system crashing with 5.2 and 5.0 but not with 4.8

spuelmaschien at email.de spuelmaschien at email.de
Sat Feb 9 09:55:49 PST 2019


On 10/10/18 7:06 AM, Aaron LI wrote:
> On Sun, 7 Oct 2018 13:11:42 +0200
> spuelmaschien at email.de wrote:
>
>> Hallo,
>>
>> my HP Microserver N40L (Turion2) keeps crashing while or shortly after
>> installing any 5.x version of DragonFly.
>> I reinstalled 4.8 and this is running for several days now.
>>
>> A memcheck run from a KNOPPIX CD test was successfull.
>> KNOPPIX itself was also running for several days.
>>
>> Below are two ocr-ed screen photographs of these crashes. I do not know
>> how to keep that text in a more elegant way.
>>
>> Now this is kind of a dilemma.
>> - hardware ok -> run another OS
>> - hardware defect -> renew server, run dfly ...
>>
>> Hopefully there's a better solution.
>
> Hi Sascha,
>
> According to your panic log below, both were happened during the installation
> phase and related to the EHCI (USB 2.0).
>
> Did you use the same USB stick and the same USB port on the machine for 4.8,
> 5.0 and 5.2 installations?  If yes, this is a strange and serious bug.
>
> I don't remember there were any EHCI related changes after 4.8.  Maybe others
> have better knowledge about this.
>
>

Hallo Aaron,

Finally i did setup the external SATA port to install directly onto
the SSD which i used via a SATA - USB adapter taken from an
external harddisk.
Now it's running without any problems since then and is still running.
The SSD meanwhile went into the case.

For the external SATA port i had to find a modified BIOS for the HP
microserver. There are some fans who have the knowledge to modify
the BIOS and activate the port ...

Thank's for your useful hints.

Tschuess,
    Sascha









>> ================= 1 ======================
>> | /mnt/boot/kernel/radeonkmsfwTAHITI_rlc.ko copy-ok
>>
>> panic: Bad link elm 0xffffff8125709368 prev->next != elm
>> cpuid = 1
>> Trace beginning at frame 0xffffff81258d2870
>> panic() at panic+0x236 0xffffffff805ec136
>> panic() at panic+0x236 0xffffffff805ec136
>> _callout_stop() at _callout_stop+0x3c3 0xffffffff80610973
>> callout_reset[) at callout_reset+0x96 0xffffffff80610bd6
>> ehci_interrupt() at ehci_interrupt+0x198 0xffffffff821aa3d8
>> ithread_handler() at ithread_handler+0x2e9 0xffffffff805bal09
>> Debugger("panic")
>> CPU1 stopping CPUs: 0x00000001
>> stopped
>> Stopped at Debugger+0x7c: movb $0,0xd31929(%rip)
>> db> |
>> ================= 1 ======================
>>
>> ================= 2 ======================
>> ,-<<< Executing ‘/shin/newfs_hammer -f -L ROoT /dev/serno/2011090623F8.s2d'
>> panic: Bad link elm 0xfffff80125b47368 prev->next != elm
>> cpuid = 1
>> Trace beginning at frame 0xfffff80125ccbB870
>> panic() at panic+0x236 @xffffffff805f8666
>> panie() at panic+0x236 0xffffffff805f8666
>> _callout_stop() at _callout_stop+0x3d3 0xffffffff8061d803
>> callout_reset() at callout_reset+0x96 0xfffffff8061d916
>> ehci_interrupt() at ehei;interrupt+0x198 0xffffffff822973c8
>> ithread_handler() at ithread_handler+0x2e9 0xffffffff805c5d09
>> Debugger("panic")
>> CPU1 stopping CPUs: 0x00000001
>> stopped
>> Stopped at Debugger+0x7c: movb $0,0xe67a49(%rip)
>> db> |
>> ================= 2 ======================
>
>
> Cheers,
>



More information about the Users mailing list