<div dir="ltr">Generally speaking this error occurs if a directory entry is present but the related inode cannot be found.  You can use a hammer2 directive to destroy the directory entry to clean it up.  But before you do so you want to check the media for CHECK FAIL errors.<div><br></div><div>The easiest way to do this is to just read off the entire directory structure with tar, e.g. 'tar cf /dev/null filesystem' and then check the dmesg output for errors.  'dmesg | fgrep CHECK'.  Something like that.</div><div><br></div><div>If the filesystem appears clean other than the disconnected directory entry, then you can use 'hammer2 destroy filename' to destroy the directory entry.  Be very careful when doing that.</div><div><br></div><div>If the filesystem has other problems, such as CRC errors, other CHECK errors, etc.... then it is best to make a full backup and reformat.</div><div><br></div><div>Also make sure that bulkfree runs don't have errors.  'hammer2 bulkfree ...' and then check dmesg output as well.</div><div><br></div><div>--</div><div><br></div><div>In terms of how a disconnected inode can happen.  It has become more rare but it might still be possible if a power failure or panic occurs during heavy filesystem activity.  It shouldn't be possible for CRC errors to occur unless the media itself corrupted the data.</div><div><br></div><div>-Matt</div></div>