USB memory stick

FloW flo.w at gmx.net
Sun Sep 10 13:49:08 PDT 2006


Hi guys

First of all - I've been following the DragonflyBSD project now for 
quite some time via the 'stable' preview tags and it is probably the 
most innovative OSS project in the operating system world. Go on!

Now to my problem - I recently bought a USB memory stick, and it works 
with both Windows and FreeBSD. When I boot DragonflyBSD the error 
messages are something like:

uhub4: 1 port with 0 removable, self powered
uhub4: cannot open interrupt pipe
device_probe_and_attach: uhub4 attach returned 6
surrounded by lots of stray interrupt messages like:

sched_ithd: stray interrupt 7

The MB is based on NForce3 chipset (which is buggy, I know) and the 
memory stick is a Corsair Flash Voyager 4GB. I've tried both ehci in 
kernel and as a module - no go. Any ideas?

Regards

FloW


Copyright (c) 2003, 2004, 2005, 2006 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.7.0-PREVIEW #0: Thu Aug 31 00:44:17 CEST 2006
    flo at alpha:/usr/obj/usr/src/sys/FLOW
TSC clock: 1994766974 Hz, i8254 clock: 1193130 Hz
CPU: AMD Athlon(tm) 64 Processor 3000+ (1994.86-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0xf48  Stepping = 8
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500000<<b20>,AMIE,<b29>,DSP,3DNow!>
real memory  = 1073676288 (1048512K bytes)
avail memory = 1030107136 (1005964K bytes)
Preloaded elf kernel "/kernel" at 0xc079b000.
Preloaded elf module "/modules/if_nv.ko" at 0xc079b260.
Preloaded elf module "/modules/miibus.ko" at 0xc079b308 (ignored, already in static kernel)
Preloaded elf module "/modules/snd_emu10k1.ko" at 0xc079b3b0.
Preloaded elf module "/modules/snd_pcm.ko" at 0xc079b45c.
Preloaded elf module "/modules/ehci.ko" at 0xc079b504.
Preloaded elf module "/modules/acpi.ko" at 0xc079b5ac.
sched_ithd: stray interrupt 7
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00fdf00
sched_ithd: stray interrupt 7
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <XPC AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
compare 0
compare 0
compare 0
compare 0
legacypci0 on motherboard
pcib0: <Host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
agp0: <NVIDIA Generic AGP Controller> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
agp0: Unable to find NVIDIA Memory Controller 1.
device_probe_and_attach: agp0 attach returned 19
isab0: <PCI to ISA bridge (vendor=10de device=00d0)> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <unknown card> (vendor=0x10de, dev=0x00d4) at 1.1 irq 10
ohci0: <nVidia nForce3 USB Controller> mem 0xec001000-0xec001fff irq 11 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <nVidia nForce3 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1: Prolific Technology Inc. USB Embedded Hub, class 9/0, rev 2.00/1.00, addr 2
uhub1: 1 port with 0 removable, self powered
umass0: Prolific Technology Inc. USB Mass Storage Device, rev 2.00/1.00, addr 3
ohci1: <nVidia nForce3 USB Controller> mem 0xec002000-0xec002fff irq 11 at device 2.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <nVidia nForce3 USB Controller> on ohci1
usb1: USB revision 1.0
uhub2: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
umass1: Ltd Winter Ver1.3, rev 1.10/0.05, addr 2
ehci0: <NVIDIA nForce3 USB 2.0 controller> mem 0xec003000-0xec0030ff irq 11 at device 2.2 on pci0
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <NVIDIA nForce3 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub3: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
uhub4: Prolific Technology Inc. USB Embedded Hub, class 9/0, rev 2.00/1.00, addr 2
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
uhub4: 1 port with 0 removable, self powered
uhub4: cannot open interrupt pipe
device_probe_and_attach: uhub4 attach returned 6
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
uhub4: Prolific Technology Inc. USB Embedded Hub, class 9/0, rev 2.00/1.00, addr 2
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
uhub4: 1 port with 0 removable, self powered
uhub4: cannot open interrupt pipe
device_probe_and_attach: uhub4 attach returned 6
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 15
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
umass2: Ltd Winter Ver1.3, rev 2.00/0.05, addr 3
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
sched_ithd: stray interrupt 7
nv0: <NVIDIA nForce MCP3 Networking Adapter> port 0xc000-0xc007 mem 0xec000000-0xec000fff irq 10 at device 5.0 on pci0
miibus0: <MII bus> on nv0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
nv0: MAC address: 00:30:1b:b0:f5:fb
atapci0: <nVIDIA nForce3 ATA133 controller> port 0xf000-0xf00f at device 8.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcib1: <PCI to PCI bridge (vendor=10de device=00dd)> at device 10.0 on pci0
pci1: <PCI bus> on pcib1
pcm0: <Creative EMU10K1> port 0x9000-0x901f irq 3 at device 5.0 on pci1
pcm0: <SigmaTel STAC9708/11 AC97 Codec>
fwohci0: <VIA Fire II (VT6306)> port 0x9800-0x987f mem 0xeb001000-0xeb0017ff irq 9 at device 6.0 on pci1
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:30:1b:b0:00:00:f6:5f
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
fwe0: MAC address: 02:30:1b:00:f6:5f
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci1: <SiI 3512 SATA controller> port 0xac00-0xac0f,0xa800-0xa803,0xa400-0xa407,0xa000-0xa003,0x9c00-0x9c07 mem 0xeb000000-0xeb0001ff irq 11 at device 7.0 on pci1
ata2: at 0x9c00 on atapci1
ata3: at 0xa400 on atapci1
pcib2: <PCI to PCI bridge (vendor=10de device=00d2)> at device 11.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <ATI model 4151 graphics accelerator> at 0.0 irq 5
pci2: <ATI model 4171 graphics accelerator> at 0.1
orm0: <Option ROMs> at iomem 0xc0000-0xccfff,0xd0000-0xd7fff,0xd8000-0xd97ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: can't drain, serial port might not exist, disabling
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 152627MB <SAMSUNG SP1614N> [310101/16/63] at ata0-master UDMA100
acd0: DVD-ROM <PLEXTOR DVD-ROM PX-116A2 0100> at ata1-master PIO4
uhub1: at uhub0 port 1 (addr 2) disconnected
umass1: at uhub2 port 1 (addr 2) disconnected
umass0: detached
umass1: detached
uhub1: detached
Mounting root from ufs:/dev/ad0s2a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <PLEXTOR DVD-ROM PX-116A2 1.00> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at umass-sim2 bus 2 target 0 lun 0
da0: <USB2.0 CardReader CF RW 0.0>> Removable Direct Access SCSI-0 device 
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim2 bus 2 target 0 lun 1
da1: <USB2.0 CardReader Combo 0.0>> Removable Direct Access SCSI-0 device 
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled




More information about the Users mailing list