Problems with WLAN - iwm0 (solved)

Michael Neumann mneumann at ntecs.de
Tue Apr 21 02:07:14 PDT 2020


On Sun, Apr 19, 2020 at 01:34:26PM +0200, Michael Neumann wrote:
> Hi,
> 
> I can't get my WLAN working here with iwm0 on DragonFly 5.8.0. It always shows
> "status: no carrier". I double checked with a recent FreeBSD (12.1), and there,
> the same commands on the command line work. This is an open WLAN, I haven't
> tested it with wpa supplicant.  Note that on FreeBSD I have to explicitly
> specify the channel, otherwise I can't get it to work either.

On another thread Peeter gave a solution that also worked with my setup (iwm0):

# /etc/rc.conf

    wlans_iwm0="wlan0"
    ifconfig_wlan0="WPA"

# Or /etc/rc.conf with DHCP

    dhcpd_enable=YES
    wlans_iwm0="wlan0"
    ifconfig_wlan0="WPA DHCP"

# /etc/wpa_supplicant.conf

    network={
            ssid="my-ssid"
            key_mgmt=NONE
    }

# ifconfig wlan0

    wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
            inet6 fe80::7670:fdff:fefa:5a3c%wlan0 prefixlen 64 scopeid 0x3 
            ether 74:70:fd:fa:5a:3c
            groups: wlan 
            ssid my-ssid channel 9 (2452 MHz 11g) bssid c8:be:19:88:20:29
            country US authmode OPEN privacy OFF txpower 0 bmiss 10 scanvalid 60
            protmode CTS wme roaming MANUAL
            media: IEEE 802.11 Wireless Ethernet OFDM/36Mbps mode 11g
            status: associated


Thanks!

    Michael

> 
> Any ideas?
> 
> # dmesg | grep iwm0
> 
>     iwm0: hw rev 0x230, fw ver 22.361476.0, address 74:70:fd:fa:5a:3c
> 
> # kldstat
> 
>     Id Refs Address            Size     Name
>      1   12 0xffffffff80200000 1eb5520  kernel
>      2    1 0xffffffff820b6000 c8f8     ehci.ko
>      3    1 0xffffffff820c3000 cec0     xhci.ko
>      4    1 0xffffffff820d0000 11c50    dm.ko
>      5    1 0xffffffff820e2000 1d6b8    if_iwm.ko
>      6    1 0xffffffff82100000 1bb250   iwm8265fw.ko
> 
> # ifconfig wlan create wlandev iwm0 up
> 
>     wlan0: driver didn't set altq_maxlen
>     wlan0: MAC address: 74:70:fd:fa:5a:3c
>     wlan0
> 
> # ifconfig wlan0 scan
> 
>     SSID/MESH ID    BSSID              CHAN RATE   S:N     INT CAPS
>     my-ssid xx:xx:xx:xx:xx:xx    9   54M   0:0    100 E    HTCAP WME
> 
> # ifconfig wlan create wlandev iwm0 channel 9 ssid my-ssid up
> 
>     re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
>             options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
>             ether 80:fa:5b:62:db:72
>             media: Ethernet autoselect (none)
>             status: no carrier
>     lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>             options=43<RXCSUM,TXCSUM,RSS>
>             inet 127.0.0.1 netmask 0xff000000 
>             inet6 ::1 prefixlen 128 
>             inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 
>             groups: lo 
>     wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>             inet6 fe80::7670:fdff:fefa:5a3c%wlan0 prefixlen 64 scopeid 0x3 
>             ether 74:70:fd:fa:5a:3c
>             groups: wlan 
>             ssid my-ssid channel 9 (2452 MHz 11g)
>             country US authmode OPEN privacy OFF txpower 0 bmiss 10 scanvalid 60
>             protmode CTS wme bintval 0
>             media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
>             status: no carrier
> 
> Regards,
> 
>   Michael


More information about the Users mailing list