[DragonFlyBSD - Bug #2529] Sundance network adapter is not detected and attached

Sepherosa Ziehau via Redmine bugtracker-admin at leaf.dragonflybsd.org
Thu Mar 21 18:38:15 PDT 2013


Issue #2529 has been updated by sepherosa.


On Thu, Mar 21, 2013 at 10:13 PM, Volodymyr Kostyrko via Redmine
<bugtracker-admin at leaf.dragonflybsd.org> wrote:
>
> Issue #2529 has been reported by kworr.
>
> ----------------------------------------
> Bug #2529: Sundance network adapter is not detected and attached
> http://bugs.dragonflybsd.org/issues/2529
>
> Author: kworr
> Status: New
> Priority: Low
> Assignee:
> Category:
> Target version:
>
>
> I have one of those ASUS NX1001 cards with Sundance controller. Current version doesn't correctly detects it.

Please test the latest master:
af3cc6ae269ab98cdf5a8347aaf5d857bc10a1a7

Should work now.

>
> pciconf -lv (snip):
> none6 at pci0:2:6:0:       class=0x020000 card=0x82131043 chip=0x020013f0 rev=0x31 hdr=0x00
>     vendor     = 'Sundance Technology Inc / IC Plus Corp'
>     device     = 'IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY'
>     class      = network
>     subclass   = ethernet
>
> In current FreeBSD (RELENG_9) it is detected as:
>
> ste0: <Sundance ST201 10/100BaseTX> port 0xd100-0xd17f mem 0xfe920000-0xfe9201ff irq 20 at device 6.0 on pci2
> ste0: Ethernet address: 00:26:18:eb:37:85
> miibus1: <MII bus> on ste0
> ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus1
> ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>
>
> --
> You have received this notification because you have either subscribed to it, or are involved in it.
> To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account



--
Tomorrow Will Never Die
----------------------------------------
Bug #2529: Sundance network adapter is not detected and attached
http://bugs.dragonflybsd.org/issues/2529

Author: kworr
Status: New
Priority: Low
Assignee: 
Category: 
Target version: 


I have one of those ASUS NX1001 cards with Sundance controller. Current version doesn't correctly detects it.

pciconf -lv (snip):
none6 at pci0:2:6:0:       class=0x020000 card=0x82131043 chip=0x020013f0 rev=0x31 hdr=0x00
    vendor     = 'Sundance Technology Inc / IC Plus Corp'
    device     = 'IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY'
    class      = network
    subclass   = ethernet

In current FreeBSD (RELENG_9) it is detected as:

ste0: <Sundance ST201 10/100BaseTX> port 0xd100-0xd17f mem 0xfe920000-0xfe9201ff irq 20 at device 6.0 on pci2
ste0: Ethernet address: 00:26:18:eb:37:85
miibus1: <MII bus> on ste0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus1
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto


-- 
You have received this notification because you have either subscribed to it, or are involved in it.
To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account



More information about the Bugs mailing list