<div dir="ltr"><div><div>There are two places.  You can set global make variables related to ports based on the profile selected in /etc/dsynth/dsynth.init.  For example, if the profile is 'LiveSystem' (which is the default I think), you can then put global make variables applied to all ports in /etc/dsynth/LiveSystem-make.conf </div></div><div><br></div><div>The second place is the Directory_options specified directory, configured from /etc/dsynth/dsynth.ini.   This will be passed as the PORT_DBDIR make option to the dports builds done by dsynth and may contain per-port files with options for those ports in it.   The file format is the same as for the normal PORT_DBDIR.</div><div><br></div><div>So, for example, if you cd into a dport, say www/chromium, and do a 'make config', it will create a directory /var/db/ports/www_chromium and a file in that directory called "options" based on the options you configured for that port.</div><div><br></div><div>In dsynth, the options directory is specified by the Directory_options configuration variable in /etc/dsynth/dsynth.ini ... you would normally either point that directly at your local machine's /var/db/ports, or you would copy options you have set in /var/db/ports to the location that you specify for dsynth to pick them up from.</div><div><br></div><div>Creating the options is basically CD'ing into the dport and typing 'make config'.  That will create the options sub-directory and file under /var/db/ports/ ... which you then have dsynth either use directly or you copy the structure to where dsynth can pick it up.</div><div><br></div><div>-Matt</div></div>