no kernel

[YONETANI Tomokazu]

On Sun, May 30, 2004 at 12:51:13AM +0000, Robert.Gauthier at xxxxxxxxxxxxxxxxxxxxxxx wrote:
> OK ls
> open '/' failed: no such file or directory
> OK show
> LINES=24
> console=vidconsole
> currdev=cd0:
> interpret=OK
> loadev=cd0:
> prompt=%{interpret}
> OK lsdev
> cd devices:
>     cd0: Devuce0x0
> disk devices:
> shows both disks with respective well indentyfied slices.
>     
> The cd drive is master on ata0 controller; the two disks are fed by an el
> cheapo ata133 controller.
> The first is an ata100 80 Gb.
> Second is a 20 Gb.
>     
> Installs by "cpduping" from cd or "rsyncing" from disk were working well
> before reshuffling everything around; the cd was then, and still is
> primary master.
> 
> The solution to this problem is beyond my knowledge base and creativity.  ;^)

In theory, you can achieve it by undoing the "reshuffling everything
around" :) By "reshuffling" you mean installing a new kernel/world?
Or swapping disk drives? And do you usually boot from a Live CD, rather
than from the boot loader installed on the disk drive, to use your
DragonFly box?