burncd error

[Matthew Dillon]

:The non-zero LBA is due to me trying this command several times on the
:same blank disk.  I am assuming that this is not causing the problem
:and don't want to waste a bunch of disks testing this out.  If this
:could be causing my problem let me know and I'll try a brand new blank
:disk.
:
:..
:Thanks,
:Joe

    Mmm.  Bad assumption.  Try a new disk, and put it in test mode so it
    doesn't actually write to the CD (so you don't wind up hucking too
    many of them into the trash).  That's -t to burncd.

					-Matt
					Matthew Dillon 
					<dillon at backplane.com>