<div dir="ltr">I don't know if it's the same problem, but I had i915 issues some years ago and it was affected by timing of the module load:<div><br></div><div><a href="https://www.dragonflydigest.com/2017/09/14/booting-uefi-and-text-consoles/">https://www.dragonflydigest.com/2017/09/14/booting-uefi-and-text-consoles/</a><br></div><div><a href="https://www.dragonflydigest.com/2017/11/23/remember-dont-kldload-i915/">https://www.dragonflydigest.com/2017/11/23/remember-dont-kldload-i915/</a><br></div><div><br></div><div><br></div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Apr 19, 2024 at 10:15 AM karu.pruun <<a href="mailto:karu.pruun@gmail.com">karu.pruun@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Hello<br>
<br>
Can you try the following:<br>
<br>
- boot to console<br>
- load the i915 manually<br>
<br>
% sudo kldload i915<br>
<br>
- use an xorg.conf that only specifies the intel PCI device (edit the<br>
PCI BusID manually in xorg.conf) and uses modesetting driver, see the<br>
attached xorg.conf<br>
<br>
- now start xorg<br>
<br>
% startx<br>
<br>
Does this give a working Xorg?<br>
<br>
Best<br>
<br>
Peeter<br>
<br>
--<br>
<br>
<br>
<br>
On Fri, Apr 19, 2024 at 1:50 PM Martin Ivanov <<a href="mailto:marto1980@gmail.com" target="_blank">marto1980@gmail.com</a>> wrote:<br>
><br>
> Hello Michael,<br>
> Thank you very much for your reply. I repeated starts several times but nothing changed. Maybe if I disable direct rendering it could be fixed? How could I prevent the drm driver from being loaded?<br>
><br>
> Best regards,<br>
> Martin<br>
><br>
> On 19 Apr 2024, at 13:37, Michael Neumann <<a href="mailto:mneumann@ntecs.de" target="_blank">mneumann@ntecs.de</a>> wrote:<br>
><br>
> On Fri, Apr 19, 2024 at 12:53:08PM +0200, Martin Ivanov wrote:<br>
><br>
> Hello, I just installed DragonFly version 6.4.However, I have problems<br>
> starting the X server. The respective log file Xorg.1.log is attached. I<br>
> have an Intel graphics card with an Nvidia on top. More than 3 years ago I<br>
> had no problems starting X with that hardware, but now there are problems.<br>
><br>
><br>
> Any suggestions will be appreciated.<br>
><br>
><br>
> Can you try to "startx" again after the first "startx" failed? On one of<br>
> my laptops, I always have to "startx" twice to make it work :/<br>
><br>
> Hope this works!<br>
><br>
> Regards,<br>
><br>
> Michael<br>
><br>
><br>
> Thank you very much in advance.<br>
><br>
> Best regards,<br>
> Martin<br>
><br>
> Here follow some more details on my hardware:<br>
><br>
> bash-5.0# lspci<br>
> 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core<br>
> Processor Host Bridge/DRAM Registers (rev 05)<br>
> 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen<br>
> Core Processor PCIe Controller (x16) (rev 05)<br>
> 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 630 (rev<br>
> 04)<br>
> 00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200<br>
> v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 05)<br>
> 00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset<br>
> Family USB 3.0 xHCI Controller (rev 31)<br>
> 00:14.2 Signal processing controller: Intel Corporation 100 Series/C230<br>
> Series Chipset Family Thermal Subsystem (rev 31)<br>
> 00:15.0 Signal processing controller: Intel Corporation 100 Series/C230<br>
> Series Chipset Family Serial IO I2C Controller #0 (rev 31)<br>
><br>
><br>
> 00:15.1 Signal processing controller: Intel Corporation 100 Series/C230<br>
> Series Chipset Family Serial IO I2C Controller #1 (rev 31)<br>
><br>
><br>
> 00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series<br>
> Chipset Family MEI Controller #1 (rev 31)<br>
><br>
><br>
> 00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family<br>
> PCI Express Root Port #1 (rev f1)<br>
><br>
><br>
> 00:1c.2 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family<br>
> PCI Express Root Port #3 (rev f1)<br>
><br>
><br>
> 00:1c.4 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family<br>
> PCI Express Root Port #5 (rev f1)<br>
><br>
><br>
> 00:1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family<br>
> PCI Express Root Port #9 (rev f1)<br>
><br>
><br>
> 00:1f.0 ISA bridge: Intel Corporation HM175 Chipset LPC/eSPI Controller<br>
> (rev 31)<br>
><br>
><br>
> 00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset<br>
> Family Power Management Controller (rev 31)<br>
><br>
><br>
> 00:1f.3 Audio device: Intel Corporation CM238 HD Audio Controller (rev 31)<br>
><br>
><br>
><br>
> 00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family<br>
> SMBus (rev 31)<br>
><br>
><br>
> 01:00.0 3D controller: NVIDIA Corporation GP107M [GeForce GTX 1050 Mobile]<br>
> (rev a1)<br>
><br>
><br>
> 02:00.0 Unassigned class [ff00]: Alcor Micro AU6621 PCI-E Flash card reader<br>
> controller<br>
><br>
><br>
> 03:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78)<br>
><br>
><br>
><br>
> 6f:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD<br>
> Controller SM961/PM961<br>
><br>
><br>
> [ 7492.571]<br>
> X.Org X Server 1.21.1.9<br>
> X Protocol Version 11, Revision 0<br>
> [ 7492.571] Current Operating System: DragonFly DragonFly 6.4-RELEASE DragonFly v6.4.0-RELEASE #54: F x86_64<br>
> [ 7492.571]<br>
> [ 7492.571] Current version of pixman: 0.42.2<br>
> [ 7492.571] Before reporting problems, check <a href="http://wiki.x.org" rel="noreferrer" target="_blank">http://wiki.x.org</a><br>
> to make sure that you have the latest version.<br>
> [ 7492.571] Markers: (--) probed, (**) from config file, (==) default setting,<br>
> (++) from command line, (!!) notice, (II) informational,<br>
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.<br>
> [ 7492.571] (==) Log file: "/var/log/Xorg.1.log", Time: Fri Apr 19 12:36:44 2024<br>
> [ 7492.571] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"<br>
> [ 7492.561] (==) No Layout section. Using the first Screen section.<br>
> [ 7492.561] (==) No screen section available. Using defaults.<br>
> [ 7492.561] (**) |-->Screen "Default Screen Section" (0)<br>
> [ 7492.561] (**) | |-->Monitor "<default monitor>"<br>
> [ 7492.561] (==) No monitor specified for screen "Default Screen Section".<br>
> Using a default monitor configuration.<br>
> [ 7492.561] (==) Automatically adding devices<br>
> [ 7492.561] (==) Automatically enabling devices<br>
> [ 7492.561] (==) Automatically adding GPU devices<br>
> [ 7492.561] (==) Automatically binding GPU devices<br>
> [ 7492.561] (==) Max clients allowed: 256, resource mask: 0x1fffff<br>
> [ 7492.561] (==) FontPath set to:<br>
> /usr/local/share/fonts/misc/,<br>
> /usr/local/share/fonts/TTF/,<br>
> /usr/local/share/fonts/OTF/,<br>
> /usr/local/share/fonts/Type1/,<br>
> /usr/local/share/fonts/100dpi/,<br>
> /usr/local/share/fonts/75dpi/,<br>
> catalogue:/usr/local/etc/X11/fontpath.d<br>
> [ 7492.561] (==) ModulePath set to "/usr/local/lib/xorg/modules"<br>
> [ 7492.561] (II) The server relies on udev to provide the list of input devices.<br>
> If no devices become available, reconfigure udev or disable AutoAddDevices.<br>
> [ 7492.561] (II) Module ABI versions:<br>
> [ 7492.561] X.Org ANSI C Emulation: 0.4<br>
> [ 7492.561] X.Org Video Driver: 25.2<br>
> [ 7492.561] X.Org XInput driver : 24.4<br>
> [ 7492.561] X.Org Server Extension : 10.0<br>
> [ 7492.601] (II) xfree86: Adding drm device (/dev/dri/card0)<br>
> [ 7492.601] (II) Platform probe for /dev/dri/card0<br>
> [ 7492.601] (--) PCI:*(0@0:2:0) 8086:591b:1043:1970 rev 4, Mem @ 0xeb000000/16777216, 0x40000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/65536<br>
> [ 7492.601] (--) PCI: (1@0:0:0) 10de:1c8d:1043:1970 rev 161, Mem @ 0xec000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x0000e000/128<br>
> [ 7492.601] (II) LoadModule: "glx"<br>
> [ 7492.601] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so<br>
> [ 7492.601] (II) Module glx: vendor="X.Org Foundation"<br>
> [ 7492.601] compiled for 1.21.1.9, module version = 1.0.0<br>
> [ 7492.601] ABI class: X.Org Server Extension, version 10.0<br>
> [ 7492.601] (==) Matched intel as autoconfigured driver 0<br>
> [ 7492.601] (==) Matched modesetting as autoconfigured driver 1<br>
> [ 7492.601] (==) Matched scfb as autoconfigured driver 2<br>
> [ 7492.601] (==) Matched vesa as autoconfigured driver 3<br>
> [ 7492.601] (==) Assigned the driver to the xf86ConfigLayout<br>
> [ 7492.601] (II) LoadModule: "intel"<br>
> [ 7492.601] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so<br>
> [ 7492.601] (II) Module intel: vendor="X.Org Foundation"<br>
> [ 7492.601] compiled for 1.21.1.9, module version = 2.99.917<br>
> [ 7492.601] Module class: X.Org Video Driver<br>
> [ 7492.601] ABI class: X.Org Video Driver, version 25.2<br>
> [ 7492.601] (II) LoadModule: "modesetting"<br>
> [ 7492.601] (II) Loading /usr/local/lib/xorg/modules/drivers/modesetting_drv.so<br>
> [ 7492.611] (II) Module modesetting: vendor="X.Org Foundation"<br>
> [ 7492.611] compiled for 1.21.1.9, module version = 1.21.1<br>
> [ 7492.611] Module class: X.Org Video Driver<br>
> [ 7492.611] ABI class: X.Org Video Driver, version 25.2<br>
> [ 7492.621] (II) LoadModule: "scfb"<br>
> [ 7492.621] (II) Loading /usr/local/lib/xorg/modules/drivers/scfb_drv.so<br>
> [ 7492.621] (II) Module scfb: vendor="X.Org Foundation"<br>
> [ 7492.621] compiled for 1.21.1.9, module version = 0.0.5<br>
> [ 7492.621] ABI class: X.Org Video Driver, version 25.2<br>
> [ 7492.621] (II) LoadModule: "vesa"<br>
> [ 7492.621] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so<br>
> [ 7492.621] (II) Module vesa: vendor="X.Org Foundation"<br>
> [ 7492.621] compiled for 1.21.1.9, module version = 2.5.0<br>
> [ 7492.621] Module class: X.Org Video Driver<br>
> [ 7492.621] ABI class: X.Org Video Driver, version 25.2<br>
> [ 7492.621] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:<br>
> i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,<br>
> 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,<br>
> Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,<br>
> GM45, 4 Series, G45/G43, Q45/Q43, G41, B43<br>
> [ 7492.621] (II) intel: Driver for Intel(R) HD Graphics<br>
> [ 7492.621] (II) intel: Driver for Intel(R) Iris(TM) Graphics<br>
> [ 7492.621] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics<br>
> [ 7492.621] (II) modesetting: Driver for Modesetting Kernel Drivers: kms<br>
> [ 7492.621] (II) scfb: driver for wsdisplay framebuffer: scfb<br>
> [ 7492.621] (II) VESA: driver for VESA chipsets: vesa<br>
> [ 7492.621] (--) Using syscons driver with X support (version 2.0)<br>
> [ 7492.621] (--) using VT number 9<br>
><br>
> [ 7493.641] (WW) Falling back to old probe method for modesetting<br>
> [ 7493.651] (WW) Falling back to old probe method for scfb<br>
> [ 7493.651] scfb trace: probe start<br>
> [ 7493.651] scfb trace: probe done<br>
> [ 7493.651] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support<br>
> [ 7493.651] (II) intel(0): Creating default Display subsection in Screen section<br>
> "Default Screen Section" for depth/fbbpp 24/32<br>
> [ 7493.651] (==) intel(0): Depth 24, (--) framebuffer bpp 32<br>
> [ 7493.651] (==) intel(0): RGB weight 888<br>
> [ 7493.651] (==) intel(0): Default visual is TrueColor<br>
> [ 7493.651] (--) intel(0): gen9 engineering sample<br>
> [ 7493.651] (**) intel(0): Relaxed fencing enabled<br>
> [ 7493.651] (**) intel(0): Wait on SwapBuffers? enabled<br>
> [ 7493.651] (**) intel(0): Triple buffering? enabled<br>
> [ 7493.651] (**) intel(0): Framebuffer tiled<br>
> [ 7493.651] (**) intel(0): Pixmaps tiled<br>
> [ 7493.651] (**) intel(0): 3D buffers tiled<br>
> [ 7493.651] (**) intel(0): SwapBuffers wait enabled<br>
> [ 7493.651] (==) intel(0): video overlay key set to 0x101fe<br>
> [ 7493.651] (II) intel(0): Output eDP-1 has no monitor section<br>
> [ 7493.651] (II) intel(0): Output DP-1 has no monitor section<br>
> [ 7493.651] (II) intel(0): Output HDMI-1 has no monitor section<br>
> [ 7493.651] (II) intel(0): Output DP-2 has no monitor section<br>
> [ 7493.651] (II) intel(0): EDID for output eDP-1<br>
> [ 7493.651] (II) intel(0): Manufacturer: CMN Model: 15e8 Serial#: 0<br>
> [ 7493.651] (II) intel(0): Year: 2016 Week: 33<br>
> [ 7493.651] (II) intel(0): EDID Version: 1.4<br>
> [ 7493.651] (II) intel(0): Digital Display Input<br>
> [ 7493.651] (II) intel(0): 8 bits per channel<br>
> [ 7493.651] (II) intel(0): Digital interface is DisplayPort<br>
> [ 7493.651] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19<br>
> [ 7493.651] (II) intel(0): Gamma: 2.20<br>
> [ 7493.651] (II) intel(0): No DPMS capabilities specified<br>
> [ 7493.651] (II) intel(0): Supported color encodings: RGB 4:4:4<br>
> [ 7493.651] (II) intel(0): First detailed timing is preferred mode<br>
> [ 7493.651] (II) intel(0): Preferred mode is native pixel format and refresh rate<br>
> [ 7493.651] (II) intel(0): redX: 0.648 redY: 0.338 greenX: 0.313 greenY: 0.600<br>
> [ 7493.651] (II) intel(0): blueX: 0.153 blueY: 0.050 whiteX: 0.313 whiteY: 0.329<br>
> [ 7493.651] (II) intel(0): Manufacturer's mask: 0<br>
> [ 7493.651] (II) intel(0): Supported detailed timing:<br>
> [ 7493.651] (II) intel(0): clock: 152.8 MHz Image Size: 344 x 193 mm<br>
> [ 7493.651] (II) intel(0): h_active: 1920 h_sync: 2000 h_sync_end 2054 h_blank_end 2250 h_border: 0<br>
> [ 7493.651] (II) intel(0): v_active: 1080 v_sync: 1086 v_sync_end 1094 v_blanking: 1132 v_border: 0<br>
> [ 7493.651] (II) intel(0): N156HCE-EN1<br>
> [ 7493.651] (II) intel(0): CMN<br>
> [ 7493.651] (II) intel(0): N156HCE-EN1<br>
> [ 7493.651] (II) intel(0): EDID (in hex):<br>
> [ 7493.651] (II) intel(0): 00ffffffffffff000daee81500000000<br>
> [ 7493.651] (II) intel(0): 211a0104a5221378022675a656509927<br>
> [ 7493.651] (II) intel(0): 0c505400000001010101010101010101<br>
> [ 7493.651] (II) intel(0): 010101010101b43b804a713834405036<br>
> [ 7493.651] (II) intel(0): 680058c110000018000000fe004e3135<br>
> [ 7493.651] (II) intel(0): 364843452d454e310a20000000fe0043<br>
> [ 7493.651] (II) intel(0): 4d4e0a202020202020202020000000fe<br>
> [ 7493.651] (II) intel(0): 004e3135364843452d454e310a2000a2<br>
> [ 7493.651] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "320x180" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "320x180" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "360x202" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "360x202" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "432x243" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "432x243" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "480x270" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "480x270" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "512x288" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "512x288" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "640x360" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "640x360" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "684x384" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "684x384" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "800x450" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "800x450" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "1024x576" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "1024x576" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "1280x720" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "1280x720" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "1440x810" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "1440x810" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "1600x900" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "1600x900" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "1920x1080" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "1920x1080" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "640x400" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "640x400" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "700x450" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "700x450" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "1280x800" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Not using default mode "1280x800" (doublescan mode not supported)<br>
> [ 7493.651] (II) intel(0): Printing probed modes for output eDP-1<br>
> [ 7493.651] (II) intel(0): Modeline "1920x1080"x60.0 152.84 1920 2000 2054 2250 1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)<br>
> [ 7493.651] (II) intel(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)<br>
> [ 7493.651] (II) intel(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)<br>
> [ 7493.651] (II) intel(0): EDID for output DP-1<br>
> [ 7493.661] (II) intel(0): EDID for output HDMI-1<br>
> [ 7493.661] (II) intel(0): EDID for output DP-2<br>
> [ 7493.661] (II) intel(0): Output eDP-1 connected<br>
> [ 7493.661] (II) intel(0): Output DP-1 disconnected<br>
> [ 7493.661] (II) intel(0): Output HDMI-1 disconnected<br>
> [ 7493.661] (II) intel(0): Output DP-2 disconnected<br>
> [ 7493.661] (II) intel(0): Using exact sizes for initial modes<br>
> [ 7493.661] (II) intel(0): Output eDP-1 using initial mode 1920x1080 +0+0<br>
> [ 7493.661] (II) intel(0): Kernel page flipping support detected, enabling<br>
> [ 7493.661] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)<br>
> [ 7493.661] (==) intel(0): DPI set to (96, 96)<br>
> [ 7493.661] (II) Loading sub module "fb"<br>
> [ 7493.661] (II) LoadModule: "fb"<br>
> [ 7493.661] (II) Module "fb" already built-in<br>
> [ 7493.661] (II) Loading sub module "dri2"<br>
> [ 7493.661] (II) LoadModule: "dri2"<br>
> [ 7493.661] (II) Module "dri2" already built-in<br>
> [ 7495.681] (EE) intel(G0): [drm] failed to set drm interface version: Unknown error: -13 [-13].<br>
> [ 7495.681] (EE) intel(G0): Failed to become DRM master.<br>
> [ 7495.681] (EE) Segmentation fault at address 0x20<br>
> [ 7495.681] (EE)<br>
> Fatal server error:<br>
> [ 7495.681] (EE) Caught signal 11 (Segmentation fault). Server aborting<br>
> [ 7495.681] (EE)<br>
> [ 7495.681] (EE)<br>
> Please consult the The X.Org Foundation support<br>
> at <a href="http://wiki.x.org" rel="noreferrer" target="_blank">http://wiki.x.org</a><br>
> for help.<br>
> [ 7495.681] (EE) Please also check the log file at "/var/log/Xorg.1.log" for additional information.<br>
> [ 7495.681] (EE)<br>
> [ 7495.691] (EE) Server terminated with error (1). Closing log file.<br>
><br>
><br>
><br>
> --<br>
> Michael Neumann<br>
> NTECS Consulting<br>
> <a href="http://www.ntecs.de" rel="noreferrer" target="_blank">www.ntecs.de</a><br>
><br>
><br>
</blockquote></div>