<div dir="ltr">You probably need to modify /etc/ttys to set the appropriate speed for the port.  I had to do that to get an ancient ADM/3A working:<div><br></div><div><a href="https://www.dragonflydigest.com/2020/12/30/25257.html" target="_blank">https://www.dragonflydigest.com/2020/12/30/25257.html</a><br></div><div><br></div><div>That is a guess on my part; I have never used the hardware you mention.</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Mon, Apr 5, 2021 at 5:02 PM <a href="mailto:bobmc@bobmc.net" target="_blank">bobmc@bobmc.net</a> <<a href="mailto:admin1@bobmc.net" target="_blank">admin1@bobmc.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div>Why picocom or minicom? Computers, terminals, modems, and printers were once connected in a system using RS232 serial ports. That use-case is obsolete and the Ports of minicom and picocom are unmaintained but there is still a use-case. For example, in a factory, simple controllers, widely placed, can be wired into a system computer via RS485.</div><div><br></div>I would like to use picocom with DragonFly. It is most simple to list the RS232 with "ls -l /dev/tty*" and  "picocom /dev/tty.." something? I tried several and got "operation not supported" using the root account.<div><br></div><div>I have a Asrock QC5000-ITX which has an on-board UART. I also have a USB-RS232 (CH341). Using these devices on Linux presents no challenge.</div><div><br></div><div>Perhaps one or more settings in rc.d.serial need to be changed. Is there a document somewhere that would help me understand the BSD details.</div></div>
</blockquote></div>