HP Pavilion dv9000 notebook support

Erwin Geerdink mail at erwingeerdink.com
Sun Dec 29 06:51:30 PST 2013


Hi,

I'm new to DragonFlyBSD and tried to install the latest release on my
HP Pavilion dv9000 notebook using the appropriate 64 bit USB image.
When I boot from USB, the boot loader shows up, proceeds
loading the kernel modules acpi.ko, ehci.ko and then consistently
freezes at this point. Tried disabling ACPI, AHCI or EHCI using the
commands from the help page (when escaping to loader prompt) without
any effect.

I verified the md5 hash for the uncompressed usb image before writing
it to the device with dd. Recent releases of OpenBSD (which I currently
use) and FreeBSD work fine on this machine. The OpenBSD dmesg is
included below FYI.

Not sure if the statement "HP Pavilion dv7 laptops: as of 2012-07 it is
impossible to run DragonFly on them due to broken ACPI interrupt
routing in their firmware" from
http://www.dragonflybsd.org/docs/supportedhardware/
also applies to this machine.

I would really like to try out DBSD. The SMP and HAMMER features are
attractive and definitely worth a look, but I don't know if there's any
hope for this notebook as a testmachine. I'm aware DBSD does not focus
on notebook and desktop use, but as an amd64 architecture it should be
supported. Any suggestions?

Erwin


OpenBSD 5.3 (GENERIC.MP) #6: Tue Nov 12 09:13:27 CET 2013
    root at binpatch-53-amd64.mtier.org:/home/jasper/binpatchng/work-binpatch53-amd64/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2011496448 (1918MB)
avail mem = 1935515648 (1845MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0e20 (19 entries)
bios0: vendor Hewlett-Packard version "F.07" date 08/09/2007
bios0: Hewlett-Packard 30D1
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP TCPA SRAT SSDT MCFG HPET APIC BOOT SLIC
acpi0: wakeup devices PCI0(S5) USB0(S0) USB2(S0) Z017(S0) Z018(S0) MAC0
(S5) P2P0(S5) XVR0(S5) XVR1(S5) XVR3(S5) XVR4(S5) XVR5(S5) XVR6(S5) KBC0
(S3) MSE0(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at
acpi0 addr 0xe0000000, bus 0-4 acpihpet0 at acpi0: 25000000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55, 1800.42 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,3DNOWP
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 256KB
64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8
4MB entries fully associative cpu0: DTLB 32 4KB entries fully
associative, 8 4MB entries fully associative cpu0: apic clock running
at 200MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD
Athlon(tm) 64 X2 Dual-Core Processor TK-55, 1800.17 MHz cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,3DNOWP
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 256KB
64b/line 16-way L2 cache cpu1: ITLB 32 4KB entries fully associative, 8
4MB entries fully associative cpu1: DTLB 32 4KB entries fully
associative, 8 4MB entries fully associative ioapic0 at mainbus0: apid
2 pa 0xfec00000, version 11, 24 pins acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (P2P0) acpiprt2 at acpi0: bus -1 (XVR0)
acpiprt3 at acpi0: bus 4 (XVR1)
acpiprt4 at acpi0: bus 3 (XVR2)
acpiprt5 at acpi0: bus -1 (XVR3)
acpiprt6 at acpi0: bus -1 (XVR4)
acpiprt7 at acpi0: bus -1 (XVR5)
acpiprt8 at acpi0: bus -1 (XVR6)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, PSS
acpicpu1 at acpi0: PSS
acpitz0 at acpi0acpitz0: THRM: failed to read _CRT
: no critical temperature defined
acpibtn0 at acpi0: SLPB
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 not present
acpibtn1 at acpi0: LID_
acpibtn2 at acpi0: PWRB
acpivideo0 at acpi0: UVGA
acpivout0 at acpivideo0: LCD_
cpu0: PowerNow! K8 1800 MHz: speeds: 1800 1600 800 MHz
pci0 at mainbus0 bus 0
"NVIDIA MCP67 Memory" rev 0xa2 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA MCP67 ISA" rev 0xa2
nviic0 at pci0 dev 1 function 1 "NVIDIA MCP67 SMBus" rev 0xa2
iic0 at nviic0
iic1 at nviic0
spdmem0 at iic1 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic1 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
"NVIDIA MCP67 Memory" rev 0xa2 at pci0 dev 1 function 2 not configured
"NVIDIA MCP67 Co-processor" rev 0xa2 at pci0 dev 1 function 3 not
configured ohci0 at pci0 dev 2 function 0 "NVIDIA MCP67 USB" rev 0xa2:
apic 2 int 11, version 1.0, legacy support ehci0 at pci0 dev 2 function
1 "NVIDIA MCP67 USB" rev 0xa2: apic 2 int 7 usb0 at ehci0: USB revision
2.0 uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 4 function 0 "NVIDIA MCP67 USB" rev 0xa2: apic 2 int
5, version 1.0, legacy support ehci1 at pci0 dev 4 function 1 "NVIDIA
MCP67 USB" rev 0xa2: apic 2 int 10 usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
pciide0 at pci0 dev 6 function 0 "NVIDIA MCP67 IDE" rev 0xa1: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at
atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM
UJ-861H, 1.50> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode
4, DMA mode 2 pciide0: channel 1 ignored (disabled)
azalia0 at pci0 dev 7 function 0 "NVIDIA MCP67 HD Audio" rev 0xa1: apic
2 int 10 azalia0: codecs: Conexant CX20549
audio0 at azalia0
ppb0 at pci0 dev 8 function 0 "NVIDIA MCP67 PCI" rev 0xa2
pci1 at ppb0 bus 2
"Ricoh 5C832 Firewire" rev 0x05 at pci1 dev 5 function 0 not configured
sdhc0 at pci1 dev 5 function 1 "Ricoh 5C822 SD/MMC" rev 0x22: apic 2
int 11 sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x12 at pci1 dev 5 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x12 at pci1 dev 5 function 3 not
configured "Ricoh 5C852 xD" rev 0x12 at pci1 dev 5 function 4 not
configured pciide1 at pci0 dev 9 function 0 "NVIDIA MCP67 SATA" rev
0xa2: DMA pciide1: using apic 2 int 11 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <SAMSUNG HM321HI>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1 at pciide1 channel 1 drive 0: <WDC WD1200BEVS-60UST0>
wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
nfe0 at pci0 dev 10 function 0 "NVIDIA MCP67 LAN" rev 0xa2: apic 2 int
11, address 00:00:00:00:00:00 rlphy0 at nfe0 phy 1: RTL8201L 10/100
PHY, rev. 1 ppb1 at pci0 dev 12 function 0 "NVIDIA MCP67 PCIE" rev 0xa2
pci2 at ppb1 bus 4
ppb2 at pci0 dev 13 function 0 "NVIDIA MCP67 PCIE" rev 0xa2
pci3 at ppb2 bus 3
"Broadcom BCM4311" rev 0x02 at pci3 dev 0 function 0 not configured
vga1 at pci0 dev 18 function 0 vendor "NVIDIA", unknown product 0x0531
rev 0xa2 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core
rev BH-G1 isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.3
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
uvideo0 at uhub1 port 2 configuration 1 interface 0 "Chicony
Electronics Co., Ltd. HP Webcam" rev 2.00/6.06 addr 2 video0 at uvideo0
uhidev0 at uhub2 port 4 configuration 1 interface 0 "vendor 0x1bcf USB
Optical Mouse" rev 2.00/0.14 addr 2 uhidev0: iclass 3/1, 2 report ids
ums0 at uhidev0 reportid 1: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhid0 at uhidev0 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (6efc545957b69a15.a) swap on wd0b dump on wd0b



More information about the Users mailing list