New installation

Tue Feb 3 03:21:39 PST 2004

Hello

I've just built my first installation of DragonFly yesterday :)

Everything went very smooth, though I have some questions (I'm still
catching up with the mailing list archives, so sorry if any of this has
been brought up already).

First, is it enough (and safe) to set CCVER=gcc3 on /etc/make.conf and
rebuild eveything to start using gcc3 as the default compiler?

Second, here is one line from my dmesg which I found strange (the
full dmesg is at the bottom):

  WARNING: "ad" is usurping "ad"'s cdevsw[]

Well, that's it... I just want to thank you guys for the great work.
I've been learning a lot just by reading the news archive.

Best regards,
Andre

dmesg follows (sorry for the long lines):

Copyright (c) 2003-2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly 1.0-CURRENT #0: Mon Feb  2 21:33:44 BRST 2004
    root at homesick:/usr/obj/usr/src/sys/GENERIC
CPU: AMD Athlon(tm) Processor (908.09-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x642  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
  AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory  = 134201344 (131056K bytes)
avail memory = 121798656 (118944K bytes)
Preloaded elf kernel "/kernel" at 0xc0589000.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00f1620
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <VIA 8363 (Apollo KT133) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd800-0xd80f at device 7.1 on pci0
atapci0: Correcting VIA config for southbridge data corruption bug
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 7.2 on pci0
installed MI handler for int 9
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 9 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xa400-0xa4ff mem 0xf3800000-0xf38000ff irq 11 at device 13.0 on pci0
installed MI handler for int 11
vr0: Ethernet address: 00:e0:7d:f7:7d:1e
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sio0: <3COM PCI FaxModem> port 0xa000-0xa007 irq 10 at device 14.0 on pci0
sio0: moving to sio4
sio4: type 16550A
installed MI handler for int 10
pci0: <unknown card> (vendor=0x1102, dev=0x0002) at 15.0 irq 5
pci0: <unknown card> (vendor=0x1102, dev=0x7002) at 15.1
orm0: <Option ROM> at iomem 0xc0000-0xca7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
installed MI handler for int 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
installed MI handler for int 3
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
installed MI handler for int 7
installed MI handler for int 0
ad0: 19092MB <ST320413A> [38792/16/63] at ata0-master UDMA100
WARNING: "ad" is usurping "ad"'s cdevsw[]
ad1: 4103MB <ST34321A> [8894/15/63] at ata0-slave UDMA33
acd0: CDROM <ATAPI CDROM> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <ATAPI CD-ROM  MARY500 1.11> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present