<div dir="ltr"><div><div><div>Hi,<br><br></div>I have commit the ASF support (obtained from FreeBSD) to master. Please try the snapshot at <a href="http://mirror-master.dragonflybsd.org/snapshots/x86_64/images/">http://mirror-master.dragonflybsd.org/snapshots/x86_64/images/</a><br>
<br></div>The image contains the fix (57b622244562b2b67b60bc5eeecd498f5946d359) probably will pop up tomorrow. <br><br></div>Best Regards,<br><div><div><div><div><div class="gmail_extra">sephe<br></div><div class="gmail_extra">
<br><div class="gmail_quote">On Tue, Dec 3, 2013 at 2:55 PM, Makoto Fujiwara <span dir="ltr"><<a href="mailto:makoto@ki.nu" target="_blank">makoto@ki.nu</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
| From: Sepherosa Ziehau <<a href="mailto:sepherosa@gmail.com">sepherosa@gmail.com</a>><br>
| Subject: Re: (x86_64) 3.6.0 ifconfig bge0 gives Fatal trap 19.<br>
| Date: Tue, 3 Dec 2013 13:50:18 +0800<br>
<br>
> Sounds like ASF problem. Is it possible to disable ASF from BIOS?<br>
Do you mean Alert Standard Format ?<br>
I could not find any related words in BIOS setup, sorry.<br>
<br>
HP machines has iLO, Internal Light Out. Sub small CPU will<br>
monitor and control whole machine. (But not for Interrupt).<br>
<br>
Another thing I need to report is that<br>
dfly-i386-3.4.3_REL.img.bz2<br>
has the same situation.<br>
(To be honest, I'm quite new to DragonFlyBSD ;-)<br>
---<br>
Makoto Fujiwara,<br>
Chiba, Japan, Narita Airport and Disneyland prefecture.<br>
<br>
<br>
<br>
Copyright (c) 2003-2013 The DragonFly Project.<br>
Copyright (c) 1992-2003 The FreeBSD Project.<br>
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994<br>
The Regents of the University of California. All rights reserved.<br>
DragonFly v3.4.3-RELEASE #0: Wed Aug 28 01:55:49 UTC 2013<br>
root@:/usr/obj/usr/src/sys/GENERIC<br>
TSC clock: 2128021776 Hz, i8254 clock: 1193194 Hz<br>
CPU: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz (2128.02-MHz 686-class CPU)<br>
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11<br>
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE><br>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM><br>
AMD Features=0x20000000<LM><br>
AMD Features2=0x1<LAHF><br>
real memory = 1071670272 (1022 MB)<br>
avail memory = 1015721984 (968 MB)<br>
lapic: divisor index 0, frequency 133000530 Hz<br>
Initialize MI interrupts<br>
FQ scheduler policy version 1.1 loaded<br>
wdog: In-kernel automatic watchdog reset enabled<br>
kbd1 at kbdmux0<br>
disk scheduler: set policy of md0 to noop<br>
md0: Malloc disk<br>
ACPI: RSDP 0xf4f00 00024 (v02 HP )<br>
ACPI: XSDT 0x3fe667c0 00074 (v01 HP ProLiant 00000002 ?? 0000162E)<br>
ACPI: FACP 0x3fe66840 000F4 (v03 HP ProLiant 00000002 ?? 0000162E)<br>
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20110527/tbfadt-710)<br>
ACPI: DSDT 0x3fe66940 02D63 (v01 HP DSDT 00000001 INTL 20030228)<br>
ACPI: FACS 0x3fe66100 00040<br>
ACPI: SPCR 0x3fe66140 00050 (v01 HP SPCRRBSU 00000001 ?? 0000162E)<br>
ACPI: MCFG 0x3fe661c0 0003C (v01 HP ProLiant 00000001 00000000)<br>
ACPI: HPET 0x3fe66200 00038 (v01 HP ProLiant 00000002 ?? 0000162E)<br>
ACPI: SPMI 0x3fe66240 00040 (v05 HP ProLiant 00000001 ?? 0000162E)<br>
ACPI: ERST 0x3fe66280 001D0 (v01 HP ProLiant 00000001 ?? 0000162E)<br>
ACPI: APIC 0x3fe66480 00092 (v01 HP ProLiant 00000002 00000000)<br>
ACPI: FFFF 0x3fe66540 00176 (v01 HP ProLiant 00000001 ?? 0000162E)<br>
ACPI: BERT 0x3fe666c0 00030 (v01 HP ProLiant 00000001 ?? 0000162E)<br>
ACPI: HEST 0x3fe66700 000BC (v01 HP ProLiant 00000001 ?? 0000162E)<br>
npx0: <math processor> on motherboard<br>
npx0: INT 16 interface<br>
Using XMM optimized bcopy/copyin/copyout<br>
cryptosoft0: <software crypto> on motherboard<br>
acpi0: <HP ProLiant> on motherboard<br>
ACPI FADT: SCI testing interrupt mode ...<br>
ACPI FADT: SCI select level/high<br>
objcache_reclaimlist<br>
objcache_reclaimlist<br>
objcache_reclaimlist<br>
objcache_reclaimlist<br>
acpi0: Power Button (fixed)<br>
Warning: ACPI is disabling APM's device. You can't run both<br>
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0<br>
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0<br>
acpi_hpet0: frequency 14318180<br>
pcib0: <ACPI Host-PCI bridge> on acpi0<br>
pci0: <ACPI PCI bus> on pcib0<br>
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0<br>
pci21: <ACPI PCI bus> on pcib1<br>
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci21<br>
pci24: <ACPI PCI bus> on pcib2<br>
pcib2: No _PRT found, routing with pci<br>
pcib3: <MPTABLE PCI-PCI bridge> at device 4.0 on pci24<br>
pci25: <PCI bus> on pcib3<br>
ciss0: <HP Smart Array E200> port 0x4000-0x40ff mem 0xfdf70000-0xfdf77fff,0xfdf80000-0xfdffffff irq 16 at device 8.0 on pci24<br>
ciss0: PERFORMANT Transport<br>
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0<br>
pci18: <ACPI PCI bus> on pcib4<br>
pcib5: <ACPI PCI-PCI bridge> at device 28.0 on pci0<br>
pci2: <ACPI PCI bus> on pcib5<br>
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci2<br>
pci3: <ACPI PCI bus> on pcib6<br>
bge0: <Broadcom BCM5715 Gigabit Ethernet> mem 0xfdee0000-0xfdeeffff,0xfdef0000-0xfdefffff irq 16 at device 4.0 on pci3<br>
bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI<br>
miibus0: <MII bus> on bge0<br>
brgphy0: <BCM5714 10/100/1000baseT PHY> on miibus0<br>
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto<br>
bge0: MAC address: 00:24:81:00:91:14<br>
bge1: <Broadcom BCM5715 Gigabit Ethernet> mem 0xfdec0000-0xfdecffff,0xfded0000-0xfdedffff irq 17 at device 4.1 on pci3<br>
bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI<br>
miibus1: <MII bus> on bge1<br>
brgphy1: <BCM5714 10/100/1000baseT PHY> on miibus1<br>
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto<br>
bge1: MAC address: 00:24:81:00:91:15<br>
pcib7: <ACPI PCI-PCI bridge> at device 28.2 on pci0<br>
pci4: <ACPI PCI bus> on pcib7<br>
pcib8: <ACPI PCI-PCI bridge> at device 28.3 on pci0<br>
pci7: <ACPI PCI bus> on pcib8<br>
pcib9: <ACPI PCI-PCI bridge> at device 28.4 on pci0<br>
pci10: <ACPI PCI bus> on pcib9<br>
pcib10: <ACPI PCI-PCI bridge> at device 28.5 on pci0<br>
pci13: <ACPI PCI bus> on pcib10<br>
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1000-0x101f irq 21 at device 29.0 on pci0<br>
usb0: <Intel 82801I (ICH9) USB controller> on uhci0<br>
usb0: USB revision 1.0<br>
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0<br>
uhub0: 2 ports with 2 removable, self powered<br>
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1020-0x103f irq 21 at device 29.1 on pci0<br>
usb1: <Intel 82801I (ICH9) USB controller> on uhci1<br>
usb1: USB revision 1.0<br>
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1<br>
uhub1: 2 ports with 2 removable, self powered<br>
uhci2: <Intel 82801I (ICH9) USB controller> port 0x1040-0x105f irq 21 at device 29.2 on pci0<br>
usb2: <Intel 82801I (ICH9) USB controller> on uhci2<br>
usb2: USB revision 1.0<br>
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2<br>
uhub2: 2 ports with 2 removable, self powered<br>
uhci3: <Intel 82801I (ICH9) USB controller> port 0x1060-0x107f irq 21 at device 29.3 on pci0<br>
usb3: <Intel 82801I (ICH9) USB controller> on uhci3<br>
usb3: USB revision 1.0<br>
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3<br>
uhub3: 2 ports with 2 removable, self powered<br>
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdbf0000-0xfdbf03ff irq 21 at device 29.7 on pci0<br>
usb4: waiting for BIOS to give up control<br>
usb4: EHCI version 1.0<br>
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3<br>
usb4: <EHCI (generic) USB 2.0 controller> on ehci0<br>
usb4: USB revision 2.0<br>
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4<br>
uhub4: 8 ports with 8 removable, self powered<br>
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on uhub4<br>
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0<br>
pci1: <ACPI PCI bus> on pcib11<br>
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xfddf0000-0xfddfffff,0xd8000000-0xdfffffff irq 21 at device 2.0 on pci1<br>
pci1: <base peripheral> (vendor 0x0e11, dev 0xb203) at device 4.0 irq 22<br>
pci1: <base peripheral> (vendor 0x0e11, dev 0xb204) at device 4.2 irq 23<br>
uhci4: <UHCI (generic) USB controller> port 0x3800-0x381f irq 23 at device 4.4 on pci1<br>
usb5: <UHCI (generic) USB controller> on uhci4<br>
usb5: USB revision 1.0<br>
uhub5: <(0x103c) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5<br>
uhub5: 2 ports with 2 removable, self powered<br>
pci1: <serial bus> (vendor 0x103c, dev 0x3302) at device 4.6 irq 22<br>
isab0: <PCI-ISA bridge> at device 31.0 on pci0<br>
isa0: <ISA bus> on isab0<br>
atapci0: <Intel ICH9 SATA300 controller> port 0x10b0-0x10bf,0x10a0-0x10af,0x1098-0x109b,0x1090-0x1097,0x1088-0x108b,0x1080-0x1087 irq 20 at device 31.2 on pci0<br>
ata2: <ATA channel 0> on atapci0<br>
ata3: <ATA channel 1> on atapci0<br>
atapci1: <Intel ICH9 SATA300 controller> port 0x10f0-0x10ff,0x10e0-0x10ef,0x10d8-0x10db,0x10d0-0x10d7,0x10c8-0x10cb,0x10c0-0x10c7 irq 20 at device 31.5 on pci0<br>
ata4: <ATA channel 0> on atapci1<br>
ukbd0: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub5<br>
kbd2 at ukbd0<br>
ums0: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub5<br>
ums0: 3 buttons<br>
ukbd1: <CHICONY HP Basic USB Keyboard - JP, class 0/0, rev 1.10/3.00, addr 2> on uhub2<br>
kbd3 at ukbd1<br>
disk scheduler: set policy of acd0 to noop<br>
acd0: DVDROM <HL-DT-STDVD-ROM GDR-R10N/2.02> at ata4-master UDMA33<br>
ata5: <ATA channel 1> on atapci1<br>
acpi_tz0: <Thermal Zone> on acpi0<br>
[ACPI Debug] String [0x0B] "_CRT Method"<br>
[ACPI Debug] String [0x0B] "_PSV Method"<br>
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0<br>
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0<br>
device_probe_and_attach: atkbd0 attach returned 6<br>
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 on acpi0<br>
sio0: type 16550, console<br>
cpu0: <ACPI CPU> on acpi0<br>
cpu_cst0: <ACPI CPU C-State> on cpu0<br>
cpu1: <ACPI CPU> on acpi0<br>
cpu_cst1: <ACPI CPU C-State> on cpu1<br>
cpu2: <ACPI CPU> on acpi0<br>
cpu_cst2: <ACPI CPU C-State> on cpu2<br>
cpu3: <ACPI CPU> on acpi0<br>
cpu_cst3: <ACPI CPU C-State> on cpu3<br>
orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0<br>
pmtimer0 on isa0<br>
fdc0: ready for input in output<br>
fdc0: cmd 3 failed at out byte 1 of 3<br>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0<br>
sc0: <System console> at flags 0x100 on isa0<br>
sc0: VGA <16 virtual consoles, flags=0x100><br>
sio2 at port 0x2f8-0x2ff irq 3 on isa0<br>
sio2: type 16550A<br>
ppc0: parallel port not found.<br>
[ACPI Debug] String [0x0B] "_TMP Method"<br>
[ACPI Debug] String [0x0B] "_TMP Method"<br>
[ACPI Debug] String [0x0B] "_CRT Method"<br>
[ACPI Debug] String [0x0B] "_PSV Method"<br>
[ACPI Debug] String [0x0B] "_TMP Method"<br>
[ACPI Debug] String [0x0B] "_TMP Method"<br>
[ACPI Debug] String [0x0B] "_CRT Method"<br>
[ACPI Debug] String [0x0B] "_PSV Method"<br>
[ACPI Debug] String [0x0B] "_TMP Method"<br>
hpt27xx: no controller detected.<br>
CAM: Configuring 7 busses<br>
(probe31:umass-sim0:0:0:0): Uninitialized Transport 5:cea31380?<br>
CAM: finished configuring all busses<br>
disk scheduler: set policy of da0 to noop<br>
disk scheduler: set policy of da8 to noop<br>
disk scheduler: set policy of cd0 to noop<br>
da0 at ciss0 bus 0 target 0 lun 0<br>
da0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-5 device<br>
da0: Serial Number PA6C90P9SWW1Q2<br>
da0: 135.168MB/s transfers<br>
da0: Command Queueing Enabled<br>
da0: 228858MB (468702240 512 byte sectors: 255H 32S/T 57439C)<br>
da8 at umass-sim0 bus 0 target 0 lun 0<br>
da8: <Multi Flash Reader 1.00> Removable Direct Access SCSI-0 device<br>
da8: 40.000MB/s transfers<br>
da8: 7691MB (15751168 512 byte sectors: 255H 63S/T 980C)<br>
cd0 at ata2 bus 0 target 0 lun 0<br>
cd0: <HL-DT-ST DVD-ROM GDR-R10N 2.02> Removable CD-ROM SCSI-0 device<br>
cd0: 33.000MB/s transfers<br>
cd0: Attempt to query device size failed: NOT READY, Medium not present<br>
Mounting root from ufs:da8s1a<br>
DMA space used: 912k, remaining available: 16384k<br>
Mounting devfs<br>
Loading configuration files.<br>
Loading devfs rules: /etc/defaults/devfs.conf.<br>
Initializing random seed: done.<br>
Starting file system checks:<br>
/dev/da8s1a: FILESYSTEM CLEAN; SKIPPING CHECKS<br>
/dev/da8s1a: clean, 644567 free (327 frags, 80530 blocks, 0.0% fragmentation)<br>
<br>
Setting hostname: .<br>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384<br>
options=3<RXCSUM,TXCSUM><br>
inet 127.0.0.1 netmask 0xff000000<br>
inet6 ::1 prefixlen 128<br>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6<br>
Additional routing options:.<br>
hw.bus.devctl_disable: 0 -> 1<br>
Generating nsswitch.conf.<br>
Generating host.conf.<br>
Mounting NFS file systems:.<br>
Building databases...<br>
NFS CLIENT: access_cache_timeout=5 neg_cache_timeout=3.<br>
ELF ldconfig path: /usr/lib /usr/lib/compat /usr/pkg/lib /usr/local/lib<br>
[ACPI Debug] String [0x0B] "_TMP Method"<br>
Starting local daemons:.<br>
Updating motd.<br>
Configuring syscons: blanktime.<br>
sendmail_submit: /etc/mail/aliases.db not present, generating<br>
/etc/mail/aliases: 29 aliases, longest 10 bytes, 292 bytes total<br>
Additional ABI support:.<br>
Local package initialization:.<br>
Additional TCP options:.<br>
Starting pfi...<br>
Looking for pfi.conf on /dev/acd0...mount_cd9660: /dev/acd0: Invalid argument<br>
not found<br>
Looking for pfi.conf on /dev/cd0...mount_cd9660: /dev/cd0: Invalid argument<br>
not found<br>
Looking for pfi.conf on /dev/da0s1...mount_msdos: /dev/da0s1: Invalid argument<br>
not found<br>
Looking for pfi.conf on /dev/da8s1...mount_msdos: /dev/da8s1: Invalid argument<br>
not found<br>
<br>
Tue Dec 3 06:21:29 UTC 2013<br>
[ACPI Debug] String [0x0B] "_TMP Method"<br>
[ACPI Debug] String [0x0B] "_TMP Method"<br>
[ACPI Debug] String [0x0B] "_TMP Method"<br>
[ACPI Debug] String [0x0B] "_TMP Method"<br>
Welcome to DragonFly!<br>
<br>
To start the installer, login as 'installer'. To just get a shell prompt,<br>
login as 'root'.<br>
<br>
DragonFly/i386 (Amnesiac) (console)<br>
<br>
login: root<br>
Last login: Tue Dec 3 06:21:42 2013 on ttyv0<br>
Copyright (c) 2003-2013 The DragonFly Project.<br>
Copyright (c) 19[ACPI Debug] String [0x0B] "_TMP Method"<br>
92-2003 The FreeBSD Project.<br>
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994<br>
The Regents of the University of California. All rights reserved.<br>
<br>
DragonFly v3.4.3-RELEASE (GENERIC) #0: Wed Aug 28 01:55:49 UTC 2013<br>
<br>
Welcome to DragonFly!<br>
<br>
# ifconfig bge0 192.168.1.1<br>
NMI ISA a1, EISA ff<br>
RAM parity error, likely hardware failure.<br>
<br>
Fatal trap 19: non-maskable interrupt trap while in kernel mode<br>
cpuid = 0; <a href="http://lapic.id" target="_blank">lapic.id</a> = 00000000<br>
instruction pointer = 0x8:0xc0254cce<br>
stack pointer = 0x10:0xcf000cb8<br>
frame pointer = 0x10:0xff800000<br>
code segment = base 0x0, limit 0xfffff, type 0x1b<br>
= DPL 0, pres 1, def32 1, gran 1<br>
processor eflags = interrupt enabled, IOPL = 0<br>
current process = Idle<br>
current thread = pri 28 (CRIT)<br>
<- SMP: XXX<br>
kernel: type 19 trap, code=0<br>
<br>
CPU0 stopping CPUs: 0x0000000e<br>
stopped<br>
Stopped at bge_link_poll+0x23: testl %eax,0x6190(%ecx)<br>
db> trace<br>
bge_link_poll(0,182,0,ff8007f4,ce982d88) at bge_link_poll+0x23 0xc0254cce<br>
intr_info_ary(0,182,0,ff8007f4,ce982d88) at intr_info_ary+0x3004 0xc0a213c4<br>
intr_info_ary(0,182,0,ff8007f4,ce982d88) at intr_info_ary+0x3004 0xc0a213c4<br>
intr_info_ary(0,182,0,ff8007f4,ce982d88) at intr_info_ary+0x3004 0xc0a213c4<br>
...<br>
... (looks infinite)...<br>
<br>
<br>
<br>
</blockquote></div><br><br clear="all"><br>-- <br>Tomorrow Will Never Die
</div></div></div></div></div></div>