(x86_64) 3.6.0 ifconfig bge0 gives Fatal trap 19.

Makoto Fujiwara makoto at ki.nu
Mon Dec 2 20:23:40 PST 2013


Hi, following is done on HP DL320/G5p 

1. Have USB bootimage written to USB memory stick.
     1998585856 Dec  2 22:03 dfly-x86_64-3.6.0_REL.img
2. (screen) Boot from it, and then
   Select boot console by 9
   OK set boot_serial
   OK boot
3. (screen) Login as root and edit /etc/ttys
   (delete the first line and copy ttyv0 line, and
     change the word ttyv0 to console; kill -1 1;)
4. Login from serial as root:
5. Type ifconfig bge0 192.168.1.1
   Then I have attached log:

(It says parity error, but the machine is OK with memory test
and boot fine for other OSen.)

Thanks again, 
---
Makoto Fujiwara, 
Chiba, Japan, Narita Airport and Disneyland prefecture.

--------------------
To start the installer, login as 'installer'.  To just get a shell prompt,
login as 'root'.

DragonFly/x86_64 (Amnesiac) (console)

login: root
Last login: Tue Dec  3 04:08:58 2013 on ttyv0
Copyright (c) 2003-2013 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Reg[ACPI Debug]  String [0x0B] "_TMP Method"
ents of the University of California. All rights reserved.

DragonFly v3.6.0-RELEASE (X86_64_GENERIC) #8: Fri Nov 22 13:22:00 PST 2013

Welcome to DragonFly!

# ifconfig bge0 192.168.1.1
NMI ISA b1, EISA ff
RAM parity error, likely hardware failure.

Fatal trap 19: non-maskable interrupt trap while in kernel mode
cpuid = 0; lapic->id = 00000000
instruction pointer     = 0x8:0xffffffff803ad9f4
stack pointer           = 0x10:0xffffffe0394f3840
frame pointer           = 0x10:0xffffffe0394f3870
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, long 0, def32 0, gran 1
processor eflags        = interrupt enabled, IOPL = 0
current process         = Idle
current thread          = pri 28 (CRIT)
kernel: type 19 trap, code=0

CPU0 stopping CPUs: 0x0000000e
 stopped
Stopped at      bge_miibus_readreg+0xed:        testl   $0x20000000,%r13d
db> trace
bge_miibus_readreg() at bge_miibus_readreg+0xed 0xffffffff803ad9f4
miibus_readreg() at miibus_readreg+0x43 0xffffffff804a0ec1
brgphy_service() at brgphy_service+0x412 0xffffffff804a3da7
mii_pollstat() at mii_pollstat+0x2f 0xffffffff804a136d
bge_copper_link_upd() at bge_copper_link_upd+0x20 0xffffffff803af847
bge_link_poll() at bge_link_poll+0x4d 0xffffffff803ad4a0
bge_intr() at bge_intr+0x4a 0xffffffff803aedf3
bge_intr_legacy() at bge_intr_legacy+0x81 0xffffffff803b10ba
lwkt_serialize_handler_call() at lwkt_serialize_handler_call+0x7a 0xffffffff80578856
ithread_handler() at ithread_handler+0x1d7 0xffffffff805356fb
db> 


More information about the Users mailing list