[issue1158] Problems with a SATA DVD burner

Steve O'Hara-Smith steve at sohara.org
Thu Dec 11 05:54:41 PST 2008


On Thu, 11 Dec 2008 04:50:51 -0800
Jeremy Chadwick <jdc at parodius.com> wrote:

> On Thu, Dec 11, 2008 at 12:24:08PM +0000, Steve O'Hara-Smith wrote:
> > On Wed, 10 Dec 2008 23:38:08 -0000

> > 	I'm using an Asus A8V Deluxe motherboard - dmesg | grep ata
> > 
> > atapci0: <Promise PDC20378 SATA150 controller> port
> > 0x8800-0x887f,0x9000-0x900f,0x9400-0x943f mem
> > 0xfb700000-0xfb71ffff,0xfb800000-0xfb800fff irq 5 at device 8.0 on pci0
> > ata2: <ATA channel 0> on atapci0 ad4: 239372MB <Maxtor 6Y250M0
> > YAR51HW0> at ata2-master SATA150 ata3: <ATA channel 1> on atapci0 ata4:
> > YAR51HW0> <ATA channel 2> on atapci0
> > ad8: 117246MB <Maxtor 6Y120P0 YAR41BW0> at ata4-master UDMA133
> > atapci1: <VIA 6420 SATA150 controller> port
> > 0xa800-0xa8ff,0xb000-0xb00f,0xb400-0xb403,0xb800-0xb807,0xc000-0xc003,0xc400-0xc407
> > irq 10 at device 15.0 on pci0 ata5: <ATA channel 0> on atapci1 ad10:
> > 286168MB <Seagate ST3300622AS 3.AAE> at ata5-master SATA150 ata6: <ATA
> > channel 1> on atapci1 atapci2: <VIA 8237 UDMA133 controller> port
> > 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on
> > pci0 ata0: <ATA channel 0> on atapci2 ata1: <ATA channel 1> on atapci2
> > cd0 at ata4 bus 0 target 0 lun 0
> > cd1 at ata6 bus 0 target 0 lun 0
> > 
> > 	The reuse of ata4 seems odd - related or irrelevant ?
> 
> I'm trying very hard to stay out of this discussion because I'm in no
> way familiar with DFBSD's changes to ATA and ATAPI.  I am, however,
> quite familiar with ATA/SATA on FreeBSD.  One thing stands out here like
> a sore thumb:
> 
> Your SATA CD/DVD drive is connected to a Promise RAID controller.  I

	It's not actually connected to the Promise, it's connected to the
VIA controller plugged in right next to the Seagate drive. The Promise
controller has ad4 (SATA) and ad8 (PATA) connected to it, the VIA has ad10
(SATA), cd0 (SATA) and cd1 (PATA) connected to it. I am deeply suspicious
about the mention of ata4 for two different devices (ad8 and cd0) connected
to two different controllers.

> have never seen this work, and vendors even go so far to state "DO NOT
> HOOK UP CD/DVD DRIVES TO RAID CONTROLLERS".  The RAID controller is
> probably freaking out because it doesn't know how to speak ATAPI
> properly.

	It doesn't even get recognised as being present if I connect it to
the Promise RAID controller, I made that mistake when I first connected it.

-- 
C:>WIN                                      |   Directable Mirror Arrays
The computer obeys and wins.                | A better way to focus the sun
You lose and Bill collects.                 |    licences available see
                                            |    http://www.sohara.org/





More information about the Bugs mailing list