfffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci3.pcib2.pci0.pcib0.nexus0.root0
pci3: <PCI bus> [tentative] on pcib2
pci3: pci_attach() physical bus=3
pci3: <PCI bus> [attached!] on pcib2
pcib2: <PCI to PCI bridge (vendor=8086 device=2660)> [attached!] at
device 28.0 on pci0
pcib3.pci0.pcib0.nexus0.root0
pcib3: <PCI to PCI bridge (vendor=8086 device=2662)> [tentative] at
device 28.1 on pci0
pcib3: secondary bus 2
pcib3: subordinate bus 2
pcib3: I/O decode 0xc000-0xcfff
pcib3: memory decode 0xcde00000-0xcdefffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci2.pcib3.pci0.pcib0.nexus0.root0
pci2: <PCI bus> [tentative] on pcib3
pci2: pci_attach() physical bus=2
map[10]: type 1, range 64, base cdefc000, size 14
map[18]: type 1, range 32, base 0000c800, size 8
found-> vendor=0x11ab, dev=0x4362, revid=0x15
bus=2, slot=0, func=0
class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=3
pci2: <unknown card> (vendor=0x11ab, dev=0x4362) at 0.0 irq 3
pci2: <PCI bus> [attached!] on pcib3
pcib3: <PCI to PCI bridge (vendor=8086 device=2662)> [attached!] at
device 28.1 on pci0
pcib4.pci0.pcib0.nexus0.root0
pcib4: <Intel 82801BA/CA/DB/EB/FB (ICH2/3/4/5/6) Hub to PCI bridge>
[tentative] at device 30.0 on pci0
pcib4: secondary bus 1
pcib4: subordinate bus 1
pcib4: I/O decode 0xb000-0xbfff
pcib4: memory decode 0xfff00000-0xfffff
pcib4: prefetched decode 0xfff00000-0xfffff
pcib4: Subtractively decoded bridge.
pci1.pcib4.pci0.pcib0.nexus0.root0
pci1: <PCI bus> [tentative] on pcib4
pci1: pci_attach() physical bus=1
map[10]: type 1, range 32, base 0000bc00, size 5
found-> vendor=0x10ec, dev=0x8029, revid=0x00
bus=1, slot=10, func=0
class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
pci1: <unknown card> (vendor=0x10ec, dev=0x8029) at 10.0 irq 5
pci1: <PCI bus> [attached!] on pcib4
pcib4: <Intel 82801BA/CA/DB/EB/FB (ICH2/3/4/5/6) Hub to PCI bridge>
[attached!] at device 30.0 on pci0
isab0.pci0.pcib0.nexus0.root0
isab0: <Intel 82801FB/FBW (ICH6) PCI to LPC bridge> [tentative] at
device 31.0 on pci0
isa0.isab0.pci0.pcib0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <Intel 82801FB/FBW (ICH6) PCI to LPC bridge> [attached!] at
device 31.0 on pci0
atapci0.pci0.pcib0.nexus0.root0
atapci0: <Intel ICH6R/RW ATA100 controller> [tentative] port
0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 14 eb
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=00 stat1=00
ata0: devices=04
ata0.atapci0.pci0.pcib0.nexus0.root0
ata0 [tentative]: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata0 [attached!]: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1.atapci0.pci0.pcib0.nexus0.root0
ata1 [tentative]: at 0x170 irq 15 on atapci0
installed MI handler for int 15
ata1 [attached!]: at 0x170 irq 15 on atapci0
atapci0: <Intel ICH6R/RW ATA100 controller> [attached!] port
0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
atapci1.pci0.pcib0.nexus0.root0
atapci1: <Intel ICH6R/RW SATA150 controller> [tentative] port
0xa400-0xa40f,0xa480-0xa483,0xa800-0xa807,0xa880-0xa883,0xac00-0xac07
mem 0xcddffc00-0xcddfffff irq 11 at device 31.2 on pci0
ata-: ata2 exists, using next available unit number
ata2: iobase=0xac00 altiobase=0xa882 bmaddr=0xa400
ata2: mask=03 ostat0=50 ostat2=00
ata2-master: ATAPI 00 00
ata2-slave: ATAPI 00 00
ata2: mask=03 stat0=50 stat1=00
ata2-master: ATA 01 a5
ata2: devices=01
ata2.atapci1.pci0.pcib0.nexus0.root0
ata2 [tentative]: at 0xac00 on atapci1
installed MI handler for int 11
ata2 [attached!]: at 0xac00 on atapci1
ata3: iobase=0xa800 altiobase=0xa482 bmaddr=0xa408
ata3: mask=03 ostat0=7f ostat2=7f
ata3-master: ATAPI ff ff
ata3-slave: ATAPI ff ff
ata3: mask=03 stat0=7f stat1=7f
ata3-master: ATA ff ff
ata3-slave: ATA ff ff
ata3: devices=00
ata3.atapci1.pci0.pcib0.nexus0.root0
ata3 [tentative]: at 0xa800 on atapci1
using shared irq11.
ata3 [attached!]: at 0xa800 on atapci1
atapci1: <Intel ICH6R/RW SATA150 controller> [attached!] port
0xa400-0xa40f,0xa482,0xa800-0xa807,0xa882,0xac00-0xac07 mem
0xcddffc00-0xcddfffff irq 11 at device 31.2 on pci0
ichsmb0.pci0.pcib0.nexus0.root0
ichsmb0: <SMBus controller> [tentative] port 0x400-0x41f at device 31.3
on pci0
device_probe_and_attach: ichsmb0 attach returned 6
pci0: <PCI bus> [attached!] on pcib0
pcib0: <Host to PCI bridge> [attached!] at pcibus 0 on motherboard
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0.isa0.isab0.pci0.pcib0.nexus0.root0
orm0: <Option ROM> [tentative] at iomem 0xc0000-0xcffff on isa0
orm0: <Option ROM> [attached!] at iomem 0xc0000-0xcffff on isa0
pmtimer0.isa0.isab0.pci0.pcib0.nexus0.root0
pmtimer0 [tentative] on isa0
pmtimer0 [attached!] on isa0
fdc0.isa0.isab0.pci0.pcib0.nexus0.root0
fdc0: <NEC 72065B or clone> [tentative] at port 0x3f0-0x3f5,0x3f7 irq 6
drq 2 on isa0
installed MI handler for int 6
fdc0: FIFO enabled, 8 bytes threshold
fdc0: <NEC 72065B or clone> [attached!] at port 0x3f0-0x3f5,0x3f7 irq 6
drq 2 on isa0
ata4 [tentative] failed to probe at port 0x1f0 irq 14 on isa0
ata5 [tentative] failed to probe at port 0x170 irq 15 on isa0
adv0 [tentative] failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 [tentative] failed to probe at port 0x134-0x137 on isa0
aic0 [tentative] failed to probe at port 0x140-0x15f on isa0
atkbdc0.isa0.isab0.pci0.pcib0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on isa0
atkbd0.atkbdc0.isa0.isab0.pci0.pcib0.nexus0.root0
atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
installed MI handler for int 1
atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0
psm0: current command byte:0065
psm0.atkbdc0.isa0.isab0.pci0.pcib0.nexus0.root0
psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
installed MI handler for int 12
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on isa0
vga0.isa0.isab0.pci0.pcib0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0.isa0.isab0.pci0.pcib0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0.isa0.isab0.pci0.pcib0.nexus0.root0
sio0 [tentative] at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio0 [attached!] at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio1: can't drain, serial port might not exist, disabling
sio1 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0.isa0.isab0.pci0.pcib0.nexus0.root0
ppc0: <Parallel port> [tentative] at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0.ppc0.isa0.isab0.pci0.pcib0.nexus0.root0
ppbus0: <Parallel port bus> [tentative] on ppc0
ppi0.ppbus0.ppc0.isa0.isab0.pci0.pcib0.nexus0.root0
ppi0: <Parallel I/O> [tentative] on ppbus0
ppi0: <Parallel I/O> [attached!] on ppbus0
plip0.ppbus0.ppc0.isa0.isab0.pci0.pcib0.nexus0.root0
plip0: <PLIP network interface> [tentative] on ppbus0
lp0: bpf attached
plip0: <PLIP network interface> [attached!] on ppbus0
lpt0.ppbus0.ppc0.isa0.isab0.pci0.pcib0.nexus0.root0
lpt0: <Printer> [tentative] on ppbus0
lpt0: Interrupt-driven port
lpt0: <Printer> [attached!] on ppbus0
ppbus0: <Parallel port bus> [attached!] on ppc0
installed MI handler for int 7
ppc0: <Parallel port> [attached!] at port 0x378-0x37f irq 7 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
installed MI handler for int 0
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
lo0: bpf attached
ppp0: bpf attached
sl0: bpf attached
faith0: bpf attached
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad4: DMA limited to UDMA33, non-ATA66 cable or device
ad4: success setting UDMA2 on Intel chip
ar: FreeBSD check1 failed
ad4: <SAMSUNG SP1213C/SV100-27> ATA-7 disk at ata2-master
ad4: 114498MB (234493056 sectors), 232632 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA33
ad4: piomode=4 dmamode=2 udmamode=6 cblid=0
ata0-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata0-master: success setting PIO4 on generic chip
acd0: <_NEC DVD_RW ND-3500AG/2.16> DVD-R drive at ata0 as master
acd0: read 8268KB/s (4782KB/s) write 8268KB/s (8268KB/s), 2048KB buffer,
PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Writes: CD-R, CD-RW, DVD-R, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
(probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata0:0:0:0): NOT READY asc:3a,0
(probe0:ata0:0:0:0): Medium not present sks:80,ffff
pass0 at ata0 bus 0 target 0 lun 0
pass0: <_NEC DVD_RW ND-3500AG 2.16> Removable CD-ROM SCSI-0 device
pass0: Serial Number [
pass0: 16.000MB/s transfers
bootdev: a0300000 type=0 unit=0 slice=3 part=0 major=3
Mounting root from ufs:/dev/ad4s2a
(cd0:ata0:0:0:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ata0:0:0:0): NOT READY asc:3a,0
(cd0:ata0:0:0:0): Medium not present sks:80,ffff
cd0 at ata0 bus 0 target 0 lun 0
cd0: <_NEC DVD_RW ND-3500AG 2.16> Removable CD-ROM SCSI-0 device
cd0: Serial Number [
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
ad4s1: type 0xa5, start 63, end = 2281229, size 2281167
ad4s1: C/H/S end 1023/1/63 (773513) != end 2281229: invalid
ad4s2: type 0xa5, start 2281230, end = 4562459, size 2281230 : OK
ad4s3: type 0xa5, start 4562460, end = 6843689, size 2281230
ad4s3: C/H/S end 1023/5/63 (773765) != end 6843689: invalid
ad4s4: type 0xa5, start 6843690, end = 234484739, size 227641050 : OK
start_init: trying /sbin/init
More information about the Bugs
mailing list