cdparanoia and cdda2wav choking on last track of enhanced CD's

[Kyle Butt]

I'm having a problem with cdparanoia and cdda2wav choking on enhanced CD's.

It gets past the audio part of the last track before data, and it ends
up with this.

CDB:  BE 04 00 02 D8 F2 00 00 1A 10 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 300s
cdda2wav: Input/output error. ReadCD MMC 12: scsi sendcmd: retryable error

cdda2wav also fails to detect my cds as cd-extra.

Has anyone seen this before? It's on an ata dvd drive, I also get
similar behavior on my usb cd burner.

Here's some info on my system.

Is this just a known issue with cdparanoia? I did some googling, and I
saw some old
articles about linux having this problem around 2.3, but I haven't
seen anything recent or related to bsd.

Any Ideas?

> uname -a
DragonFly Fred. 1.1-CURRENT DragonFly 1.1-CURRENT #0: Mon Oct 25
09:45:43 PDT 2004
root at xxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC  i386

Here's my dmesg

Copyright (c) 2003, 2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.1-CURRENT #0: Mon Oct 25 09:45:43 PDT 2004
    root at xxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
TSC clock: 2793128840 Hz, i8254 clock: 1193159 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2793.20-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 536281088 (523712K bytes)
avail memory = 510644224 (498676K bytes)
Preloaded elf kernel "/kernel" at 0xc0660000.
Preloaded elf module "/modules/acpi.ko" at 0xc0660288.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00feae0
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <DELL GX270  > on motherboard
installed MI handler for int 9
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> mem 0xe8000000-0xebffffff at
device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=2571)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0181 graphics accelerator> at 0.0 irq 11
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xff80-0xff9f
irq 11 at device 29.0 on pci0
installed MI handler for int 11
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xff60-0xff7f
irq 10 at device 29.1 on pci0
installed MI handler for int 10
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
umass0: Behavior Tech. Computer USB 2.0 Storage Device, rev 2.00/1.03, addr 2
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xff40-0xff5f
irq 9 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xff20-0xff3f
irq 11 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ums0: Logitech Trackball, rev 1.10/2.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
pci0: <USB controller> at 29.7 irq 7
pcib2: <Intel 82801BA/CA/DB/EB/FB (ICH2/3/4/5/6) Hub to PCI bridge> at
device 30.0 on pci0
pci2: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port
0xdf40-0xdf7f mem 0xfcfe0000-0xfcffffff irq 9 at device 12.0 on pci2
em0: MAC address: 00:0d:56:fa:3b:de
em0: Speed: N/A, Duplex:N/A
isab0: <PCI to ISA bridge (vendor=8086 device=24d0)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 ATA100 controller> port
0xffa0-0xffaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem
0xfebffc00-0xfebfffff irq 9 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
atapci1: <Intel ICH5 SATA150 controller> port
0xfea0-0xfeaf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07
irq 9 at device 31.2 on pci0
ata2: at 0xfe00 on atapci1
ata3: at 0xfe20 on atapci1
pci0: <unknown card> (vendor=0x8086, dev=0x24d3) at 31.3 irq 5
pci0: <unknown card> (vendor=0x8086, dev=0x24d5) at 31.5 irq 5
orm0: <Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
installed MI handler for int 0
ad0: 76319MB <ST380023A> [155061/16/63] at ata0-master UDMA100
ad3: 5495MB <Maxtor 90576D4> [11166/16/63] at ata1-slave UDMA33
acd0: DVD-ROM <SAMSUNG DVD-ROM SD-616T> at ata1-master PIO4
Mounting root from ufs:/dev/ad3s1a
cd1 at ata1 bus 0 target 0 lun 0
cd1: <SAMSUNG DVD-ROM SD-616T F310> Removable CD-ROM SCSI-0 device 
cd1: 16.000MB/s transfers
cd1: cd present [279254 x 2048 byte records]
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <CDWRITER IDE5232 0009> Removable CD-ROM SCSI-0 device 
cd0: 1.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not
present - tray closed
ntfs_inactive: pushing active: 0xc181f378: type VREG, usecount 1,
writecount 0, refcount 0,
	ntfs_inactive: pushing active: 0xc181f458: type VREG, usecount 1,
writecount 0, refcount 0,
	
em0: Link is up 100 Mbps Full Duplex