<div dir="ltr"><div><div>Thanks, Rimvydas - <br><br></div>Had a chance to try out the newest master, and the iwm driver works great now!<br><br></div><div>Unfortunately, I won't be able to test the radeon drivers for a bit - the i915 ones work well enough (well, there's a good bit of tearing), that I think I'm going to return the card right now. I may re-evaluate when the next release comes around and see where things stand. I don't really need 3D anything, I just need a displayport connector and a reasonably quiet card that supports 3440 x 1440 - this was the cheapest I found.<br><br></div><div>Anyway, thanks very much to you and Imre for your help!<br><br></div><div>- Andy<br></div><div><br></div><div></div><div class="gmail_extra"><br><div class="gmail_quote">On Tue, May 10, 2016 at 4:53 AM, Rimvydas Jasinskas <span dir="ltr"><<a href="mailto:rimvydasjas@gmail.com" target="_blank">rimvydasjas@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><span class="">On Thu, May 5, 2016 at 8:43 PM, Andrew Slaughter<br>
<<a href="mailto:andrew.slaughter@gmail.com">andrew.slaughter@gmail.com</a>> wrote:<br>
> Hi everyone -<br>
><br>
> I've been using Dragonfly on an old lenovo laptop for a while, and thought I<br>
> might want to give it a try on my desktop system. I wasn't sure how much of<br>
> the system would be supported (it's a skylake, with an Intel 7260AC adapter,<br>
> and a Radeon R7 360 graphics card), but wanted to give a go.... DF 4.4.3<br>
> installs just fine, but the first issue I've run into is getting the intel<br>
> wireless adapter working.<br>
><br>
</span>Can't say much about iwm problems but Imre Vadasz just pushed big<br>
wireless update to DragonFly master branch. You might have more luck<br>
with it.<br>
<br>
As for dual gpu setup you might need to disable integrated skylake<br>
adapter in bios to have working radeon card, unless your bios(uefi?)<br>
does that already.<br>
I just got myself the Gigabyte R7 360 BONAIRE card and started playing<br>
with it. Only card ID was missing in both kernel and xorg drivers.<br>
Update xf86-video-ati to v7.7.0 was pushed into the DPorts so in a few<br>
days it should be available as binary package once builders finish<br>
rebuilding the tree.<br>
<span class=""><br>
> Anyone have any thoughts or advice? Sorry if I'm missing something simple -<br>
> I'm pretty inexperienced when it comes to unix. Also, if anyone knows of a<br>
> good cheap graphics card supported by Dfly that has displayport, I'd<br>
> appreciate it (just in case I don't get the R7 360 working).<br>
><br>
</span>The bug preventing to read EDID information from the monitor when<br>
using Display-Port in DragonFly implementation of drm/radeonkms<br>
aux/i2c was fixed in commit 8a140387ae41e85be4beaf0b2a7b90ab997d1c86<br>
Previous to it using DP resulted in having just "generic" vga<br>
resolutions like 1024x768, 800x600 etc and needed<br>
drm.edid_firmware="edidfw_MONITOR" loader.conf tunable<br>
to point to extracted EDID block firmware module for correct supported<br>
video modes.<br>
Keep in mind that DP port currently has few known quirks like re<br>
plugging the cable keeps the connector in disconnected state.<br>
So far I couldn't tackle it, DP support is a bit more complicated than<br>
DVI/HDMI and any help on this would be very welcomed.<br>
<br>
With Dragonfly master branch (think about it like a rolling release)<br>
have tested DP on Radeon HD5770 and R7 360 cards.<br>
Even an old JUNIPER hd5770 is able to handle 2560x1440 Dell monitor<br>
at a native resolution when connected through Display-Port.<br>
If I don't find any serious problems, R7 360 support will be<br>
included in next DragonFly release.<br>
<br>
Lets us know how it performs.<br>
<span class="HOEnZb"><font color="#888888"><br>
RJ<br>
</font></span></blockquote></div><br></div></div>