[DragonFlyBSD - Bug #2414] Lenovo S10 acpi freeze (not new)
Sepherosa Ziehau via Redmine
bugtracker-admin at leaf.dragonflybsd.org
Sun Sep 2 03:38:19 PDT 2012
Issue #2414 has been updated by Sepherosa Ziehau.
On Sat, Sep 1, 2012 at 9:24 AM, David Shao via Redmine
<bugtracker-admin at leaf.dragonflybsd.org> wrote:
>
> Issue #2414 has been updated by David Shao.
>
>
> Lenovo S10 still locks up same place. Here are parts of a verbose dmesg from FreeBSD 9.1 RC1:
Could you show me where does it locks up?
And could you test booting the box w/ hw.pci.mcfg="0" in /boot/loader.conf?
Best Regards,
sephe
>
> MP Configuration Table version 1.4 found at 0xc009fc71
> Table 'FACP' at 0x3f6e1d4d
> Table 'HPET' at 0x3f6e1e41
> Table 'MCFG' at 0x3f6e1e79
> Table 'TCPA' at 0x3f6e1eb5
> Table 'TMOR' at 0x3f6e1ee7
> Table 'APIC' at 0x3f6e1f0d
> APIC: Found table at 0x3f6e1f0d
> APIC: Using the MADT enumerator.
> MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
> SMP: Added CPU 0 (AP)
> MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
> SMP: Added CPU 1 (AP)
> ...
> ACPI: RSDP 0xf7a50 00024 (v02 PTLTD )
> ACPI: XSDT 0x3f6da0f4 0007C (v01 LENOVO CB-01 06040000 LTP 00000000)
> ACPI: FACP 0x3f6e1d4d 000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
> ACPI: DSDT 0x3f6db2ee 069EB (v01 INTEL CALISTGA 06040000 INTL 20061109)
> ACPI: FACS 0x3f6e2fc0 00040
> ACPI: HPET 0x3f6e1e41 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
> ACPI: MCFG 0x3f6e1e79 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
> ACPI: TCPA 0x3f6e1eb5 00032 (v01 PTLTD CALISTGA 06040000 PTL 00000001)
> ACPI: TMOR 0x3f6e1ee7 00026 (v01 PTLTD 06040000 PTL 00000003)
> ACPI: APIC 0x3f6e1f0d 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
> ACPI: BOOT 0x3f6e1f75 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
> ACPI: ASF! 0x3f6e1f9d 00063 (v16 CETP CETP 06040000 PTL 00000001)
> ACPI: SSDT 0x3f6da70c 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
> ACPI: SSDT 0x3f6da666 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
> ACPI: SSDT 0x3f6da170 004F6 (v02 PmRef CpuPm 00003000 INTL 20050624)
> MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
> ioapic0: Routing external 8259A's -> intpin 0
> lapic0: Routing NMI -> LINT1
> lapic0: LINT1 trigger: edge
> lapic0: LINT1 polarity: high
> lapic1: Routing NMI -> LINT1
> lapic1: LINT1 trigger: edge
> lapic1: LINT1 polarity: high
> MADT: Interrupt override: source 0, irq 2
> ioapic0: Routing IRQ 0 -> intpin 2
> MADT: Interrupt override: source 9, irq 9
> ioapic0: intpin 9 trigger: level
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> cpu0 BSP:
> ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> timer: 0x000100ef therm: 0x00000200 err: 0x000000f0 pmc: 0x00010400
> wlan: <802.11 Link Layer>
> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
> feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
> random: <entropy source, Software, Yarrow>
> nfslock: pseudo-device
> kbd: new array size 4
> kbd1 at kbdmux0
> mem: <memory>
> Pentium Pro MTRR support enabled
> VESA: INT 0x10 vector 0xc000:0x0014
> ...
> null: <null device, zero device>
> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
> acpi0: <LENOVO CB-01> on motherboard
> PCIe: Memory Mapped configuration base @ 0xe0000000
> pcibios: BIOS version 3.00
> ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
> acpi0: Power Button (fixed)
> acpi0: wakeup code va 0xd9301000 pa 0x9e000
> hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route
> hpet0: t0: irqs 0x00f00000 (0), 64bit, periodic
> hpet0: t1: irqs 0x00f00000 (0)
> hpet0: t2: irqs 0x00f00800 (0)
> Timecounter "HPET" frequency 14318180 Hz quality 950
> ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 49
> Event timer "HPET" frequency 14318180 Hz quality 450
> Event timer "HPET1" frequency 14318180 Hz quality 440
> Event timer "HPET2" frequency 14318180 Hz quality 440
> cpu0: Processor \\_PR_.CPU0 (ACPI ID 0) -> APIC ID 0
> cpu0: <ACPI CPU> on acpi0
> ACPI: SSDT 0x3f6dafd5 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT 0 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
> ACPI: SSDT 0x3f6da96b 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT 0 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
> cpu1: Processor \\_PR_.CPU1 (ACPI ID 1) -> APIC ID 1
> cpu1: <ACPI CPU> on acpi0
> ACPI: SSDT 0x3f6db21a 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT 0 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
> ACPI: SSDT 0x3f6daf50 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT 0 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
> atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
> atrtc0: Warning: Couldn't map I/O.
> atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
> ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 50
> Event timer "RTC" frequency 32768 Hz quality 0
> attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 51
> Event timer "i8254" frequency 1193182 Hz quality 100
> ACPI timer: 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 -> 10
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
>
>
> ----------------------------------------
> Bug #2414: Lenovo S10 acpi freeze (not new)
> http://bugs.dragonflybsd.org/issues/2414
>
> Author: David Shao
> Status: New
> Priority: Normal
> Assignee:
> Category:
> Target version:
>
>
> The Lenovo S10 is a netbook that apparently uses an Intel 945 express chipset.
> I can't say any recent update has broken booting when acpi is enabled: acpi has never functioned for DragonFly.
>
> Using master through 859bc3f7658630c523bbad944a2b95089f48de46 tcp: RFC3517bis is now officially RFC6675
>
> Locks up after booting with acpi enabled at:
>
> cryptosoft0: <software crypto> [attached!] on motherboard
> acpi0.nexus0.root0
> acpi0: <LENOVO CB-01> [tentative on motherboard]
> ndepotmags=6 x mag_cap=22 for Acpi-Namespace
> ndepotmags=6 x mag_cap=22 for Acpi-State
> ndepotmags=6 x mag_cap=22 for Acpi-Parse
> ndepotmags=6 x mag_cap=22 for Acpi-ParseExt
> ndepotmags=6 x mag_cap=22 for Acpi-Operand
> IOAPIC: irq9, gsi 9 edge/high -> level/low
>
> Here are some pieces from dmesg after booting with acpi disabled:
>
> ACPI SDT: RSDP not in EBDA
> ACPI SDT: RSDP in BIOS mem
> ACPI FADT: SCI irq 9, level/low
> MPTABLE: warning duplicated PCI int entry for bus 0, dev 29, pin 0
> MPTABLE: warning duplicated PCI int entry for bus 0, dev 31, pin 1
> MPTABLE: warning duplicated PCI int entry for bus 0, dev 31, pin 1
> ...
> CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (1596.02-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x106c2 Stepping = 2
> Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Features2=0x40c39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE>
> AMD Features=0x100000<NX>
> AMD Features2=0x1<LAHF>
> ...
> ACPI MADT: LAPIC address 0xfee00000, flags 0x1
> ACPI MADT: BSP apic id 0
> ACPI MADT: cpu id 0, apic id 0
> ACPI MADT: cpu id 1, apic id 1
> lapic: divisor index 0, frequency 66500312 Hz
> SMP: CPU0 apic_initialize():
> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> SMP: Waiting APs LAPIC initialization
> SMP: CPU1 apic_initialize():
> lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
> ACPI MADT: warning invalid intsrc irq 9 trig, level
> ACPI MADT: IOAPIC addr 0xfec00000, apic id 2, gsi base 0
> ACPI MADT: INTSRC irq 0 -> gsi 2 edge/high
> ...
> IOAPIC: irq 9, gsi 9 -> cpu0 (sci)
> IOAPIC: irq 9 -> gsi 9 edge/high
> ...
> IOAPIC: legacy irq max 24
> ...
> ELCR Found. ISA IRQs programmed as:
> 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
> E E E L E L E E E E L L E E E E
> MPTABLE: 0:28 INTA -> IOAPIC 0.17
> MPTABLE: 0:27 INTA -> IOAPIC 0.22
> MPTABLE: 0:29 INTB -> IOAPIC 0.19
> MPTABLE: 0:2 INTA -> IOAPIC 0.16
> MPTABLE: 0:28 INTB -> IOAPIC 0.16
> MPTABLE: 0:28 INTC -> IOAPIC 0.18
> MPTABLE: 0:29 INTA -> IOAPIC 0.23
> MPTABLE: 0:29 INTC -> IOAPIC 0.18
> MPTABLE: 0:29 INTD -> IOAPIC 0.16
> MPTABLE: 0:31 INTB -> IOAPIC 0.19
> MPTABLE: 2:0 INTA -> IOAPIC 0.16
> ...
> BITS within APICID: logical_CPU_bits: 1; core_bits: 0
> CPU Topology: cores_per_chip: 1; threads_per_core: 2; chips_per_package: 1;
> Start scheduler helpers on cpus:
> cpu0 - HyperThreading available. Core siblings: cpu0 cpu1
> cpu1 - HyperThreading available. Core siblings: cpu0 cpu1
> start dummy scheduler helpers on cpus: 0 1
> ...
> IOAPIC: rman cpu0 0 - 1
> IOAPIC: rman cpu0 3 - 95
> IOAPIC: rman cpu0 97 - 191
> IOAPIC: rman cpu1 24 - 95
> IOAPIC: rman cpu1 97 - 191
> npx0.nexus0.root0
> npx0: <math processor> [tentative] on motherboard
> npx0: INT 16 interface
> Using XMM optimized bcopy/copyin/copyout
> npx0: <math processor> [attached!] on motherboard
> cryptosoft0.nexus0.root0
> cryptosoft0: <software crypto> [tentative] on motherboard
> crypto: assign cryptosoft0 driver id 0, flags 234881024
> crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
> ...
> crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
> cryptosoft0: <software crypto> [attached!] on motherboard
> pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa04
> pci_open(1a): mode1res=0x80000000 (0x80000000)
> pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27ac8086)
> pcibios: BIOS version 3.00
> $PIR: checksum failed!
> pcib0.legacy0.nexus0.root0
> pcib0: <MPTABLE Host-PCI bridge> [tentative] pcibus 0 on motherboard
> pci0.pcib0.legacy0.nexus0.root0
> pci0: <PCI bus> [tentative] on pcib0
> pci0: domain=0, physical bus=0
> found-> vendor=0x8086, dev=0x27ac, revid=0x03
> domain=0, bus=0, slot=0, func=0
> class=06-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x27ae, revid=0x03
> domain=0, bus=0, slot=2, func=0
> ...
> agp0: <Intel 945GME SVGA controller> [attached!] on vgapci0
> ...
> usb0: <Intel 82801G (ICH7) USB controller> [tentative] on uhci0
>
>
>
> --
> You have received this notification because you have either subscribed to it, or are involved in it.
> To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
--
Tomorrow Will Never Die
----------------------------------------
Bug #2414: Lenovo S10 acpi freeze (not new)
http://bugs.dragonflybsd.org/issues/2414
Author: David Shao
Status: New
Priority: Normal
Assignee:
Category:
Target version:
The Lenovo S10 is a netbook that apparently uses an Intel 945 express chipset.
I can't say any recent update has broken booting when acpi is enabled: acpi has never functioned for DragonFly.
Using master through 859bc3f7658630c523bbad944a2b95089f48de46 tcp: RFC3517bis is now officially RFC6675
Locks up after booting with acpi enabled at:
cryptosoft0: <software crypto> [attached!] on motherboard
acpi0.nexus0.root0
acpi0: <LENOVO CB-01> [tentative on motherboard]
ndepotmags=6 x mag_cap=22 for Acpi-Namespace
ndepotmags=6 x mag_cap=22 for Acpi-State
ndepotmags=6 x mag_cap=22 for Acpi-Parse
ndepotmags=6 x mag_cap=22 for Acpi-ParseExt
ndepotmags=6 x mag_cap=22 for Acpi-Operand
IOAPIC: irq9, gsi 9 edge/high -> level/low
Here are some pieces from dmesg after booting with acpi disabled:
ACPI SDT: RSDP not in EBDA
ACPI SDT: RSDP in BIOS mem
ACPI FADT: SCI irq 9, level/low
MPTABLE: warning duplicated PCI int entry for bus 0, dev 29, pin 0
MPTABLE: warning duplicated PCI int entry for bus 0, dev 31, pin 1
MPTABLE: warning duplicated PCI int entry for bus 0, dev 31, pin 1
...
CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (1596.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106c2 Stepping = 2
Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40c39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE>
AMD Features=0x100000<NX>
AMD Features2=0x1<LAHF>
...
ACPI MADT: LAPIC address 0xfee00000, flags 0x1
ACPI MADT: BSP apic id 0
ACPI MADT: cpu id 0, apic id 0
ACPI MADT: cpu id 1, apic id 1
lapic: divisor index 0, frequency 66500312 Hz
SMP: CPU0 apic_initialize():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
SMP: Waiting APs LAPIC initialization
SMP: CPU1 apic_initialize():
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ACPI MADT: warning invalid intsrc irq 9 trig, level
ACPI MADT: IOAPIC addr 0xfec00000, apic id 2, gsi base 0
ACPI MADT: INTSRC irq 0 -> gsi 2 edge/high
...
IOAPIC: irq 9, gsi 9 -> cpu0 (sci)
IOAPIC: irq 9 -> gsi 9 edge/high
...
IOAPIC: legacy irq max 24
...
ELCR Found. ISA IRQs programmed as:
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
E E E L E L E E E E L L E E E E
MPTABLE: 0:28 INTA -> IOAPIC 0.17
MPTABLE: 0:27 INTA -> IOAPIC 0.22
MPTABLE: 0:29 INTB -> IOAPIC 0.19
MPTABLE: 0:2 INTA -> IOAPIC 0.16
MPTABLE: 0:28 INTB -> IOAPIC 0.16
MPTABLE: 0:28 INTC -> IOAPIC 0.18
MPTABLE: 0:29 INTA -> IOAPIC 0.23
MPTABLE: 0:29 INTC -> IOAPIC 0.18
MPTABLE: 0:29 INTD -> IOAPIC 0.16
MPTABLE: 0:31 INTB -> IOAPIC 0.19
MPTABLE: 2:0 INTA -> IOAPIC 0.16
...
BITS within APICID: logical_CPU_bits: 1; core_bits: 0
CPU Topology: cores_per_chip: 1; threads_per_core: 2; chips_per_package: 1;
Start scheduler helpers on cpus:
cpu0 - HyperThreading available. Core siblings: cpu0 cpu1
cpu1 - HyperThreading available. Core siblings: cpu0 cpu1
start dummy scheduler helpers on cpus: 0 1
...
IOAPIC: rman cpu0 0 - 1
IOAPIC: rman cpu0 3 - 95
IOAPIC: rman cpu0 97 - 191
IOAPIC: rman cpu1 24 - 95
IOAPIC: rman cpu1 97 - 191
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
npx0: <math processor> [attached!] on motherboard
cryptosoft0.nexus0.root0
cryptosoft0: <software crypto> [tentative] on motherboard
crypto: assign cryptosoft0 driver id 0, flags 234881024
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
...
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
cryptosoft0: <software crypto> [attached!] on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa04
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27ac8086)
pcibios: BIOS version 3.00
$PIR: checksum failed!
pcib0.legacy0.nexus0.root0
pcib0: <MPTABLE Host-PCI bridge> [tentative] pcibus 0 on motherboard
pci0.pcib0.legacy0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x27ac, revid=0x03
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27ae, revid=0x03
domain=0, bus=0, slot=2, func=0
...
agp0: <Intel 945GME SVGA controller> [attached!] on vgapci0
...
usb0: <Intel 82801G (ICH7) USB controller> [tentative] on uhci0
--
You have received this notification because you have either subscribed to it, or are involved in it.
To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
More information about the Bugs
mailing list