<br><br>On Friday, January 15, 2021, Justin Sherrill <<a href="mailto:justin@shiningsilence.com">justin@shiningsilence.com</a>> wrote:<br>> Is the SSD connected using the same cable and motherboard port as the HDD used?  It's not likely to be the reason, but trying a different cable and port may be useful if you are not doing that already.  If changing those helps, then the problem was the connection and not the disk.<br>> On Fri, Jan 15, 2021 at 12:19 PM Antonio Olivares <<a href="mailto:olivares14031@gmail.com">olivares14031@gmail.com</a>> wrote:<br>>><br>>> Dear kind Dragonfly BSD users,<br>>><br>>> I had a 320GB sata hd with dragonflyBSD installed.  I upgraded it to 5.83 thanks to help from users here on list.  The disk is turning bad and the system boots but when I try to run a program it freezes.  I removed the hard drive and installed an SSD and I get lots of errors and am unable to get it working.  I have some screenshots if needed.  Ssd is a kingston 480 GB .  Any pointers and advice are appreciated.<br><br>I switched cables but errors still occur.<br><br>I guess I have to use a regular 7200 sata disk, but I am stubborn and want to use a ssd.  Thank you for advice and suggestions<br><br>Best Regards<br><br>Antonio<br><br>