Minnowboard Max

nans_nans1 at yahoo.de nans_nans1 at yahoo.de
Sat May 9 13:42:41 PDT 2015 

Hi,

i get up and running DFly on Minnowboard Max: http://www.minnowboard.org/meet-minnowboard-max/

But i get some curious "sdhci_pci0-slot0"-bootmessages (see the end at the following dmesg-output).
What's that supposed to mean? How can i fix this?

Best regards

Alex
________________________ 

Copyright (c) 2003-2014 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly v4.0.3-RELEASE #27: Thu Jan 22 17:19:56 PST 2015
    root at pkgbox64.dragonflybsd.org:/usr/obj/build/home/justin/src/sys/X86_64_GENERIC
TSC invariant clock: 1333345800 Hz, i8254 clock: 1193193 Hz
CPU: Intel(R) Atom(TM) CPU  E3825  @ 1.33GHz (1333.35-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x30679  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ENHMOVSB>
  Thermal and PM Features=0x5<SENSOR,ARAT>
  MONITOR/MWAIT Features=0x3<CST,INTBRK>
real memory  = 2059848704 (1964 MB)
avail memory = 1910788096 (1822 MB)
lapic: divisor index 0, frequency 66667077 Hz
Initialize MI interrupts
TSC testing MP synchronization ...
TSC is MP synchronized
TSC: cputimer freq 83334119, shift 4
VMM: IA32_FEATURE_CONTROL is not locked
FQ scheduler policy version 1.1 loaded
wdog: In-kernel automatic watchdog reset enabled
kbd0 at kbdmux0
disk scheduler: set policy of vn0 to noop
disk scheduler: set policy of vn1 to noop
disk scheduler: set policy of vn2 to noop
disk scheduler: set policy of vn3 to noop
disk scheduler: set policy of md0 to noop
md0: Malloc disk
ACPI: RSDP 0x00000000000F1C60 000024 (v02 CORE  )
ACPI: XSDT 0x000000007ACD80E0 00004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: FACP 0x000000007ACDB2A0 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000001)
ACPI: DSDT 0x000000007ACD8250 003049 (v02 COREv4 COREBOOT 20110725 INTL 20150204)
ACPI: FACS 0x000000007ACD8210 000040
ACPI: HPET 0x000000007ACDB3A0 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: APIC 0x000000007ACDB3E0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: MCFG 0x000000007ACDB440 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: SSDT 0x000000007ACDD480 0006BC (v02 CORE   COREBOOT 0000002A CORE 0000002A)
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS> on motherboard
padlock0: No ACE support.
rdrand0: <RdRand RNG> on motherboard
acpi0: <CORE COREBOOT> on motherboard
ACPI: All ACPI Tables successfully acquired
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x2040-0x2047 mem 0xc0000000-0xcfffffff,0xd0000000-0xd03fffff at device 2.0 on pci0
vgapci0: Boot video device
sdhci_pci0: <Generic SD HCI> mem 0xd0a09000-0xd0a09fff,0xd0a08000-0xd0a08fff irq 18 at device 18.0 on pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <MMC/SD bus> on sdhci_pci0
ahci0: <AHCI-PCI-SATA> port 0x2000-0x201f,0x205c-0x205f,0x2050-0x2057,0x2058-0x205b,0x2048-0x204f mem 0xd0a1d000-0xd0a1d7ff irq 19 at device 19.0 on pci0
ahci0: Intel hocus pocus
ahci0: AHCI 1.3 cap 0xcf20ff21<S64A,NCQ,SSS,SALP,SAL,SCLO,PMD,SSC,PSC,SXS> cap2 0x38, 2 ports, 32 tags/port, gen 2 (3Gbps)
ahci0.0: Caps 200004<ESP,POD>
ahci0.1: Caps 200004<ESP,POD>
ahci0.0: Found DISK "VB0250EAVER HPG9" serial="Z3THW2EA"
ahci0.0: tags=32/32 satacap=1506 satacap2=0004 satafea=0044 NCQ=YES capacity=238475.17MB
ahci0.0: f85=7069 f86=bc01 f87=4163 WC=enabled RA=enabled SEC=notsupp
ahci0.1: No device detected
pci0: <multimedia, audio> (vendor 0x8086, dev 0x0f28) at device 21.0 irq 21
pci0: <base peripheral, DMA controller> (vendor 0x8086, dev 0x0f40) at device 24.0 irq 17
pci0: <serial bus> (vendor 0x8086, dev 0x0f42) at device 24.2 irq 18
pci0: <serial bus> (vendor 0x8086, dev 0x0f46) at device 24.6 irq 18
pci0: <serial bus> (vendor 0x8086, dev 0x0f47) at device 24.7 irq 16
pci0: <encrypt/decrypt> (vendor 0x8086, dev 0x0f18) at device 26.0 irq 21
pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0xd0800000-0xd0803fff,0xd0900000-0xd0900fff irq 22 at device 0.0 on pci2
re0: Hardware rev. 0x4c000000; PCI-E 125MHz
miibus0: <MII bus> on re0
rgephy0: <RTL8251 media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
re0: MAC address: 00:13:20:fe:46:7b
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0a1d800-0xd0a1dbff irq 19 at device 29.0 on pci0
usbus0: EHCI version 1.0
usbus0: <EHCI (generic) USB 2.0 controller> on ehci0
pci0: <base peripheral, DMA controller> (vendor 0x8086, dev 0x0f06) at device 30.0 irq 17
pci0: <serial bus> (vendor 0x8086, dev 0x0f08) at device 30.1 irq 21
pci0: <serial bus> (vendor 0x8086, dev 0x0f09) at device 30.2 irq 19
pci0: <simple comms> (vendor 0x8086, dev 0x0f0a) at device 30.3 irq 20
pci0: <simple comms> (vendor 0x8086, dev 0x0f0c) at device 30.4 irq 21
pci0: <serial bus> (vendor 0x8086, dev 0x0f0e) at device 30.5 irq 19
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x0f12) at device 31.3 irq 22
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
perfbias0: <CPU perf-energy bias> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp0: Tj(target) value 110 does not seem right.
cpu1: <ACPI CPU> on acpi0
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
clockmod1: <CPU clock modulation> on cpu1
perfbias1: <CPU perf-energy bias> on cpu1
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp1: Tj(target) value 110 does not seem right.
orm0: <Option ROM> at iomem 0xee800-0xeffff on isa0
pmtimer0 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: can't drain, serial port might not exist, disabling
ppc0: cannot reserve I/O port range
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
hpt27xx: no controller detected.
disk scheduler: set policy of mmcsd0 to noop
mmcsd0: 7655MB <SDHC Memory Card> at mmc0 50MHz/4bit
CAM: Configuring 2 busses
CAM: finished configuring all busses
disk scheduler: set policy of da0 to noop
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA VB0250EAVER HPG9> Fixed Direct Access SCSI-4 device
da0: Serial Number Z3THW2EA
da0: 300.000MB/s transfers
da0: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
sdhci_pci0-slot0: Got AutoCMD12 error 0x0002
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x510f0800 | Version:  0x0000b502
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x00100800 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x01ff0000 | Host ctl: 0x00000007
sdhci_pci0-slot0: Power:    0x0000000f | Blk gap:  0x00000000
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000107
sdhci_pci0-slot0: Timeout:  0x0000000d | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x076864b2 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
uhub0: 8 ports with 8 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub1: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.17, addr 2> on usbus0
uhub1: 4 ports with 4 removable, self powered
no B_DEVMAGIC (bootdev=0)
ugen0.3: <CHICONY> at usbus0
ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 1.10/3.00, addr 3> on usbus0
kbd1 at ukbd0
Mounting root from hammer:da0s1d
HAMMER(ROOT) recovery check seqno=005f2355
HAMMER(ROOT) recovery range 300000001523fe50-300000001523fe50
HAMMER(ROOT) recovery nexto 300000001523fe50 endseqno=005f2356
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 8588k, remaining available: 16384k
Mounting devfs
sdhci_pci0-slot0: Got data interrupt 0x00600000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x510f0000 | Version:  0x0000b502
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000001
sdhci_pci0-slot0: Argument: 0x00000801 | Trn mode: 0x00000013
sdhci_pci0-slot0: Present:  0x01ff0000 | Host ctl: 0x00000006
sdhci_pci0-slot0: Power:    0x0000000f | Blk gap:  0x00000000
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000107
sdhci_pci0-slot0: Timeout:  0x0000000d | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x076864b2 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
sdhci_pci0-slot0: Got data interrupt 0x00600000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x510f0000 | Version:  0x0000b502
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000001
sdhci_pci0-slot0: Argument: 0x00100801 | Trn mode: 0x00000013
sdhci_pci0-slot0: Present:  0x013f0000 | Host ctl: 0x00000006
sdhci_pci0-slot0: Power:    0x0000000f | Blk gap:  0x00000000
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000107
sdhci_pci0-slot0: Timeout:  0x0000000d | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x076864b2 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================
sdhci_pci0-slot0: Got data interrupt 0x00600000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x510f0000 | Version:  0x0000b502
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000001
sdhci_pci0-slot0: Argument: 0x00d00801 | Trn mode: 0x00000013
sdhci_pci0-slot0: Present:  0x013f0000 | Host ctl: 0x00000006
sdhci_pci0-slot0: Power:    0x0000000f | Blk gap:  0x00000000
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000107
sdhci_pci0-slot0: Timeout:  0x0000000d | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: Caps:     0x076864b2 | Max curr: 0x00000000
sdhci_pci0-slot0: ===========================================

More information about the Users mailing list