Compaq Smart Array 5i panic w/ Dragonfly 1.2

Sat Apr 23 14:37:17 PDT 2005

On 4/23/05, Joerg Sonnenberger <joerg at xxxxxxxxxxxxxxxxx> wrote:
> On Sat, Apr 23, 2005 at 04:02:56PM -0500, Bill Marquette wrote:
> > On 4/23/05, Joerg Sonnenberger <joerg at xxxxxxxxxxxxxxxxx> wrote:
> > > Please try the attached patch.
> >
> > Joerg, I'm not sure if we're getting closer, but it panics in a
> > different place now.
> 
> Sorry, I should sleep more. Try again :)
> 
> Joerg

Much happier now!  Although I think it's not seeing the disk...doh! 
Here's another dmesg...at least now I can just reboot w/out having to
disable the 5i in BIOS.  Thanks

--Bill

OK boot -Dh
/modules/acpi.ko text=0x430f8 data=0x1cd4+0x878 syms=[0x4+0x6640+0x4+0x7f4d]
Copyright (c) 2003, 2004, 2005 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly 1.2.0-RELEASE #5: Sat Apr 23 11:42:12 CDT 2005
    root at xxxxxxxxxxxxxxxxxxxxx:/usr/src/sys/compile/GENERIC
TSC clock: 2785161396 Hz, i8254 clock: 1193174 Hz
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2785.41-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 3221200896 (3145704K bytes)
avail memory = 3121799168 (3048632K bytes)
Preloaded elf kernel "/kernel" at 0xc0672000.
Preloaded elf module "/modules/acpi.ko" at 0xc0672244.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <COMPAQ P29> on motherboard
installed MI handler for int 9
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
isab0: <ACPI Generic ISA bridge> port
0x70-0x73,0x240-0x25f,0x220-0x223,0x2e-0x2f on acpi0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> at 3.0
pci0: <unknown card> (vendor=0x0e11, dev=0xb203) at 4.0 irq 3
pci0: <unknown card> (vendor=0x0e11, dev=0xb204) at 4.2 irq 3
isab1: <PCI to ISA bridge (vendor=1166 device=0201)> at device 15.0 on pci0
isa0: <ISA bus> on isab1
atapci0: <ServerWorks CSB5 ATA100 controller> port
0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at
device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
ohci0: <OHCI (generic) USB controller> mem 0xf5ef0000-0xf5ef0fff irq 3
at device 15.2 on pci0
installed MI handler for int 3
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <ServerWorks host to PCI bridge(unknown chipset)> at pcibus 1
on motherboard
pci1: <PCI bus> on pcib1
ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem
0xf7bf0000-0xf7bf3fff,0xf7cc0000-0xf7cfffff irq 11 at device 3.0 on
pci1
installed MI handler for int 11
ciss0: using 256 of 1024 available commands
ciss0:   1 logical drive configured
ciss0:   firmware 2.36
ciss0:   2 SCSI channels
ciss0:   signature 'CISS'
ciss0:   valence 1
ciss0:   supported I/O methods 0xe<simple,performant,MEMQ>
ciss0:   active I/O method 0x3<simple>
ciss0:   4G page base 0x00000000
ciss0:   interrupt coalesce delay 1000us
ciss0:   interrupt coalesce count 16
ciss0:   max outstanding commands 1024
ciss0:   bus types 0x2<ultra3>
ciss0:   server name ''
ciss0:   heartbeat 0x10000036
ciss0: 1 logical drive
ciss0: logical drive 1: RAID 5, 207872MB online
pcib2: <ServerWorks host to PCI bridge(unknown chipset)> at pcibus 2
on motherboard
pci2: <PCI bus> on pcib2
bge0: <Broadcom BCM5703X Gigabit Ethernet, ASIC rev. 0x1002> mem
0xf7df0000-0xf7dfffff irq 10 at device 1.0 on pci2
installed MI handler for int 10
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: MAC address: 00:0b:cd:69:cd:d9
bge1: <Broadcom BCM5703X Gigabit Ethernet, ASIC rev. 0x1002> mem
0xf7de0000-0xf7deffff irq 10 at device 2.0 on pci2
miibus1: <MII bus> on bge1
brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: MAC address: 00:0b:cd:69:cd:d8
pcib3: <ServerWorks host to PCI bridge(unknown chipset)> at pcibus 3
on motherboard
pci3: <PCI bus> on pcib3
pcib6: <ServerWorks host to PCI bridge(unknown chipset)> at pcibus 6
on motherboard
pci6: <PCI bus> on pcib6
pcib4: <PCI to PCI bridge (vendor=1044 device=a500)> at device 1.0 on pci6
pci7: <PCI bus> on pcib4
asr0: <Adaptec Caching SCSI RAID> at device 1.1 on pci6
asr0: major=154
asr0: could not map memory
device_probe_and_attach: asr0 attach returned 6
amr0: <LSILogic MegaRAID> mem 0xf7ef0000-0xf7efffff irq 7 at device 2.0 on pci6
installed MI handler for int 7
amr0: <LSILogic MegaRAID SCSI 320-1> Firmware 1L19, BIOS 1.04, 64MB RAM
pci6: <unknown card> (vendor=0x0e11, dev=0xa0f7) at 30.0 irq 5
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0727 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
installed MI handler for int 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
installed MI handler for int 4
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
ciss0: *** Cache enabled
installed MI handler for int 0
acd0: CDROM <CD-224E> at ata0-master PIO4
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 17364MB (35561472 sectors) RAID 1 (optimal)
(probe0:ciss0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 
(probe0:ciss0:0:0:0): ILLEGAL REQUEST asc:68,0
(probe0:ciss0:0:0:0): Logical unit not configured
(probe0:ciss0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 
(probe0:ciss0:0:0:0): ILLEGAL REQUEST asc:68,0
(probe0:ciss0:0:0:0): Logical unit not configured
Mounting root from ufs:/dev/amrd0s1a
cd0 at ata0 bus 0 target 0 lun 0
cd0: <TEAC CD-224E 9.9A> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Loading configuration files.
. 
swapon: adding /dev/amrd0s1b as swap device
Starting file system checks:
/dev/amrd0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1a: clean, 155594 free (138 frags, 19432 blocks, 0.1% fragmentation)
/dev/amrd0s1d: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1d: clean, 252897 free (57 frags, 31605 blocks, 0.0% fragmentation)
/dev/amrd0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1e: clean, 254055 free (15 frags, 31755 blocks, 0.0% fragmentation)
/dev/amrd0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1f: clean, 12362315 free (16611 frags, 1543213 blocks, 0.1%
fragmentation)