[DragonFlyBSD - Bug #2952] vkernel crashes during boot

bugtracker-admin at leaf.dragonflybsd.org bugtracker-admin at leaf.dragonflybsd.org
Wed Sep 21 07:37:33 PDT 2016


Issue #2952 has been updated by zhtw.


Booting with -v gives exactly the same output.
addr2line doesn't seem to recognize the line:

a at kl:/usr/src$ sudo addr2line -f -e /var/vkernel/4.6-p/boot/kernel/kernel 0x6ef9b9
.mcount
??:?

After cherry-picking the two commits it still doesn't work, but addr2line shows something different:
a at kl:/usr/src$ sudo addr2line -f -e /var/vkernel/4.6-p-cherry/boot/kernel/kernel 0x6ef9b9
time
??:?

But could you check if I did everything right (I don't have much experience in all this):

a at kl:/usr/src$ git branch
  DragonFly_RELEASE_3_8
  DragonFly_RELEASE_4_0
  DragonFly_RELEASE_4_2
  DragonFly_RELEASE_4_4
* DragonFly_RELEASE_4_6
  master
a at kl:/usr/src$ git status | head -n 2
On branch DragonFly_RELEASE_4_6
Your branch is ahead of 'origin/DragonFly_RELEASE_4_6' by 2 commits.
a at kl:/usr/src$ git log -n 2
commit 49c5ab8692483d2ec472789f02823714859a81ba
Author: Antonio Huete Jimenez <tuxillo at quantumachine.net>
Date:   Wed Sep 21 01:31:58 2016 +0200

    vkernel - Invalidate pte before setting attributes to the vm_page

    - Fixes a problem at mountroot time where it doesn't find any disk
      even though the disk is detected earlier.

commit 2ea5d46f3046bdaa05c13c93f357b16170c14461
Author: Antonio Huete Jimenez <tuxillo at quantumachine.net>
Date:   Wed Sep 21 00:03:05 2016 +0200

    vkernel - Fix a vkernel lockup on startup

    - During ap_init() any pending IPIs is processed manually so
      clear gd_npoll as the real kernel does.
    - Do not disable interrupts for vkernels during lwkt_send_ipiq3()
      because they don't seem to be re-enabled afterwards as they should.
      I'm not entirely sure this is the right fix, more investigation
      is required.

Build command was: make -DNO_MODULES CONFIGARGS=-p buildkernel KERNCONF=VKERNEL64 -j 4

Install command: make -DNO_MODULES installkernel CONFIGARGS=-p KERNCONF=VKERNEL64 DESTDIR=/var/vkernel/4.6-p-cherry

So this all was with CONFIGARGS=-p.

But when compiled without it, it started to work. Thanks!


----------------------------------------
Bug #2952: vkernel crashes during boot
http://bugs.dragonflybsd.org/issues/2952#change-12984

* Author: zhtw
* Status: Feedback
* Priority: Normal
* Assignee: tuxillo
* Category: vkernel
* Target version: 
----------------------------------------
Can't start vkernel no my 4.6 machine:

a at kl:~$ uname -a
DragonFly kl.zta.lk 4.6-RELEASE DragonFly v4.6.0.10.g16fba-RELEASE #10: Wed Aug 17 14:26:31 CEST 2016     root at kl.zta.lk:/usr/obj/usr/src/sys/X86_64_GENERIC  x86_64
@kl:~$ sudo /var/vkernel/4.6/boot/kernel/kernel -m 2g -r /vhost/dev/root.img -I auto:bridge0 -d -p /var/run/vkernel.
vhost-dev.pid
Wachtwoord:
Using memory file: /var/vkernel/memimg.000003
KVM mapped at 0x8000000000-0x10000000000
TAP UNIT 7
Copyright (c) 2003-2016 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly v4.6.0.20.ged336-RELEASE #16: Wed Sep 21 14:46:27 CEST 2016
    root at kl.zta.lk:/usr/obj/usr/src/sys/VKERNEL64
real memory = 2147483648 (2097152K bytes)
avail memory = 2027917312 (1980388K bytes)


Fatal trap 12: page fault while in kernel mode
cpuid = 0
fault virtual address   = 0x9
fault code              = supervisor read, page not present
instruction pointer     = 0x2b:0x6ef9b9
stack pointer           = 0x10:0x7fffffffe6f0
frame pointer           = 0x10:0x1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 0 ()
current thread          = pri 12
 <- SMP: XXX
kernel: type 12 trap, code=0

CPU0 stopping CPUs: 0x0000000000000000
 stopped
Stopped at      0x6ef9b9:       movq    0x8(%rbp),%rdi
db>

Interestingly, I was able to start the 4.4 vkernel some time ago, but I recently recompiled it and it started to crash the same way 4.6 does. I still have access to my working 4.4 vkernel, but don't know what to compare to see the difference.




-- 
You have received this notification because you have either subscribed to it, or are involved in it.
To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account



More information about the Bugs mailing list