Installing DragonFly 2.0

Archimedes Gaviola archimedes.gaviola at gmail.com
Tue Jul 22 05:22:32 PDT 2008


Hi,

First of all, congratulations for this new release of DragonFly! I've
tried installing on my desktop PC but I encountered some errors while
adding software packages (checked all) but suddenly it prompts for
"Packages were successfully installed!". Below are the errors I've
encountered.

--------------------------------------------------------------------
/usr/pkg/bin/pkg_info: not found
/usr/pkg/bin/pkg_info: not found
/usr/pkg/bin/pkg_info: not found
/usr/pkg/bin/pkg_info: not found
/usr/pkg/bin/pkg_info: not found
/usr/pkg/bin/pkg_info: not found
,-<<< Executing `/usr/pkg/bin/pkg_create -b pkgdb.byfile.db
/mnt/tmp/pkgdb.byfile.db.tgz'
| /usr/pkg/bin/pkg_create: not found
`->>> Exit status: 127

[pressing Skip button]

,-<<< Executing `/usr/sbin/chroot /mnt/ /usr/pkg/bin/pkg_add /tmp/pkgdb.byfile.
b.tgz'
| chroot: /usr/pkg/bin/pkg_add: No such file or directory
`->>> Exit status: 1

[pressing Skip button]

,-<<< Executing `/bin/rm /mnt/tmp/pkgdb.byfile.db.tgz'
| rm: /mnt/tmp/pkgdb.byfile.db.tgz: No such file or directory
`->>> Exit status: 1

Packages were successfully installed!
-----------------------------------------------------------------

I also have the dmesg of my desktop PC which is an AMD Sempron (32-bit)

Copyright (c) 2003-2008 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly 2.0.0-RELEASE #1: Sat Jul 19 14:34:49 PDT 2008
    root at test12.backplane.com:/usr/obj/usr/src/sys/GENERIC
Calibrating clock(s) ... TSC clock: 1666710718 Hz, i8254 clock: 1197755 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD Sempron(tm)   2400+ (1639.73-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1
  Features=0x380a97b<FPU,VME,PSE,TSC,MSR,PAE,CX8,SEP,PGE,CMOV,MMX,FXSR,SSE>
  AMD Features=0x400000<AMIE>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory  = 134152192 (131008K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x007c8000 - 0x07fdffff, 125927424 bytes (30744 pages)
avail memory = 119144448 (116352K bytes)
pnpbios: Found PnP BIOS data at 0xc00f3c30
pnpbios: Entry = f0000:43ca  Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "/kernel" at 0xc079b000.
Preloaded elf module "/modules/acpi.ko" at 0xc079b1e8.
crypto: <crypto core>
wlan: <802.11 Link Layer>
md0: Malloc disk
Math emulator present
pci_open(1):    mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=71928086)
pcibios: No call entry point
pcibios: No call entry point
ACPI: RSDP @ 0x0xf52c0/0x0014 (v  0 ACPIAM)
ACPI: RSDT @ 0x0x7ff0000/0x002C (v  1 A M I  OEMRSDT  0x08000314 MSFT
0x00000097)
ACPI: FACP @ 0x0x7ff0200/0x0081 (v  2 A M I  OEMFACP  0x08000314 MSFT
0x00000097)
ACPI: DSDT @ 0x0x7ff0300/0x209B (v  1  AMIBI AMIBI002 0x00000002 INTL
0x02002026)
ACPI: FACS @ 0x0x7fff000/0x0040
ACPI: OEMB @ 0x0x7fff040/0x0053 (v  1 A M I  OEMBIOS  0x08000314 MSFT
0x00000097)
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
Using MMX optimized bcopy/copyin/copyout
npx0: <math processor> [attached!] on motherboard
acpi0.nexus0.root0
acpi0: <A M I OEMRSDT> [tentative] on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
AcpiOsDerivePciId: bus 0 dev 7 func 0
ACPI timer looks BAD  min = 29, max = 2495, width = 2466
ACPI timer looks BAD  min = 29, max = 69088, width = 69059
ACPI timer looks BAD  min = 29, max = 3476, width = 3447
ACPI timer looks BAD  min = 29, max = 9118, width = 9089
ACPI timer looks BAD  min = 29, max = 38724, width = 38695
ACPI timer looks BAD  min = 29, max = 3777, width = 3748
ACPI timer looks BAD  min = 28, max = 81415, width = 81387
ACPI timer looks BAD  min = 29, max = 6447, width = 6418
ACPI timer looks BAD  min = 29, max = 5416, width = 5387
ACPI timer looks BAD  min = 28, max = 78864, width = 78836
acpi_timer0.acpi0.nexus0.root0
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x408-0x40b on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x408-0x40b on acpi0
cpu0.acpi0.nexus0.root0
cpu0: <ACPI CPU> [tentative] on acpi0
cpu0: <ACPI CPU> [attached!] on acpi0
atkbdc0.acpi0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] port 0x64,0x60 irq 1 on acpi0
atkbd0.atkbdc0.acpi0.nexus0.root0
atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0
psm0: current command byte:0065
psm0.atkbdc0.acpi0.nexus0.root0
psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
atkbdc0: <Keyboard controller (i8042)> [attached!] port 0x64,0x60 irq 1 on acpi0
sio0: irq maps: 0x8000 0x8010 0x8000 0x8000
sio0.acpi0.nexus0.root0
sio0 [tentative] port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio0 [attached!] port 0x3f8-0x3ff irq 4 on acpi0
sio1: irq maps: 0x8000 0x8008 0x8000 0x8000
sio1.acpi0.nexus0.root0
sio1 [tentative] port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1 [attached!] port 0x2f8-0x2ff irq 3 on acpi0
unknown: not probed (disabled)
fdc0.acpi0.nexus0.root0
fdc0: <NEC 72065B or clone> [tentative] port 0x3f7,0x3f0-0x3f5 irq 6
drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0.fdc0.acpi0.nexus0.root0
fd0: <1440-KB 3.5" drive> [tentative] on fdc0 drive 0
fd0: <1440-KB 3.5" drive> [attached!] on fdc0 drive 0
fdc0: <NEC 72065B or clone> [attached!] port 0x3f7,0x3f0-0x3f5 irq 6
drq 2 on acpi0
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0.acpi0.nexus0.root0
ppc0 [tentative] port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0.ppc0.acpi0.nexus0.root0
ppbus0: <Parallel port bus> [tentative] on ppc0
plip0.ppbus0.ppc0.acpi0.nexus0.root0
plip0: <PLIP network interface> [tentative] on ppbus0
lp0: bpf attached
plip0: <PLIP network interface> [attached!] on ppbus0
lpt0.ppbus0.ppc0.acpi0.nexus0.root0
lpt0: <Printer> [tentative] on ppbus0
lpt0: Interrupt-driven port
lpt0: <Printer> [attached!] on ppbus0
ppi0.ppbus0.ppc0.acpi0.nexus0.root0
ppi0: <Parallel I/O> [tentative] on ppbus0
ppi0: <Parallel I/O> [attached!] on ppbus0
ppbus0: <Parallel port bus> [attached!] on ppc0
ppc0 [attached!] port 0x378-0x37f irq 7 on acpi0
unknown: not probed (disabled)
acpi0: <A M I OEMRSDT> [attached!] at irq 9 on motherboard
legacypci0.nexus0.root0
legacypci0 [tentative] on motherboard
pcib0.legacypci0.nexus0.root0
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> [tentative]
on legacypci0
pci0.pcib0.legacypci0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: pci_attach() physical bus=0
found-> vendor=0x8086, dev=0x7192, revid=0x03
        bus=0, slot=0, func=0
        class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
found-> vendor=0x8086, dev=0x7110, revid=0x01
        bus=0, slot=7, func=0
        class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
        map[20]: type 1, range 32, base 0000ffa0, size  4
found-> vendor=0x8086, dev=0x7111, revid=0x01
        bus=0, slot=7, func=1
        class=[STORAGE]01-01-80, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
found-> vendor=0x0000, dev=0x0000, revid=0x00
        bus=0, slot=7, func=2
        class=[OLD]00-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=d, irq=255
        map[90]: type 1, range 32, base 00000440, size  4
found-> vendor=0x8086, dev=0x7113, revid=0x02
        bus=0, slot=7, func=3
        class=[BRIDGE]06-80-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=255
        map[10]: type 1, range 32, base f8000000, size 26
found-> vendor=0x5333, dev=0x8811, revid=0x00
        bus=0, slot=8, func=0
        class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[10]: type 1, range 32, base 0000ec00, size  7
        map[14]: type 1, range 32, base febff000, size 12
found-> vendor=0x1011, dev=0x0009, revid=0x20
        bus=0, slot=10, func=0
        class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=11
isab0.pci0.pcib0.legacypci0.nexus0.root0
isab0: <Intel 82371AB PCI to ISA bridge> [tentative] at device 7.0 on pci0
isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <Intel 82371AB PCI to ISA bridge> [attached!] at device 7.0 on pci0
atapci0.pci0.pcib0.legacypci0.nexus0.root0
atapci0: <Intel PIIX4 UDMA33 controller> [tentative] port
0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on
pci0
ata0.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata0: <ATA channel 0> [tentative] on atapci0
atapci0: reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
ad0: setting PIO4 on PIIX4 chip
ad0: setting WDMA2 on PIIX4 chip
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ad0: 16383MB <Virtual HD 1. 1> at ata0-master WDMA2
ad0: 33554304 sectors [33288C/16H/63S] 1 sectors/interrupt 1 depth queue
ata0: <ATA channel 0> [attached!] on atapci0
ata1.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata1: <ATA channel 1> [tentative] on atapci0
atapci0: reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
acd0: setting PIO4 on PIIX4 chip
acd0: <Virtual CD/> DVDROM drive at ata1 as master
acd0:  128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, lock protected
acd0: Medium: CD-ROM unknown
ata1: <ATA channel 1> [attached!] on atapci0
atapci0: <Intel PIIX4 UDMA33 controller> [attached!] port
0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on
pci0
pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 7.2
pci0: <Intel 82371AB Power management controller> (vendor=0x8086,
dev=0x7113) at 7.3
pci0: <S3 Trio graphics accelerator> (vendor=0x5333, dev=0x8811) at 8.0
de0.pci0.pcib0.legacypci0.nexus0.root0
de0: <Digital 21140A Fast Ethernet> [tentative] port 0xec00-0xec7f mem
0xfebff000-0xfebfffff irq 11 at device 10.0 on pci0
de0: 21140A [10-100Mb/s] pass 2.0
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
de0: bpf attached
de0: MAC address: 00:03:ff:d2:35:a0
de0: <Digital 21140A Fast Ethernet> [attached!] port 0xec00-0xec7f mem
0xfebff000-0xfebfffff irq 11 at device 10.0 on pci0
pci0: <PCI bus> [attached!] on pcib0
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> [attached!]
on legacypci0
legacypci0 [attached!] on motherboard
ex_isa_identify()
ahc_isa_probe 14: ioport 0xec00 alloc failed
fdc-: fdc0 exists, using next available unit number
atkbdc-: atkbdc0 exists, using next available unit number
sio-: sio0 exists, using next available unit number
sio-: sio1 exists, using next available unit number
sio-: sio2 exists, using next available unit number
sio-: sio3 exists, using next available unit number
ppc-: ppc0 exists, using next available unit number
Trying Read_Port at 203
PNPb003: adding irq mask 0x20
PNPb003: adding dma mask 0x2
PNPb003: adding dma mask 0x20
PNPb003: adding fixed io range 0x220-0x22f, size=0x10, align=0x1
PNPb003: adding fixed io range 0x380-0x38f, size=0x10, align=0x1
PNPb02f: adding fixed io range 0x201-0x201, size=0x1, align=0x1
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
pmtimer0 [tentative] on isa0
pmtimer0 [attached!] on isa0
fdc1: cannot reserve I/O port range
fdc1 [tentative] failed to probe at port 0x3f0 irq 6 drq 2 on isa0
adv0 [tentative] failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 [tentative] failed to probe at port 0x134-0x137 on isa0
aic0 [tentative] failed to probe at port 0x140-0x15f on isa0
atkbdc1: <Keyboard controller (i8042)> [tentative] failed to probe at
port 0x60 on isa0
vga0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 03 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 03 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
sio2 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio3 [tentative] failed to probe at port 0x2f8 irq 3 on isa0
sio4: not probed (disabled)
sio5: not probed (disabled)
ppc1: parallel port found at 0x378
ppc1: cannot reserve I/O port range
ppc1: <Parallel port> [tentative] failed to probe at port 0x378-0x37f
irq 7 on isa0
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x220 specified. Nearest valid baseport is
0x230.  Failing probe.
unknown: <Sound Blaster 16> [tentative] failed to probe at port
0x220-0x22f,0x380-0x38f irq 5 drq 1,5 on isa0
adv1: Invalid baseport of 0x201 specified. Nearest valid baseport is
0x210.  Failing probe.
unknown: <Game Port> [tentative] failed to probe at port 0x201-0x210 on isa0
BIOS Geometries:
 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
de0: enabling 100baseTX port
faith0: bpf attached
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
lo0: bpf attached
ppp0: bpf attached
sl0: bpf attached
(probe0:ata1:0:0:0): error 6
(probe0:ata1:0:0:0): Unretryable Error
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <MS C/DVD-ROM 3.0> Removable CD-ROM SCSI-0 device
pass0: 16.000MB/s transfers
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MS C/DVD-ROM 3.0> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
bootdev: a0200000 type=0 unit=0 slice=2 part=0 major=3
ATA PseudoRAID loaded
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 10239263, size 10239201 : OK
start_init: trying /sbin/init

-----------------------------------------------------------------------------------------------------

Lastly, since I do have dual-stack network, IPv4 and IPv6 works fine
with it. My desktop have successfully acquired IPv4 though our DHCP
server while it also successfully received IPv6 address through IPv6
router advertisement from our IPv6 gateway when I enable IPv6 in the
rc.conf. Since you've supported IPv6, is it okay if we can enable IPv6
during installation? wherein a user can add static IPv6 address on the
interface or by doing router solicitation for stateless
auto-configuration. Another is for the network boot installation for
PXE, it is also better if we can have IPv6 on it.

Thanks,
Archimedes





More information about the Users mailing list