Compaq Smart Array 5i panic w/ Dragonfly 1.2

[Bill Marquette]

On 4/25/05, Bill Marquette <bill.marquette at xxxxxxxxx> wrote:
> On 4/25/05, Joerg Sonnenberger <joerg at xxxxxxxxxxxxxxxxx> wrote:
> > On Sat, Apr 23, 2005 at 04:36:23PM -0500, Bill Marquette wrote:
> > > Much happier now!  Although I think it's not seeing the disk...doh!
> > > Here's another dmesg...at least now I can just reboot w/out having to
> > > disable the 5i in BIOS.  Thanks
> >
> > I commited the fix and found a quirk in FreeBSD, which might help.
> > Can you retry with HEAD?
> >
> > Joerg
> 
> Will do.

OK, nothing appears to have broken :)  But I'm still having problems
with the RAID 5 disk.  I'm going to try rebuilding it, maybe the
controller has it indexed wrong (the RAID 1 on the LSI card used to be
on the 5i controller) that's messing up the driver.  Here's my current
dmesg using GENERIC with HTT disabled in BIOS and no SMP options
enabled in GENERIC.

--Bill

> dmesg
Copyright (c) 2003, 2004, 2005 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly 1.3-DEVELOPMENT #0: Mon Apr 25 09:50:21 CDT 2005
    root at xxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
TSC clock: 2785481604 Hz, i8254 clock: 1193182 Hz
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2785.56-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 3221200896 (3145704K bytes)
avail memory = 3120836608 (3047692K bytes)
Preloaded elf kernel "/kernel" at 0xc06e4000.
Preloaded elf module "/modules/acpi.ko" at 0xc06e4238.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <COMPAQ P29> on motherboard
installed MI handler for int 9
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
cpu0: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
isab0: <ACPI Generic ISA bridge> port
0x70-0x73,0x240-0x25f,0x220-0x223,0x2e-0x2f on acpi0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> at 3.0
pci0: <unknown card> (vendor=0x0e11, dev=0xb203) at 4.0 irq 3
pci0: <unknown card> (vendor=0x0e11, dev=0xb204) at 4.2 irq 3
isab1: <PCI to ISA bridge (vendor=1166 device=0201)> at device 15.0 on pci0
isa0: <ISA bus> on isab1
atapci0: <ServerWorks CSB5 ATA100 controller> port
0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at
device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
ohci0: <OHCI (generic) USB controller> mem 0xf5ef0000-0xf5ef0fff irq 3
at device 15.2 on pci0
installed MI handler for int 3
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <ServerWorks host to PCI bridge(unknown chipset)> at pcibus 1
on motherboard
pci1: <PCI bus> on pcib1
ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem
0xf7bf0000-0xf7bf3fff,0xf7cc0000-0xf7cfffff irq 11 at device 3.0 on
pci1
installed MI handler for int 11
ciss0: using 256 of 1024 available commands
ciss0:   1 logical drive configured
ciss0:   firmware 2.36
ciss0:   2 SCSI channels
ciss0:   signature 'CISS'
ciss0:   valence 1
ciss0:   supported I/O methods 0xe<simple,performant,MEMQ>
ciss0:   active I/O method 0x3<simple>
ciss0:   4G page base 0x00000000
ciss0:   interrupt coalesce delay 1000us
ciss0:   interrupt coalesce count 16
ciss0:   max outstanding commands 1024
ciss0:   bus types 0x2<ultra3>
ciss0:   server name ''
ciss0:   heartbeat 0x10000049
ciss0: 1 logical drive
ciss0: logical drive 1: RAID 5, 207872MB online
pcib2: <ServerWorks host to PCI bridge(unknown chipset)> at pcibus 2
on motherboard
pci2: <PCI bus> on pcib2
bge0: <Broadcom BCM5703X Gigabit Ethernet, ASIC rev. 0x1002> mem
0xf7df0000-0xf7dfffff irq 10 at device 1.0 on pci2
installed MI handler for int 10
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: MAC address: 00:0b:cd:69:cd:d9
bge1: <Broadcom BCM5703X Gigabit Ethernet, ASIC rev. 0x1002> mem
0xf7de0000-0xf7deffff irq 10 at device 2.0 on pci2
miibus1: <MII bus> on bge1
brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: MAC address: 00:0b:cd:69:cd:d8
pcib3: <ServerWorks host to PCI bridge> at pcibus 3 on motherboard
pci3: <PCI bus> on pcib3
pcib6: <ServerWorks host to PCI bridge(unknown chipset)> at pcibus 6
on motherboard
pci6: <PCI bus> on pcib6
pcib4: <PCI to PCI bridge (vendor=1044 device=a500)> at device 1.0 on pci6
pci7: <PCI bus> on pcib4
asr0: <Adaptec Caching SCSI RAID> at device 1.1 on pci6
asr0: major=154
asr0: could not map memory
device_probe_and_attach: asr0 attach returned 6
amr0: <LSILogic MegaRAID> mem 0xf7ef0000-0xf7efffff irq 7 at device 2.0 on pci6
installed MI handler for int 7
amr0: <LSILogic MegaRAID SCSI 320-1> Firmware 1L19, BIOS 1.04, 64MB RAM
pci6: <unknown card> (vendor=0x0e11, dev=0xa0f7) at 30.0 irq 5
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0727 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
installed MI handler for int 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
ciss0: *** Cache enabled
installed MI handler for int 0
acd0: CDROM <CD-224E> at ata0-master PIO4
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 17364MB (35561472 sectors) RAID 1 (optimal)
(probe0:ciss0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe0:ciss0:0:0:0): ILLEGAL REQUEST asc:68,0
(probe0:ciss0:0:0:0): Logical unit not configured
(probe0:ciss0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe0:ciss0:0:0:0): ILLEGAL REQUEST asc:68,0
(probe0:ciss0:0:0:0): Logical unit not configured
Mounting root from ufs:/dev/amrd0s1a
cd0 at ata0 bus 0 target 0 lun 0
cd0: <TEAC CD-224E 9.9A> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
bge0: gigabit link up
bge0: gigabit link up