urtwn0 - driver didn't set altq_maxlen

[Ron Georgia]

All,

I have a USB Wifi adapter (MAC/BB RTL8188CUS, RF 6052 1T1R) that is 
having problems initializing. I did do some poking around and updated 
loader.conf (see below) but that does not seem to help. When I do and 
ifconfig wlan0 I see the SSID, but not IPv4, instead I see a "driver 
didn't set altq_maxlen" error. This is not a new USB adapter, maybe 3 or 
4 years old. I am able to scan the networks with ifconfig wlan0 scan, 
but I cannot connect to my home network (yes, the password is correct.) 
Not sure what might be needed. I can post my full dmesg in paste bin if 
that helps.

Some Info:

% ifconfig | grep -B3 -i wireless
     country US authmode WPA2/802.11i privacy ON deftxkey UNDEF
     AES-CCM 3:128-bit txpower 0 bmiss 7 scanvalid 60 protmode CTS wme
     roaming MANUAL
     media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11g

% sysctl net.wlan.devices
net.wlan.devices: urtwn0

filtered dmesg:

ess: 74:da:38:41:1c:68
rgeorgia at mini01% dmesg | grep urtw
urtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr 4> 
on usbus0
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
urtwn0: enabling 11n
urtwn-rtl8192cfwT: You need to read the LICENSE file in 
/usr/share/doc/legal/realtek/.
urtwn-rtl8192cfwT: If you agree with the license, set 
legal.realtek.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (urtwn_rtl8192cfwT_fw, ffffffff82b73fa0, 
0) error 1
urtwn-rtl8192cfwT: firmware image loaded, but did not register
urtwn0: failed loadfirmware of file urtwn-rtl8192cfwT
urtwn-rtl8192cfwT: could not load firmware image, error 17
urtwn0: failed loadfirmware of file urtwn-rtl8192cfwT
urtwn-rtl8192cfwT: could not load firmware image, error 17
urtwn0: failed loadfirmware of file urtwn-rtl8192cfwT
urtwn-rtl8192cfwT: could not load firmware image, error 17
urtwn0: failed loadfirmware of file urtwn-rtl8192cfwT
urtwn0: at uhub0, port 2, addr 4 (disconnected)
urtwn0: detached
urtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr 1> 
on usbus0
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
urtwn0: enabling 11n
urtwn0: at uhub0, port 2, addr 1 (disconnected)
urtwn0: detached
urtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr 7> 
on usbus0
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
urtwn0: enabling 11n
urtwn1: <vendor 0x0bda product 0x8176, class 0/0, rev 2.00/2.00, addr 8> 
on usbus0
urtwn1: MAC/BB RTL8188CUS, RF 6052 1T1R
urtwn1: enabling 11n
urtwn1: at uhub0, port 1, addr 8 (disconnected)
urtwn1: detached
urtwn1: <vendor 0x0bda product 0x8176, class 0/0, rev 2.00/2.00, addr 9> 
on usbus0
urtwn1: MAC/BB RTL8188CUS, RF 6052 1T1R
urtwn1: enabling 11n
urtwn0: at uhub1, port 3, addr 7 (disconnected)
urtwn0: detached
urtwn1: at uhub0, port 2, addr 9 (disconnected)
urtwn1: detached
urtwn0: <vendor 0x0bda product 0x8176, class 0/0, rev 2.00/2.00, addr 
10> on usbus0
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
urtwn0: enabling 11n
urtwn0: at uhub1, port 3, addr 10 (disconnected)
urtwn0: detached
urtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr 
11> on usbus0
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
urtwn0: enabling 11n
urtwn0: at uhub1, port 3, addr 11 (disconnected)
urtwn0: detached
urtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr 2> 
on usbus0
urtwn0: MAC/BB
urtwn0: enabling 11n
urtwn0: at uhub1, port 3, addr 2 (disconnected)
urtwn0: detached
urtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr 5> 
on usbus0
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
urtwn0: enabling 11n
urtwn0: at uhub0, port 2, addr 5 (disconnected)
urtwn0: detached
urtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr 1> 
on usbus0
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
urtwn0: enabling 11n
urtwn0: at uhub0, port 2, addr 1 (disconnected)
urtwn0: detached
urtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr 1> 
on usbus0
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
urtwn0: enabling 11n

/boot/loader.conf

vfs.root.mountfrom="hammer2:serno/50026B726B053990.s1d"
legal.realtek.license_ack=1
if_urtwn_load="YES"
urtwn-rtl8192cfwT_load="YES"
urtwn-rtl8192cfwU_load="YES"
urtwn-rtl8188eufw_load="YES"

-- 
“90% of my problems are due to ignorance, the other 10% is because I just don’t know any better.”