[issue1461] Issues with latest snapshot (panic)
elekktretterr at exemail.com.au
elekktretterr at exemail.com.au
Sun Aug 23 23:25:08 PDT 2009
Managed to get the full verbose dmesg. Its attached to this email.Copyright (c) 2003-2009 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 7949e03-DEVELOPMENT #0: Sat Aug 22 01:30:43 CEST 2009
root at chlamydia.fs.ei.tum.de:/usr/obj/usr/src/sys/GENERIC
Calibrating clock(s) ... TSC clock: 2493991065 Hz, i8254 clock: 1193297 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz (2493.76-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1>
Hyperthreading: 4 logical CPUs
real memory = 1073283072 (1048128K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00855000 - 0x3ff7ffff, 1064480768 bytes (259883 pages)
avail memory = 1027813376 (1003724K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x31
pnpbios: Found PnP BIOS data at 0xc00f5d80
pnpbios: Entry = f0000:6e0a Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "/boot/kernel" at 0xc0828000.
Preloaded elf module "/boot/modules/acpi.ko" at 0xc08282c4.
crypto: <crypto core>
wlan: <802.11 Link Layer>
Pentium Pro MTRR support enabled
fildesc_drvinit() building stdin, stdout, stderr:
md0: Malloc disk
Math emulator present
ACPI: RSDP 0xf9be0 00024 (v2 HP )
ACPI: XSDT 0x3ffa0100 0007C (v1 HP ProLiant 20081002 HP 00000097)
ACPI: FACP 0x3ffa0290 000F4 (v4 HP ProLiant 20081002 HP 00000097)
ACPI: DSDT 0x3ffa0690 04EDE (v2 HP ProLiant 00000073 INTL 20051117)
ACPI: FACS 0x3ffae000 00040
ACPI: APIC 0x3ffa0390 00092 (v2 HP ProLiant 20081002 HP 00000097)
ACPI: MCFG 0x3ffa0480 0003C (v1 HP ProLiant 20081002 HP 00000097)
ACPI: SPMI 0x3ffa04c0 00041 (v5 HP ProLiant 20081002 HP 00000097)
ACPI: SLIC 0x3ffa0510 00176 (v1 HP ProLiant 20081002 HP 00000097)
ACPI: OEMB 0x3ffae040 00071 (v1 HP ProLiant 20081002 HP 00000097)
ACPI: HPET 0x3ffa5570 00038 (v1 HP ProLiant 20081002 HP 00000097)
ACPI: EINJ 0x3ffa55b0 00130 (v1 HP ProLiant 20081002 HP 00000097)
ACPI: BERT 0x3ffa5740 00030 (v1 HP ProLiant 20081002 HP 00000097)
ACPI: ERST 0x3ffa5770 001B0 (v1 HP ProLiant 20081002 HP 00000097)
ACPI: HEST 0x3ffa5920 000A8 (v1 HP ProLiant 20081002 HP 00000097)
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
npx0: <math processor> [attached!] on motherboard
acpi0.nexus0.root0
acpi0: <HP ProLiant> [tentative] on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
pci_open(1): mode 1 addr port (0x0cf8) is 0x80008058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=65c08086)
pcibios: BIOS version 3.00
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
acpi_timer0.acpi0.nexus0.root0
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x808-0x80b on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x808-0x80b on acpi0
cpu0.acpi0.nexus0.root0
cpu0: <ACPI CPU> [tentative] on acpi0
cpu_cst0.cpu0.acpi0.nexus0.root0
cpu_cst0: <ACPI CPU C-State> [tentative] on cpu0
cpu_cst0: switching to generic Cx mode
cpu_cst0: <ACPI CPU C-State> [attached!] on cpu0
cpu_pst0: Can't get _PCT package - AE_NOT_FOUND
cpu0: <ACPI CPU> [attached!] on acpi0
unknown: not probed (disabled)
acpi_button0.acpi0.nexus0.root0
acpi_button0: <Power Button> [tentative] on acpi0
acpi_button0: <Power Button> [attached!] on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: irq maps: 0 0 0 0
sio0.acpi0.nexus0.root0
sio0 [tentative] port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio0 [attached!] port 0x3f8-0x3ff irq 4 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi0: <HP ProLiant> [attached!] at irq 9 on motherboard
pcib0.legacy0.nexus0.root0
pcib0: <Host to PCI bridge> [tentative] pcibus 0 on motherboard
pir0.legacy0.nexus0.root0
pir0: <PCI Interrupt Routing Table: 21 Entries> [tentative] on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x60 255 N 17 5 6 7 10 11 12 14 15
0x61 255 N 16 5 6 7 10 11 12 14 15
0x62 255 N 19 5 6 7 10 11 12 14 15
0x63 255 N 18 5 6 7 10 11 12 14 15
0x68 255 N 1 5 6 7 10 11 12 14 15
0x6b 255 N 1 5 6 7 10 11 12 14 15
0x69 255 N 1 5 6 7 10 11 12 14 15
$PIR: Found matching pin for 0.31.INTB at func 2: 5
$PIR: Found matching pin for 0.31.INTC at func 3: 15
$PIR: Found matching pin for 0.29.INTA at func 0: 7
$PIR: Found matching pin for 0.29.INTB at func 1: 5
$PIR: Found matching pin for 0.29.INTC at func 2: 15
$PIR: Found matching pin for 0.26.INTA at func 0: 11
$PIR: Found matching pin for 0.26.INTB at func 1: 14
$PIR: Found matching pin for 0.26.INTC at func 7: 15
$PIR: Found matching pin for 0.26.INTD at func 2: 5
$PIR: Found matching pin for 0.28.INTA at func 0: 11
$PIR: Found matching pin for 0.28.INTB at func 5: 10
$PIR: Found matching pin for 7.0.INTA at func 0: 10
$PIR: Found matching pin for 8.0.INTA at func 0: 11
$PIR: Found matching pin for 5.0.INTA at func 0: 11
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x60 11 Y 17 5 6 7 10 11 12 14 15
0x61 10 Y 16 5 6 7 10 11 12 14 15
0x62 15 Y 19 5 6 7 10 11 12 14 15
0x63 5 Y 18 5 6 7 10 11 12 14 15
0x68 255 N 1 5 6 7 10 11 12 14 15
0x6b 7 Y 1 5 6 7 10 11 12 14 15
0x69 14 Y 1 5 6 7 10 11 12 14 15
$PIR: IRQs used by BIOS: 5 7 10 11 14 15
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 18 0 1 0 0 16 17 0 0 1 19 ]
pir0: <PCI Interrupt Routing Table: 21 Entries> [attached!] on motherboard
pci0.pcib0.legacy0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x65c0, revid=0x80
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
PCI Express ver.1 cap=0x0041
found-> vendor=0x8086, dev=0x65e2, revid=0x80
domain=0, bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00200c80
found-> vendor=0x8086, dev=0x65e3, revid=0x80
domain=0, bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00180c80
found-> vendor=0x8086, dev=0x65f8, revid=0x80
domain=0, bus=0, slot=4, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00300cdf[HOTPLUG]
found-> vendor=0x8086, dev=0x65e5, revid=0x80
domain=0, bus=0, slot=5, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
PCI Express ver.1 cap=0x0041
found-> vendor=0x8086, dev=0x65e6, revid=0x80
domain=0, bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00280cdf[HOTPLUG]
found-> vendor=0x8086, dev=0x65e7, revid=0x80
domain=0, bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
PCI Express ver.1 cap=0x0041
found-> vendor=0x8086, dev=0x65f0, revid=0x80
domain=0, bus=0, slot=16, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x65f0, revid=0x80
domain=0, bus=0, slot=16, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x65f0, revid=0x80
domain=0, bus=0, slot=16, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x65f1, revid=0x80
domain=0, bus=0, slot=17, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x65f3, revid=0x80
domain=0, bus=0, slot=19, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x65f5, revid=0x80
domain=0, bus=0, slot=21, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x65f6, revid=0x80
domain=0, bus=0, slot=22, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2937, revid=0x02
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0xd800, size 5, enabled
found-> vendor=0x8086, dev=0x2938, revid=0x02
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=14
map[20]: type I/O Port, range 32, base 0xd880, size 5, enabled
found-> vendor=0x8086, dev=0x2939, revid=0x02
domain=0, bus=0, slot=26, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
map[20]: type I/O Port, range 32, base 0xdc00, size 5, enabled
found-> vendor=0x8086, dev=0x293c, revid=0x02
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfccffc00, size 10, enabled
found-> vendor=0x8086, dev=0x2940, revid=0x02
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000560[HOTPLUG]
found-> vendor=0x8086, dev=0x2948, revid=0x02
domain=0, bus=0, slot=28, func=4
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x4810, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000560[HOTPLUG]
found-> vendor=0x8086, dev=0x294a, revid=0x02
domain=0, bus=0, slot=28, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000560[HOTPLUG]
found-> vendor=0x8086, dev=0x2934, revid=0x02
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
map[20]: type I/O Port, range 32, base 0xd080, size 5, enabled
found-> vendor=0x8086, dev=0x2935, revid=0x02
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[20]: type I/O Port, range 32, base 0xd400, size 5, enabled
found-> vendor=0x8086, dev=0x2936, revid=0x02
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
map[20]: type I/O Port, range 32, base 0xd480, size 5, enabled
found-> vendor=0x8086, dev=0x244e, revid=0x92
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0104, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2916, revid=0x02
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2920, revid=0x02
domain=0, bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xc000, size 3, enabled
map[14]: type I/O Port, range 32, base 0xbc00, size 2, enabled
map[18]: type I/O Port, range 32, base 0xb880, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xb800, size 2, enabled
map[20]: type I/O Port, range 32, base 0xb480, size 4, enabled
map[24]: type I/O Port, range 32, base 0xb400, size 4, enabled
found-> vendor=0x8086, dev=0x2930, revid=0x02
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
map[10]: type Memory, range 64, base 0xffffffc00, size 8, enabled
pci0: pci0:0:31:3 bar 0x10 too many address bits map[20]: type I/O Port, range 32, base 0x400, size 5, enabled
found-> vendor=0x8086, dev=0x2926, revid=0x02
domain=0, bus=0, slot=31, func=5
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xd000, size 3, enabled
map[14]: type I/O Port, range 32, base 0xcc00, size 2, enabled
map[18]: type I/O Port, range 32, base 0xc880, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xc800, size 2, enabled
map[20]: type I/O Port, range 32, base 0xc480, size 4, enabled
map[24]: type I/O Port, range 32, base 0xc400, size 4, enabled
pcib1.pci0.pcib0.legacy0.nexus0.root0
pcib1: <PCIBIOS PCI-PCI bridge> [tentative] at device 2.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x0-0x0
pcib1: no prefetched decode
pci1.pcib1.pci0.pcib0.legacy0.nexus0.root0
pci1: <PCI bus> [tentative] on pcib1
pci1: domain=0, physical bus=1
pci1: <PCI bus> [attached!] on pcib1
pcib1: <PCIBIOS PCI-PCI bridge> [attached!] at device 2.0 on pci0
pcib2.pci0.pcib0.legacy0.nexus0.root0
pcib2: <PCIBIOS PCI-PCI bridge> [tentative] at device 3.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x0
pcib2: no prefetched decode
pci2.pcib2.pci0.pcib0.legacy0.nexus0.root0
pci2: <PCI bus> [tentative] on pcib2
pci2: domain=0, physical bus=2
pci2: <PCI bus> [attached!] on pcib2
pcib2: <PCIBIOS PCI-PCI bridge> [attached!] at device 3.0 on pci0
pcib3.pci0.pcib0.legacy0.nexus0.root0
pcib3: <PCIBIOS PCI-PCI bridge> [tentative] at device 4.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x0-0x0
pcib3: no prefetched decode
pcib3: Disable PCI Express hot-plug interrupts(0x002f)
pci3.pcib3.pci0.pcib0.legacy0.nexus0.root0
pci3: <PCI bus> [tentative] on pcib3
pci3: domain=0, physical bus=3
pci3: <PCI bus> [attached!] on pcib3
pcib3: <PCIBIOS PCI-PCI bridge> [attached!] at device 4.0 on pci0
pcib4.pci0.pcib0.legacy0.nexus0.root0
pcib4: <PCI-PCI bridge> [tentative] at device 5.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0x0-0x0
pcib4: no prefetched decode
pci4.pcib4.pci0.pcib0.legacy0.nexus0.root0
pci4: <PCI bus> [tentative] on pcib4
pci4: domain=0, physical bus=4
pci4: <PCI bus> [attached!] on pcib4
pcib4: <PCI-PCI bridge> [attached!] at device 5.0 on pci0
pcib5.pci0.pcib0.legacy0.nexus0.root0
pcib5: <PCIBIOS PCI-PCI bridge> [tentative] at device 6.0 on pci0
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0xe000-0xefff
pcib5: memory decode 0xfcd00000-0xfcefffff
pcib5: no prefetched decode
pcib5: Disable PCI Express hot-plug interrupts(0x002f)
pci5.pcib5.pci0.pcib0.legacy0.nexus0.root0
pci5: <PCI bus> [tentative] on pcib5
pci5: domain=0, physical bus=5
found-> vendor=0x103c, dev=0x3230, revid=0x03
domain=0, bus=5, slot=0, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D3 current D0
MSI-X supports 4 messages in map 0x10
PCI Express ver.1 cap=0x0001[DEVICE]
map[10]: type Memory, range 64, base 0xfce00000, size 20, enabled
pcib5: requested memory range 0xfce00000-0xfcefffff: good
map[18]: type I/O Port, range 32, base 0xe800, size 8, enabled
pcib5: requested I/O range 0xe800-0xe8ff: in range
map[1c]: type Memory, range 64, base 0xfcdff000, size 12, enabled
pcib5: requested memory range 0xfcdff000-0xfcdfffff: good
ciss0.pci5.pcib5.pci0.pcib0.legacy0.nexus0.root0
ciss0: <HP Smart Array P400> [tentative] port 0xe800-0xe8ff mem 0xfcdff000-0xfcdfffff,0xfce00000-0xfcefffff irq 11 at device 0.0 on pci5
ciss0: Reserved 0x100000 bytes for rid 0x10 type 3 at 0xfce00000
ciss0: using 256 of 1024 available commands
ciss0: firmware 4.12
ciss0: 1 SCSI channels
ciss0: signature 'CISS'
ciss0: valence 3
ciss0: supported I/O methods 0x80000006<simple,performant>
ciss0: active I/O method 0x3<simple>
ciss0: 4G page base 0x00000000
ciss0: interrupt coalesce delay 1000us
ciss0: interrupt coalesce count 16
ciss0: max outstanding commands 1024
ciss0: bus types 0x200000
ciss0: server name ''
ciss0: heartbeat 0xdc
ciss0: 4 physical devices
ciss0: 1 logical drive
ciss0: logical drive (b0t0): RAID 5, 858112MB online
ciss0: <HP Smart Array P400> [attached!] port 0xe800-0xe8ff mem 0xfcdff000-0xfcdfffff,0xfce00000-0xfcefffff irq 11 at device 0.0 on pci5
pci5: <PCI bus> [attached!] on pcib5
pcib5: <PCIBIOS PCI-PCI bridge> [attached!] at device 6.0 on pci0
pcib6.pci0.pcib0.legacy0.nexus0.root0
pcib6: <PCI-PCI bridge> [tentative] at device 7.0 on pci0
pcib6: domain 0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0x0-0x0
pcib6: no prefetched decode
pci6.pcib6.pci0.pcib0.legacy0.nexus0.root0
pci6: <PCI bus> [tentative] on pcib6
pci6: domain=0, physical bus=6
pci6: <PCI bus> [attached!] on pcib6
pcib6: <PCI-PCI bridge> [attached!] at device 7.0 on pci0
uhci0.pci0.pcib0.legacy0.nexus0.root0
uhci0: <Intel 82801I (ICH9) USB controller> [tentative] port 0xd800-0xd81f irq 11 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800
usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0
usb0: <Intel 82801I (ICH9) USB controller> [tentative] on uhci0
usb0: USB revision 1.0
uhub0.usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0
uhub0: 2 ports with 2 removable, self powered
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0
usb0: <Intel 82801I (ICH9) USB controller> [attached!] on uhci0
uhci0: <Intel 82801I (ICH9) USB controller> [attached!] port 0xd800-0xd81f irq 11 at device 26.0 on pci0
uhci1.pci0.pcib0.legacy0.nexus0.root0
uhci1: <Intel 82801I (ICH9) USB controller> [tentative] port 0xd880-0xd89f irq 14 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd880
usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
usb1: <Intel 82801I (ICH9) USB controller> [tentative] on uhci1
usb1: USB revision 1.0
uhub1.usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1
uhub1: 2 ports with 2 removable, self powered
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1
usb1: <Intel 82801I (ICH9) USB controller> [attached!] on uhci1
uhci1: <Intel 82801I (ICH9) USB controller> [attached!] port 0xd880-0xd89f irq 14 at device 26.1 on pci0
uhci2.pci0.pcib0.legacy0.nexus0.root0
uhci2: <Intel 82801I (ICH9) USB controller> [tentative] port 0xdc00-0xdc1f irq 5 at device 26.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdc00
usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0
usb2: <Intel 82801I (ICH9) USB controller> [tentative] on uhci2
usb2: USB revision 1.0
uhub2.usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb2
uhub2: 2 ports with 2 removable, self powered
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb2
usb2: <Intel 82801I (ICH9) USB controller> [attached!] on uhci2
uhci2: <Intel 82801I (ICH9) USB controller> [attached!] port 0xdc00-0xdc1f irq 5 at device 26.2 on pci0
pci0: <serial bus, USB> (vendor 0x8086, dev 0x293c) at device 26.7 irq 15
pcib7.pci0.pcib0.legacy0.nexus0.root0
pcib7: <PCIBIOS PCI-PCI bridge> [tentative] irq 11 at device 28.0 on pci0
pcib7: domain 0
pcib7: secondary bus 9
pcib7: subordinate bus 9
pcib7: I/O decode 0x0-0x0
pcib7: no prefetched decode
pci9.pcib7.pci0.pcib0.legacy0.nexus0.root0
pci9: <PCI bus> [tentative] on pcib7
pci9: domain=0, physical bus=9
pci9: <PCI bus> [attached!] on pcib7
pcib7: <PCIBIOS PCI-PCI bridge> [attached!] irq 11 at device 28.0 on pci0
pcib8.pci0.pcib0.legacy0.nexus0.root0
pcib8: <PCIBIOS PCI-PCI bridge> [tentative] irq 11 at device 28.4 on pci0
pcib8: domain 0
pcib8: secondary bus 8
pcib8: subordinate bus 8
pcib8: I/O decode 0xf000-0xfff
pcib8: memory decode 0xfd000000-0xfdffffff
pcib8: prefetched decode 0xfb000000-0xfbffffff
pci8.pcib8.pci0.pcib0.legacy0.nexus0.root0
pci8: <PCI bus> [tentative] on pcib8
pci8: domain=0, physical bus=8
found-> vendor=0x102b, dev=0x0522, revid=0x02
domain=0, bus=8, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x1010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
PCI Express ver.1 cap=0x0011[LEGDEV]
map[10]: type Prefetchable Memory, range 32, base 0xfb000000, size 24, enabled
pcib8: requested memory range 0xfb000000-0xfbffffff: good
map[14]: type Memory, range 32, base 0xfdffc000, size 14, enabled
pcib8: requested memory range 0xfdffc000-0xfdffffff: good
map[18]: type Memory, range 32, base 0xfd000000, size 23, enabled
pcib8: requested memory range 0xfd000000-0xfd7fffff: good
vgapci0.pci8.pcib8.pci0.pcib0.legacy0.nexus0.root0
vgapci0: <VGA-compatible display> [tentative] mem 0xfd000000-0xfd7fffff,0xfdffc000-0xfdffffff,0xfb000000-0xfbffffff irq 11 at device 0.0 on pci8
vgapci0: <VGA-compatible display> [attached!] mem 0xfd000000-0xfd7fffff,0xfdffc000-0xfdffffff,0xfb000000-0xfbffffff irq 11 at device 0.0 on pci8
pci8: <PCI bus> [attached!] on pcib8
pcib8: <PCIBIOS PCI-PCI bridge> [attached!] irq 11 at device 28.4 on pci0
pcib9.pci0.pcib0.legacy0.nexus0.root0
pcib9: <PCIBIOS PCI-PCI bridge> [tentative] irq 10 at device 28.5 on pci0
pcib9: domain 0
pcib9: secondary bus 7
pcib9: subordinate bus 7
pcib9: I/O decode 0x0-0x0
pcib9: memory decode 0xfcf00000-0xfcffffff
pcib9: no prefetched decode
pci7.pcib9.pci0.pcib0.legacy0.nexus0.root0
pci7: <PCI bus> [tentative] on pcib9
pci7: domain=0, physical bus=7
found-> vendor=0x14e4, dev=0x165a, revid=0x00
domain=0, bus=7, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
PCI Express ver.1 cap=0x0001[DEVICE]
map[10]: type Memory, range 64, base 0xfcff0000, size 16, enabled
pcib9: requested memory range 0xfcff0000-0xfcffffff: good
bge0.pci7.pcib9.pci0.pcib0.legacy0.nexus0.root0
bge0: <Broadcom BCM5722 Gigabit Ethernet> [tentative] mem 0xfcff0000-0xfcffffff irq 10 at device 0.0 on pci7
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfcff0000
bge0: adjust device control 0x2000 -> 0x5000
bge0: CHIP ID 0xa2000000; ASIC REV 0x0a; CHIP REV 0xa2; PCI-E
bge0: Disabling fastboot
alignment check failed
miibus0.bge0.pci7.pcib9.pci0.pcib0.legacy0.nexus0.root0
miibus0: <MII bus> [tentative] on bge0
ukphy0.miibus0.bge0.pci7.pcib9.pci0.pcib0.legacy0.nexus0.root0
ukphy0: <Generic IEEE 802.3u media interface> [tentative] on miibus0
ukphy0: OUI 0x0050ef, model 0x002d, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ukphy0: <Generic IEEE 802.3u media interface> [attached!] on miibus0
miibus0: <MII bus> [attached!] on bge0
md0: reading primary partition table: error accessing offset 000000000000 for 512
bge0: bpf attached
bge0: MAC address: 00:21:5a:bc:34:29
bge0: <Broadcom BCM5722 Gigabit Ethernet> [attached!] mem 0xfcff0000-0xfcffffff irq 10 at device 0.0 on pci7
pci7: <PCI bus> [attached!] on pcib9
pcib9: <PCIBIOS PCI-PCI bridge> [attached!] irq 10 at device 28.5 on pci0
uhci3.pci0.pcib0.legacy0.nexus0.root0
uhci3: <Intel 82801I (ICH9) USB controller> [tentative] port 0xd080-0xd09f irq 7 at device 29.0 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd080
usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0
usb3: <Intel 82801I (ICH9) USB controller> [tentative] on uhci3
usb3: USB revision 1.0
uhub3.usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb3
uhub3: 2 ports with 2 removable, self powered
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb3
usb3: <Intel 82801I (ICH9) USB controller> [attached!] on uhci3
uhci3: <Intel 82801I (ICH9) USB controller> [attached!] port 0xd080-0xd09f irq 7 at device 29.0 on pci0
uhci4.pci0.pcib0.legacy0.nexus0.root0
uhci4: <Intel 82801I (ICH9) USB controller> [tentative] port 0xd400-0xd41f irq 5 at device 29.1 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400
usb4.uhci4.pci0.pcib0.legacy0.nexus0.root0
usb4: <Intel 82801I (ICH9) USB controller> [tentative] on uhci4
usb4: USB revision 1.0
uhub4.usb4.uhci4.pci0.pcib0.legacy0.nexus0.root0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb4
uhub4: 2 ports with 2 removable, self powered
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb4
usb4: <Intel 82801I (ICH9) USB controller> [attached!] on uhci4
uhci4: <Intel 82801I (ICH9) USB controller> [attached!] port 0xd400-0xd41f irq 5 at device 29.1 on pci0
uhci5.pci0.pcib0.legacy0.nexus0.root0
uhci5: <Intel 82801I (ICH9) USB controller> [tentative] port 0xd480-0xd49f irq 15 at device 29.2 on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd480
usb5.uhci5.pci0.pcib0.legacy0.nexus0.root0
usb5: <Intel 82801I (ICH9) USB controller> [tentative] on uhci5
usb5: USB revision 1.0
uhub5.usb5.uhci5.pci0.pcib0.legacy0.nexus0.root0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb5
uhub5: 2 ports with 2 removable, self powered
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb5
usb5: <Intel 82801I (ICH9) USB controller> [attached!] on uhci5
uhci5: <Intel 82801I (ICH9) USB controller> [attached!] port 0xd480-0xd49f irq 15 at device 29.2 on pci0
pcib10.pci0.pcib0.legacy0.nexus0.root0
pcib10: <PCIBIOS PCI-PCI bridge> [tentative] at device 30.0 on pci0
pcib10: domain 0
pcib10: secondary bus 10
pcib10: subordinate bus 10
pcib10: I/O decode 0x0-0x0
pcib10: no prefetched decode
pcib10: Subtractively decoded bridge.
pci10.pcib10.pci0.pcib0.legacy0.nexus0.root0
pci10: <PCI bus> [tentative] on pcib10
pci10: domain=0, physical bus=10
pci10: <PCI bus> [attached!] on pcib10
pcib10: <PCIBIOS PCI-PCI bridge> [attached!] at device 30.0 on pci0
isab0.pci0.pcib0.legacy0.nexus0.root0
isab0: <PCI-ISA bridge> [tentative] at device 31.0 on pci0
isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <PCI-ISA bridge> [attached!] at device 31.0 on pci0
atapci0.pci0.pcib0.legacy0.nexus0.root0
atapci0: <Intel ICH9 SATA300 controller> [tentative] port 0xb400-0xb40f,0xb480-0xb48f,0xb800-0xb803,0xb880-0xb887,0xbc00-0xbc03,0xc000-0xc007 irq 5 at device 31.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb480
atapci0: Reserved 0x10 bytes for rid 0x24 type 4 at 0xb400
ata2.atapci0.pci0.pcib0.legacy0.nexus0.root0
ata2: <ATA channel 0> [tentative] on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc000
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbc00
ata2: reset tp1 mask=03 ostat0=7f ostat1=7f
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata2: reset tp2 stat0=ff stat1=ff devices=0x0
ata2: <ATA channel 0> [attached!] on atapci0
ata3.atapci0.pci0.pcib0.legacy0.nexus0.root0
ata3: <ATA channel 1> [tentative] on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xb880
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb800
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: <ATA channel 1> [attached!] on atapci0
atapci0: <Intel ICH9 SATA300 controller> [attached!] port 0xb400-0xb40f,0xb480-0xb48f,0xb800-0xb803,0xb880-0xb887,0xbc00-0xbc03,0xc000-0xc007 irq 5 at device 31.2 on pci0
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x2930) at device 31.3 irq 15
atapci1.pci0.pcib0.legacy0.nexus0.root0
atapci1: <Intel ICH9 SATA300 controller> [tentative] port 0xc400-0xc40f,0xc480-0xc48f,0xc800-0xc803,0xc880-0xc887,0xcc00-0xcc03,0xd000-0xd007 irq 5 at device 31.5 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc480
atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0xc400
ata4.atapci1.pci0.pcib0.legacy0.nexus0.root0
ata4: <ATA channel 0> [tentative] on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd000
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xcc00
ata4: reset tp1 mask=03 ostat0=00 ostat1=00
ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata4: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata4: reiniting channel ..
ata4: reset tp1 mask=03 ostat0=00 ostat1=00
ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata4: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata4: reinit done ..
ukbd0.uhub3.usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0
ukbd0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> [tentative] on uhub3
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
ukbd0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> [attached!] on uhub3
ums0.uhub3.usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0
ums0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> [tentative] on uhub3
ums0: 8 buttons and Z dir.
ums0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> [attached!] on uhub3
ata4: reiniting channel ..
ata4: reset tp1 mask=03 ostat0=00 ostat1=00
ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata4: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata4: reinit done ..
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
acd0: <Optiarc DVD RW AD-7561S/AH52> DVDR drive at ata4 as master
acd0: read 4134KB/s (4134KB/s) write 1722KB/s (1722KB/s), 2048KB buffer, SATA150
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-RW 120mm data disc
ata4: <ATA channel 0> [attached!] on atapci1
ata5.atapci1.pci0.pcib0.legacy0.nexus0.root0
ata5: <ATA channel 1> [tentative] on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc880
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc800
ata5: reset tp1 mask=03 ostat0=7f ostat1=7f
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata5: reset tp2 stat0=ff stat1=ff devices=0x0
ata5: <ATA channel 1> [attached!] on atapci1
atapci1: <Intel ICH9 SATA300 controller> [attached!] port 0xc400-0xc40f,0xc480-0xc48f,0xc800-0xc803,0xc880-0xc887,0xcc00-0xcc03,0xd000-0xd007 irq 5 at device 31.5 on pci0
pci0: <PCI bus> [attached!] on pcib0
pcib0: <Host to PCI bridge> [attached!] pcibus 0 on motherboard
ex_isa_identify()
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
sio-: sio0 exists, using next available unit number
sio-: sio1 exists, using next available unit number
sio-: sio2 exists, using next available unit number
sio-: sio3 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
pmtimer0 [tentative] on isa0
pmtimer0 [attached!] on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 [tentative] failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
adv0 [tentative] failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 [tentative] failed to probe at port 0x134-0x137 on isa0
aic0 [tentative] failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> [tentative] failed to probe at port 0x60 on isa0
vga0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
sc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
sio1 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio2: can't drain, serial port might not exist, disabling
sio2 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio3: not probed (disabled)
sio4: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fffe20 0..1023=1024 cylinders, 0..254=255 heads, 1..32=32 sectors
0 accounted for
Device configuration finished.
acd0: reading primary partition table: error accessing offset 000000000000 for 2048
sl0: bpf attached
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
faith0: bpf attached
lo0: bpf attached
(probe0:ata2:0:0:0): error 22
(probe0:ata2:0:0:0): Unretryable Error
ppp0: bpf attached
ip: MPSAFE
arp: MPSAFE
(probe1:ata2:0:0:0): error 22
(probe1:ata2:0:0:0): Unretryable Error
pass0 at ciss0 bus 0 target 0 lun 0
pass0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-5 device
pass0: Serial Number PA53COMPAQ RAID
pass0: 135.168MB/s transfers
pass1 at ata2 bus 0 target 0 lun 0
pass1: <Optiarc DVD RW AD-7561S AH52> Removable CD-ROM SCSI-0 device
pass1: 3.300MB/s transfers
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-5 device
da0: Serial Number PA53COMPAQ RAID
da0: 135.168MB/s transfers
da0: 858210MB (1757614684 512 byte sectors: 255H 32S/T 65535C)
cd0 at ata2 bus 0 target 0 lun 0
cd0: <Optiarc DVD RW AD-7561S AH52> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: cd present [235950 x 2048 byte records]
bootdev: a0000075 type=117 unit=0 slice=0 part=0 major=-1
ATA PseudoRAID loaded
tempname: type 0xa5, start 63, end = 1757613311, size 1757613249 : OK
tempname: invalid primary partition table: no magic
tempname: invalid primary partition table: no magic
tempname: invalid primary partition table: no magic
Mounting root from cd9660:cd0
tryroot cd0
tempname: invalid primary partition table: no magic
tempname: invalid primary partition table: no magic
iso_mountroot(): using session at block 0
tempname: invalid primary partition table: no magic
tempname: invalid primary partition table: no magic
Mounting devfs
start_init: trying /sbin/init
tempname: invalid primary partition table: no magic
tempname: invalid primary partition table: no magic
tempname: invalid primary partition table: no magic
tempname: invalid primary partition table: no magic
tempname: invalid primary partition table: no magic
tempname: invalid primary partition table: no magic
tempname: invalid primary partition table: no magic
tempname: invalid primary partition table: no magic
tempname: invalid primary partition table: no magic
umass0.uhub4.usb4.uhci4.pci0.pcib0.legacy0.nexus0.root0
umass0: <Imation Imation USB, class 0/0, rev 2.00/1.00, addr 2> [tentative] on uhub4
umass0:6:0:-1: Attached to scbus6
umass0: <Imation Imation USB, class 0/0, rev 2.00/1.00, addr 2> [attached!] on uhub4
pass8 at umass-sim0 bus 0 target 0 lun 0
pass8: <Imation Imation USB PMAP> Removable Direct Access SCSI-0 device
pass8: 1.000MB/s transfers
da8 at umass-sim0 bus 0 target 0 lun 0
da8: <Imation Imation USB PMAP> Removable Direct Access SCSI-0 device
da8: 1.000MB/s transfers
da8: 983MB (2013184 512 byte sectors: 64H 32S/T 983C)
tempname: type 0xe, start 32, end = 2013183, size 2013152 : OK
More information about the Bugs
mailing list