panic: npxintr from nowhere

bleader bleader at ratonland.org
Mon Nov 23 12:21:10 PST 2009


Hi,

I'm trying to install DragonFly BSD onto a small geode based board
(http://www.pcengines.ch/alix2c3.htm if this can be of any use).

I'm booting up a laptop with the live CD, running the "Setup NetBoot
Install Services" to boot from PXE. Just to ensure this wasn't in a
given version I tried with:
- 2.2.1
- 2.4.1
- LATEST downloaded on 23th of november

Attached is the full dmesg, here are a few hilights:

npx0: <math processor> on motherboard
npx0: error reporting broken; using 387 emulator

npxintr: npxthread = 0, curthread = 0xc168c6f0, npx_exists = 0
panic: npxintr from nowhere
Trace beginning at frame 0xccc4ccf4
panic(ccc4cd18,c168c6f0,bfbffce0,bfbffcd0,ccc4cd30) at panic+0x8c
panic(c05acd1b,c05f199c,0,c168c6f0,0) at panic+0x8c
npx_intr(0) at npx_intr+0xd6
Xfpu() at Xfpu+0x2e
Debugger("panic")

-- 
bleader
 .ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄؿ
 .                                         .
 .                                         .
 .                                         .
 .          Welcome to DragonFly!          . ,--,           |           ,--,
 .                                         . |   `-,       ,^,       ,-'   |
 .                                         .  `,    `-,   (/ \)   ,-'    ,'
 .  1. Boot DragonFly [default]            .    `-,    `-,/   \,-'    ,-'
 .  2. Boot DragonFly with ACPI enabled    .       `------(   )------'
 .  3. Boot DragonFly in Safe Mode         .   ,----------(   )----------,
 .  4. Boot DragonFly in single user mode  .  |        _,-(   )-,_        |
 .  5. Boot DragonFly with verbose logging .   `-,__,-'   \   /   `-,__,-'
 .  6. Boot DragonFly without AHCI driver  .               | |
 .  7. Escape to loader prompt             .               | |
 .  8. Reboot                              .               | |
 .                                         .               | |
 .                                         .               | |
 .                                         .               | |
 .  Select option, [Enter] for default     .               `|'
 .  or [Space] to pause timer  8           .
 .ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ.


Copyright (c) 2003-2009 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly v2.5.1.282.g0ce44-DEVELOPMENT #0: Sun Nov 22 08:04:05 UTC 2009
    root at chlamydia.fs.ei.tum.de:/usr/obj/usr/src/sys/GENERIC
TSC clock: 497990134 Hz, i8254 clock: 1193039 Hz
CPU: Geode(TM) Integrated Processor by AMD PCS (498.05-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x5a2  Stepping = 2
  Features=0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 268435456 (262144K bytes)
avail memory = 247435264 (241636K bytes)
pnpbios: Bad PnP BIOS data checksum
kbd0 at kbdmux0
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: error reporting broken; using 387 emulator
cryptosoft0: <software crypto> on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <encrypt/decrypt, entertainment crypto> (vendor 0x1022, dev 0x2082) at device 1.2 irq 9
vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1000-0x10ff mem 0xe0000000-0xe00000ff irq 10 at device 9.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: MAC address: 00:0d:b9:18:1b:9c
vr1: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1400-0x14ff mem 0xe0040000-0xe00400ff irq 11 at device 10.0 on pci0
miibus1: <MII bus> on vr1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1: MAC address: 00:0d:b9:18:1b:9d
vr2: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1800-0x18ff mem 0xe0080000-0xe00800ff irq 15 at device 11.0 on pci0
miibus2: <MII bus> on vr2
ukphy2: <Generic IEEE 802.3u media interface> on miibus2
ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr2: MAC address: 00:0d:b9:18:1b:9e
isab0: <PCI-ISA bridge> port 0x9c00-0x9c3f,0x9d00-0x9d7f,0x6200-0x623f,0x6100-0x61ff,0x6000-0x6007 at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD ATA controller> port 0xff00-0xff0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.2 on pci0
ata0: <ATA channel 0> on atapci0
ad0: 7647MB <TRANSCEND 20070831> at ata0-master UDMA33
ata1: <ATA channel 1> on atapci0
ohci0: <AMD CS5536 [geode companion] USB Controller> mem 0xefffe000-0xefffefff irq 12 at device 15.4 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AMD CS5536 [geode companion] USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: <AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> (vendor 0x1022, dev 0x2095) at device 15.5 irq 12
orm0: <Option ROM> at iomem 0xe0000-0xea7ff on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
device_probe_and_attach: vga0 attach returned 6
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
ip: MPSAFE
arp: MPSAFE
CAM: Configuring 2 busses
CAM: finished configuring all busses (0 left)
Mounting root from cd9660:/dev/acd0a
tryroot acd0a
no disk named 'acd0a'
setrootbyname failed
iso_mountroot: can't find rootvp
Root mount failed: 6
Mounting root from nfs:
nfs_mountroot: interface vr0 ip 10.1.0.128 bcast 10.1.0.255 mask 255.255.255.0
NFS_ROOT: 10.1.0.1:/
Mounting devfs
Interface vr0 IP-Address 10.1.0.128 Broadcast 10.1.0.255
Loading configuration files.
Loading devfs rules: /etc/defaults/devfs.conf.
npxintr: npxthread = 0, curthread = 0xc168c6f0, npx_exists = 0
panic: npxintr from nowhere
Trace beginning at frame 0xccc4ccf4
panic(ccc4cd18,c168c6f0,bfbffce0,bfbffcd0,ccc4cd30) at panic+0x8c
panic(c05acd1b,c05f199c,0,c168c6f0,0) at panic+0x8c
npx_intr(0) at npx_intr+0xd6
Xfpu() at Xfpu+0x2e
Debugger("panic")
Stopped at      Debugger+0x34:  movb    $0,in_Debugger.4274
db>




More information about the Bugs mailing list